Re: [PATCH v2 0/2] Add support to make output voltage determined by VSET2[] bits

[Mark Brown]

On Wed, Sep 30, 2015 at 03:25:48PM +0800, Wenyou Yang wrote:
> The patch is to add support to make the output voltage of ACT8865
> DC/DC regulator determined by VSET2[] bits. The DT property
> "active-semi,vsel-high" is used to specify the VSEL pin at high
> on the board. When the VSEL pin is high, output voltage is programmed
> by VSET2[] bits.

I'll apply these but they'll probably need some rework when someone
needs to support a board where the pin is connected to a GPIO and
controllable for fast voltage switching.

Attachment: signature.asc
Description: Digital signature