[PATCH] ARM: dts: omap3-lilly-a83x: Don't use IRQ level flag for a GPIO

[Javier Martinez Canillas]

The card detect GPIO is using IRQ_TYPE_LEVEL_LOW in the GPIO flag cells
but this defined constant is meant to be used for a IRQ and not a GPIO.
So instead use GPIO_ACTIVE_LOW that seems to be the original intention.

Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>

---

 arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 46f88f86a50b..57d7c93cc72b 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -284,7 +284,7 @@
 };
 
 &mmc1 {
-	cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+	cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
 	cd-inverted;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/