Re: [PATCH v4 4/4] usb: dwc2: refactor common low-level hw code to platform.c

[John Youn]

On 10/2/2015 12:45 AM, Marek Szyprowski wrote:
> DWC2 module on some platforms needs three additional hardware
> resources: phy controller, clock and power supply. All of them must be
> enabled/activated to properly initialize and operate. This was initially
> handled in s3c-hsotg driver, which has been converted to 'gadget' part
> of dwc2 driver. Unfortunately, not all of this code got moved to common
> platform code, what resulted in accessing DWC2 registers without
> enabling low-level hardware resources. This fails for example on Exynos
> SoCs. This patch moves all the code for managing those resources to
> common platform.c file and provides convenient wrappers for controlling
> them.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> ---
> Changelog:
> v4:
> - fixed broken conditional compilation and adjusted comments in dwc2_hsotg
>   structure documentation
> 
> v3:
> - rebased onto latest 'testing/next' from Felipe Balbi (includes
>   s3c_hsotg -> dwc2 rename)
> 
> v2:
> - moved setting of ll_hw_enabled flag to enable/disable functions,
>   as suggested by John Youn
> - moved setting of phy width to dwc2_lowlevel_init function
> ---
>  drivers/usb/dwc2/core.h     |  24 +++--
>  drivers/usb/dwc2/gadget.c   | 193 ++++--------------------------------
>  drivers/usb/dwc2/platform.c | 234 +++++++++++++++++++++++++++++++++++++-------
>  3 files changed, 228 insertions(+), 223 deletions(-)
> 

Hi Marek,

I still see lockdep warnings.

Any ideas about these?


[ 1618.179611] ======================================================
[ 1618.179612] [ INFO: possible circular locking dependency detected ]
[ 1618.179613] 4.3.0-rc3-snps-00125-g744fd93 #28 Not tainted
[ 1618.179614] -------------------------------------------------------
[ 1618.179615] modprobe/2658 is trying to acquire lock:
[ 1618.179616]  (&hsotg->init_mutex){+.+.+.}, at: [<ffffffffc043aa3c>] dwc2_hsotg_udc_start+0x5c/0x200 [dwc2]
[ 1618.179622] 
[ 1618.179622] but task is already holding lock:
[ 1618.179623]  (udc_lock){+.+.+.}, at: [<ffffffffc0374b8a>] usb_gadget_probe_driver+0x3a/0xd0 [udc_core]
[ 1618.179627] 
[ 1618.179627] which lock already depends on the new lock.
[ 1618.179627] 
[ 1618.179628] 
[ 1618.179628] the existing dependency chain (in reverse order) is:
[ 1618.179629] 
[ 1618.179629] -> #1 (udc_lock){+.+.+.}:
[ 1618.179631]        [<ffffffff810da56d>] lock_acquire+0xdd/0x1f0
[ 1618.179635]        [<ffffffff818658a6>] mutex_lock_nested+0x76/0x3e0
[ 1618.179638]        [<ffffffffc0374da7>] usb_add_gadget_udc_release+0x187/0x240 [udc_core]
[ 1618.179640]        [<ffffffffc0374e70>] usb_add_gadget_udc+0x10/0x20 [udc_core]
[ 1618.179642]        [<ffffffffc043b30c>] dwc2_gadget_init+0x47c/0x580 [dwc2]
[ 1618.179645]        [<ffffffffc042d2f2>] dwc2_driver_probe+0x422/0x4b0 [dwc2]
[ 1618.179648]        [<ffffffff8153fe94>] platform_drv_probe+0x34/0x90
[ 1618.179650]        [<ffffffff8153db54>] driver_probe_device+0x224/0x480
[ 1618.179652]        [<ffffffff8153deb1>] __device_attach_driver+0x71/0xa0
[ 1618.179654]        [<ffffffff8153b78d>] bus_for_each_drv+0x5d/0x90
[ 1618.179655]        [<ffffffff8153d83f>] __device_attach+0xbf/0x140
[ 1618.179657]        [<ffffffff8153df23>] device_initial_probe+0x13/0x20
[ 1618.179658]        [<ffffffff8153cb03>] bus_probe_device+0xa3/0xb0
[ 1618.179660]        [<ffffffff8153a76d>] device_add+0x40d/0x690
[ 1618.179661]        [<ffffffff8153fb81>] platform_device_add+0x111/0x270
[ 1618.179663]        [<ffffffffc0394128>] dwc2_pci_probe+0xe8/0x1d2 [dwc2_pci]
[ 1618.179665]        [<ffffffff81446085>] local_pci_probe+0x45/0xa0
[ 1618.179668]        [<ffffffff81447451>] pci_device_probe+0xe1/0x130
[ 1618.179669]        [<ffffffff8153db54>] driver_probe_device+0x224/0x480
[ 1618.179671]        [<ffffffff8153de38>] __driver_attach+0x88/0x90
[ 1618.179672]        [<ffffffff8153b6d6>] bus_for_each_dev+0x66/0xa0
[ 1618.179674]        [<ffffffff8153d31e>] driver_attach+0x1e/0x20
[ 1618.179675]        [<ffffffff8153ce8e>] bus_add_driver+0x1ee/0x280
[ 1618.179677]        [<ffffffff8153e930>] driver_register+0x60/0xe0
[ 1618.179678]        [<ffffffff81445a60>] __pci_register_driver+0x60/0x70
[ 1618.179680]        [<ffffffffc000601e>] 0xffffffffc000601e
[ 1618.179681]        [<ffffffff81002123>] do_one_initcall+0xb3/0x200
[ 1618.179684]        [<ffffffff811a8a41>] do_init_module+0x5f/0x1e7
[ 1618.179687]        [<ffffffff81120e48>] load_module+0x21a8/0x2840
[ 1618.179689]        [<ffffffff8112170a>] SyS_finit_module+0x9a/0xc0
[ 1618.179691]        [<ffffffff81869c36>] entry_SYSCALL_64_fastpath+0x16/0x7a
[ 1618.179693] 
[ 1618.179693] -> #0 (&hsotg->init_mutex){+.+.+.}:
[ 1618.179695]        [<ffffffff810d97f5>] __lock_acquire+0x1d35/0x1db0
[ 1618.179697]        [<ffffffff810da56d>] lock_acquire+0xdd/0x1f0
[ 1618.179698]        [<ffffffff818658a6>] mutex_lock_nested+0x76/0x3e0
[ 1618.179700]        [<ffffffffc043aa3c>] dwc2_hsotg_udc_start+0x5c/0x200 [dwc2]
[ 1618.179703]        [<ffffffffc0374a34>] udc_bind_to_driver+0xa4/0x100 [udc_core]
[ 1618.179705]        [<ffffffffc0374bca>] usb_gadget_probe_driver+0x7a/0xd0 [udc_core]
[ 1618.179707]        [<ffffffffc059a674>] usb_composite_probe+0xa4/0xc0 [libcomposite]
[ 1618.179709]        [<ffffffffc0474010>] msg_init+0x10/0x1000 [g_mass_storage]
[ 1618.179711]        [<ffffffff81002123>] do_one_initcall+0xb3/0x200
[ 1618.179713]        [<ffffffff811a8a41>] do_init_module+0x5f/0x1e7
[ 1618.179714]        [<ffffffff81120e48>] load_module+0x21a8/0x2840
[ 1618.179716]        [<ffffffff8112170a>] SyS_finit_module+0x9a/0xc0
[ 1618.179717]        [<ffffffff81869c36>] entry_SYSCALL_64_fastpath+0x16/0x7a
[ 1618.179719] 
[ 1618.179719] other info that might help us debug this:
[ 1618.179719] 
[ 1618.179720]  Possible unsafe locking scenario:
[ 1618.179720] 
[ 1618.179721]        CPU0                    CPU1
[ 1618.179722]        ----                    ----
[ 1618.179722]   lock(udc_lock);
[ 1618.179723]                                lock(&hsotg->init_mutex);
[ 1618.179725]                                lock(udc_lock);
[ 1618.179726]   lock(&hsotg->init_mutex);
[ 1618.179727] 
[ 1618.179727]  *** DEADLOCK ***
[ 1618.179727] 
[ 1618.179728] 1 lock held by modprobe/2658:
[ 1618.179729]  #0:  (udc_lock){+.+.+.}, at: [<ffffffffc0374b8a>] usb_gadget_probe_driver+0x3a/0xd0 [udc_core]
[ 1618.179732] 
[ 1618.179732] stack backtrace:
[ 1618.179734] CPU: 3 PID: 2658 Comm: modprobe Not tainted 4.3.0-rc3-snps-00125-g744fd93 #28
[ 1618.179735] Hardware name: ASUS All Series/H97M-PLUS, BIOS 2305 10/09/2014
[ 1618.179736]  ffffffff82aa4b20 ffff880215a57a20 ffffffff813f3289 ffffffff82aa4b20
[ 1618.179738]  ffff880215a57a60 ffffffff810d609c ffff880215a57ac0 ffff880213560808
[ 1618.179740]  0000000000000001 0000000000000000 ffff880213560840 ffff880213560000
[ 1618.179742] Call Trace:
[ 1618.179744]  [<ffffffff813f3289>] dump_stack+0x4b/0x72
[ 1618.179746]  [<ffffffff810d609c>] print_circular_bug+0x1ec/0x260
[ 1618.179748]  [<ffffffff810d97f5>] __lock_acquire+0x1d35/0x1db0
[ 1618.179749]  [<ffffffff81539400>] ? dev_vprintk_emit+0x90/0x240
[ 1618.179752]  [<ffffffffc0000100>] ? pps_cdev_release+0x10/0x30 [pps_core]
[ 1618.179754]  [<ffffffff810da56d>] lock_acquire+0xdd/0x1f0
[ 1618.179756]  [<ffffffffc043aa3c>] ? dwc2_hsotg_udc_start+0x5c/0x200 [dwc2]
[ 1618.179758]  [<ffffffff818658a6>] mutex_lock_nested+0x76/0x3e0
[ 1618.179760]  [<ffffffffc043aa3c>] ? dwc2_hsotg_udc_start+0x5c/0x200 [dwc2]
[ 1618.179762]  [<ffffffff8153984c>] ? __dev_printk+0x3c/0x80
[ 1618.179764]  [<ffffffffc043aa3c>] ? dwc2_hsotg_udc_start+0x5c/0x200 [dwc2]
[ 1618.179767]  [<ffffffffc043aa3c>] dwc2_hsotg_udc_start+0x5c/0x200 [dwc2]
[ 1618.179768]  [<ffffffffc0474000>] ? 0xffffffffc0474000
[ 1618.179770]  [<ffffffffc0374a34>] udc_bind_to_driver+0xa4/0x100 [udc_core]
[ 1618.179772]  [<ffffffffc0374bca>] usb_gadget_probe_driver+0x7a/0xd0 [udc_core]
[ 1618.179774]  [<ffffffffc059a674>] usb_composite_probe+0xa4/0xc0 [libcomposite]
[ 1618.179776]  [<ffffffffc0474010>] msg_init+0x10/0x1000 [g_mass_storage]
[ 1618.179777]  [<ffffffff81002123>] do_one_initcall+0xb3/0x200
[ 1618.179779]  [<ffffffff810f881d>] ? rcu_read_lock_sched_held+0x6d/0x80
[ 1618.179782]  [<ffffffff8120c064>] ? kmem_cache_alloc_trace+0x1f4/0x2d0
[ 1618.179783]  [<ffffffff811a8a41>] do_init_module+0x5f/0x1e7
[ 1618.179785]  [<ffffffff81120e48>] load_module+0x21a8/0x2840
[ 1618.179786]  [<ffffffff8111d0e0>] ? __symbol_put+0x40/0x40
[ 1618.179788]  [<ffffffff8112170a>] SyS_finit_module+0x9a/0xc0
[ 1618.179790]  [<ffffffff81869c36>] entry_SYSCALL_64_fastpath+0x16/0x7a

Regards,
John




--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/