Re: Missing operand for tlbie instruction on Power7

[Michael Ellerman]

On Fri, 2015-10-02 at 08:43 -0700, Laura Abbott wrote:
> Hi,
> 
> We received a report (https://bugzilla.redhat.com/show_bug.cgi?id=1267395) of bad assembly
> when compiling on powerpc with little endian

...

> After some discussion with the binutils folks, it turns out that the tlbie
> instruction actually requires another operand and binutils was updated to
> check for this https://sourceware.org/ml/binutils/2015-05/msg00133.html .
> 
> The code sequence in arch/powerpc/include/asm/ppc_asm.h now needs to be updated:
> 
> #if !defined(CONFIG_4xx) && !defined(CONFIG_8xx)
> #define tlbia                                   \
>          li      r4,1024;                        \
>          mtctr   r4;                             \
>          lis     r4,KERNELBASE@h;                \
> 0:      tlbie   r4;                             \
>          addi    r4,r4,0x1000;                   \
>          bdnz    0b
> #endif
> 
> I don't know enough ppc assembly to properly fix this but I can test.

How are you testing? This code is fairly old and I'm dubious if it still works.

These days we have a ppc_md hook for flushing the TLB, ppc_md.flush_tlb().
Ideally the swsusp code would use that.

cheers


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/