RE: [PATCH v3] PCI: Xilinx-NWL-PCIe: Added support for Xilinx NWL PCIe Host Controller

From: Bharat Kumar Gogada
Date: Tue Oct 06 2015 - 12:27:30 EST

Subject: Re: [PATCH v3] PCI: Xilinx-NWL-PCIe: Added support for Xilinx NWL PCIe Host Controller

Hi Bharat,

On 06/10/15 16:44, Bharat Kumar Gogada wrote:
> Adding PCIe Root Port driver for Xilinx PCIe NWL bridge IP.
>
> Signed-off-by: Bharat Kumar Gogada <bharatku@xxxxxxxxxx>
> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xxxxxxxxxx>
> ---
> Added interrupt-map, interrupt-map-mask properties
> ---
> .../devicetree/bindings/pci/xilinx-nwl-pcie.txt | 56 ++
> drivers/pci/host/Kconfig | 9 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-xilinx-nwl.c | 1029 ++++++++++++++++++++
> 4 files changed, 1095 insertions(+), 0 deletions(-) create mode
> 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> create mode 100644 drivers/pci/host/pcie-xilinx-nwl.c
>
> diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> new file mode 100644
> index 0000000..81006ab
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> @@ -0,0 +1,56 @@
> +* Xilinx NWL PCIe Root Port Bridge DT description
> +
> +Required properties:
> +- compatible: Should contain "xlnx,nwl-pcie-2.11"
> +- #address-cells: Address representation for root ports, set to <3>
> +- #size-cells: Size representation for root ports, set to <2>
> +- #interrupt-cells: specifies the number of cells needed to encode an
> + interrupt source. The value must be 1.
> +- reg: Should contain Bridge, PCIe Controller registers location,
> + configuration sapce, and length
> +- reg-names: Must include the following entries:
> + "breg": bridge registers
> + "pcireg": PCIe controller registers
> + "cfg": configuration space region
> +- device_type: must be "pci"
> +- interrupts: Should contain NWL PCIe interrupt
> +- interrupt-names: Must include the following entries:
> + "misc": interrupt asserted when miscellaneous is recieved
> + "intx": interrupt that is asserted when an legacy interrupt is received
> + "msi_1, msi_0": interrupt asserted when msi is recieved
> +- interrupt-map-mask and interrupt-map: standard PCI properties to define the
> + mapping of the PCI interface to interrupt numbers.
> +- ranges: ranges for the PCI memory regions (I/O space region is not
> + supported by hardware)
> + Please refer to the standard PCI bus binding document for a more
> + detailed explanation
> +
> +Optional properties:
> +- xlnx,msi-fifo: To enable MSI FIFO mode
> + - This feature can be used to queue multiple MSI interrupts
> +
> +Example:
> +++++++++
> +nwl_pcie: pcie@fd0e0000 {
> + compatible = "xlnx,nwl-pcie-2.11";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + device_type = "pci";
> + interrupt-parent = <&gic>;
> + interrupts = < 0 118 4
> + 0 116 4
> + 0 115 4 // MSI_1 [63...32]
> + 0 114 4 >; // MSI_0 [31...0]
> + interrupt-names = "misc", "intx", "msi_1", "msi_0";
> + interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 116 0x4
> + 0x0 0x0 0x0 0x2 &gic 0x0 116 0x4
> + 0x0 0x0 0x0 0x3 &gic 0x0 116 0x4
> + 0x0 0x0 0x0 0x4 &gic 0x0 116 0x4>;
> + reg = <0x0 0xfd0e0000 0x1000
> + 0x0 0xfd480000 0x1000
> + 0x0 0xE0000000 0x1000000>;
> + reg-names = "breg", "pcireg", "cfg";
> + ranges = <0x02000000 0x00000000 0xE1000000 0x00000000 0xE1000000 0
> +0x0F000000>; };

Please move this to a separate patch. This is big enough, and hard enough to review.

> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index
> c132bdd..7f5f35e 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -15,6 +15,15 @@ config PCI_MVEBU
> depends on ARCH_MVEBU || ARCH_DOVE
> depends on OF
>
> +config PCIE_XILINX_NWL
> + bool "NWL PCIe Core && PCI_MSI"
> + depends on ARCH_ZYNQMP
> + help
> + Say 'Y' here if you want kernel to support for Xilinx
> + NWL PCIe controller.The controller can act as Root Port
> + or End Point.The current option selection will only

Add a space after the dot.

> + support root port enabling.
> +
> config PCIE_DW
> bool
>
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 140d66f..6a56df7 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
> obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
> obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
> +obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
> obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
> obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
> obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o diff --git
> a/drivers/pci/host/pcie-xilinx-nwl.c
> b/drivers/pci/host/pcie-xilinx-nwl.c
> new file mode 100644
> index 0000000..ff25ec1
> --- /dev/null
> +++ b/drivers/pci/host/pcie-xilinx-nwl.c
> @@ -0,0 +1,1029 @@
> +/*
> + * PCIe host controller driver for NWL PCIe Bridge
> + * Based on pci-xilinx.c, pci-tegra.c
> + *
> + * (C) Copyright 2014 - 2015, Xilinx, Inc.
> + *
> + * This program is free software: you can redistribute it and/or
> +modify
> + * it under the terms of the GNU General Public License as published
> +by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_irq.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +
> +/* Bridge core config registers */
> +#define BRCFG_PCIE_RX0 0x00000000
> +#define BRCFG_PCIE_RX1 0x00000004
> +#define BRCFG_AXI_MASTER 0x00000008
> +#define BRCFG_PCIE_TX 0x0000000C
> +#define BRCFG_INTERRUPT 0x00000010
> +#define BRCFG_RAM_DISABLE0 0x00000014
> +#define BRCFG_RAM_DISABLE1 0x00000018
> +#define BRCFG_PCIE_RELAXED_ORDER 0x0000001C
> +#define BRCFG_PCIE_RX_MSG_FILTER 0x00000020
> +
> +/* Attribute registers */
> +#define NWL_ATTRIB_100 0x00000190
> +
> +/* Egress - Bridge translation registers */
> +#define E_BREG_CAPABILITIES 0x00000200
> +#define E_BREG_STATUS 0x00000204
> +#define E_BREG_CONTROL 0x00000208
> +#define E_BREG_BASE_LO 0x00000210
> +#define E_BREG_BASE_HI 0x00000214
> +#define E_ECAM_CAPABILITIES 0x00000220
> +#define E_ECAM_STATUS 0x00000224
> +#define E_ECAM_CONTROL 0x00000228
> +#define E_ECAM_BASE_LO 0x00000230
> +#define E_ECAM_BASE_HI 0x00000234
> +
> +/* Ingress - address translations */
> +#define I_MSII_CAPABILITIES 0x00000300
> +#define I_MSII_CONTROL 0x00000308
> +#define I_MSII_BASE_LO 0x00000310
> +#define I_MSII_BASE_HI 0x00000314
> +
> +#define I_ISUB_CONTROL 0x000003E8
> +#define SET_ISUB_CONTROL BIT(0)
> +/* Rxed msg fifo - Interrupt status registers */
> +#define MSGF_MISC_STATUS 0x00000400
> +#define MSGF_MISC_MASK 0x00000404
> +#define MSGF_LEG_STATUS 0x00000420
> +#define MSGF_LEG_MASK 0x00000424
> +#define MSGF_MSI_STATUS_LO 0x00000440
> +#define MSGF_MSI_STATUS_HI 0x00000444
> +#define MSGF_MSI_MASK_LO 0x00000448
> +#define MSGF_MSI_MASK_HI 0x0000044C
> +#define MSGF_RX_FIFO_POP 0x00000484
> +#define MSGF_RX_FIFO_TYPE 0x00000488
> +#define MSGF_RX_FIFO_ADDRLO 0x00000490
> +#define MSGF_RX_FIFO_ADDRHI 0x00000494
> +#define MSGF_RX_FIFO_DATA 0x00000498
> +
> +/* Msg filter mask bits */
> +#define CFG_ENABLE_PM_MSG_FWD BIT(1)
> +#define CFG_ENABLE_INT_MSG_FWD BIT(2)
> +#define CFG_ENABLE_ERR_MSG_FWD BIT(3)
> +#define CFG_ENABLE_SLT_MSG_FWD BIT(5)
> +#define CFG_ENABLE_VEN_MSG_FWD BIT(7)
> +#define CFG_ENABLE_OTH_MSG_FWD BIT(13)
> +#define CFG_ENABLE_VEN_MSG_EN BIT(14)
> +#define CFG_ENABLE_VEN_MSG_VEN_INV BIT(15)
> +#define CFG_ENABLE_VEN_MSG_VEN_ID GENMASK(31, 16)
> +#define CFG_ENABLE_MSG_FILTER_MASK (CFG_ENABLE_PM_MSG_FWD | \
> + CFG_ENABLE_INT_MSG_FWD | \
> + CFG_ENABLE_ERR_MSG_FWD | \
> + CFG_ENABLE_SLT_MSG_FWD | \
> + CFG_ENABLE_VEN_MSG_FWD | \
> + CFG_ENABLE_OTH_MSG_FWD | \
> + CFG_ENABLE_VEN_MSG_EN | \
> + CFG_ENABLE_VEN_MSG_VEN_INV | \
> + CFG_ENABLE_VEN_MSG_VEN_ID)
> +
> +/* Misc interrupt status mask bits */
> +#define MSGF_MISC_SR_RXMSG_AVAIL BIT(0)
> +#define MSGF_MISC_SR_RXMSG_OVER BIT(1)
> +#define MSGF_MISC_SR_SLAVE_ERR BIT(4)
> +#define MSGF_MISC_SR_MASTER_ERR BIT(5)
> +#define MSGF_MISC_SR_I_ADDR_ERR BIT(6)
> +#define MSGF_MISC_SR_E_ADDR_ERR BIT(7)
> +
> +#define MSGF_MISC_SR_PCIE_CORE GENMASK(18, 16)
> +#define MSGF_MISC_SR_PCIE_CORE_ERR GENMASK(31, 20)
> +
> +#define MSGF_MISC_SR_MASKALL (MSGF_MISC_SR_RXMSG_AVAIL | \
> + MSGF_MISC_SR_RXMSG_OVER | \
> + MSGF_MISC_SR_SLAVE_ERR | \
> + MSGF_MISC_SR_MASTER_ERR | \
> + MSGF_MISC_SR_I_ADDR_ERR | \
> + MSGF_MISC_SR_E_ADDR_ERR | \
> + MSGF_MISC_SR_PCIE_CORE | \
> + MSGF_MISC_SR_PCIE_CORE_ERR)
> +
> +/* Message rx fifo type mask bits */
> +#define MSGF_RX_FIFO_TYPE_MSI (1)
> +#define MSGF_RX_FIFO_TYPE_TYPE GENMASK(1, 0)
> +
> +/* Legacy interrupt status mask bits */
> +#define MSGF_LEG_SR_INTA BIT(0)
> +#define MSGF_LEG_SR_INTB BIT(1)
> +#define MSGF_LEG_SR_INTC BIT(2)
> +#define MSGF_LEG_SR_INTD BIT(3)
> +#define MSGF_LEG_SR_MASKALL (MSGF_LEG_SR_INTA | MSGF_LEG_SR_INTB | \
> + MSGF_LEG_SR_INTC | MSGF_LEG_SR_INTD)
> +
> +/* MSI interrupt status mask bits */
> +#define MSGF_MSI_SR_LO_MASK BIT(0)
> +#define MSGF_MSI_SR_HI_MASK BIT(0)
> +
> +#define MSII_PRESENT BIT(0)
> +#define MSII_ENABLE BIT(0)
> +#define MSII_STATUS_ENABLE BIT(15)
> +
> +/* Bridge config interrupt mask */
> +#define BRCFG_INTERRUPT_MASK BIT(0)
> +#define BREG_PRESENT BIT(0)
> +#define BREG_ENABLE BIT(0)
> +#define BREG_ENABLE_FORCE BIT(1)
> +
> +/* E_ECAM status mask bits */
> +#define E_ECAM_PRESENT BIT(0)
> +#define E_ECAM_SR_WR_PEND BIT(16)
> +#define E_ECAM_SR_RD_PEND BIT(0)
> +#define E_ECAM_SR_MASKALL (E_ECAM_SR_WR_PEND | E_ECAM_SR_RD_PEND)
> +#define E_ECAM_CR_ENABLE BIT(0)
> +#define E_ECAM_SIZE_LOC GENMASK(20, 16)
> +#define E_ECAM_SIZE_SHIFT 16
> +#define ECAM_BUS_LOC_SHIFT 20
> +#define ECAM_DEV_LOC_SHIFT 12
> +#define NWL_ECAM_VALUE_DEFAULT 12
> +#define NWL_ECAM_SIZE_MIN 4096
> +
> +#define ATTR_UPSTREAM_FACING BIT(6)
> +#define CFG_DMA_REG_BAR GENMASK(2, 0)
> +
> +/* msgf_rx_fifo_pop bits */
> +#define MSGF_RX_FIFO_POP_POP BIT(0)
> +
> +#define INT_PCI_MSI_NR (2 * 32)
> +
> +/* Readin the PS_LINKUP */
> +#define PS_LINKUP_OFFSET 0x00000238
> +#define PCIE_PHY_LINKUP_BIT BIT(0)
> +#define PHY_RDY_LINKUP_BIT BIT(1)
> +#define PCIE_USER_LINKUP 0
> +#define PHY_RDY_LINKUP 1
> +#define LINKUP_ITER_CHECK 5
> +
> +/* PCIE Message Request */
> +#define TX_PCIE_MSG 0x00000620
> +#define TX_PCIE_MSG_CNTL 0x00000004
> +#define TX_PCIE_MSG_SPEC_LO 0x00000008
> +#define TX_PCIE_MSG_SPEC_HI 0x0000000C
> +#define TX_PCIE_MSG_DATA 0x00000010
> +
> +#define MSG_BUSY_BIT BIT(8)
> +#define MSG_EXECUTE_BIT BIT(0)
> +#define MSG_DONE_BIT BIT(16)
> +#define MSG_DONE_STATUS_BIT (BIT(25) | BIT(24))
> +#define RANDOM_DIGIT 0x11223344
> +#define PATTRN_SSLP_TLP 0x01005074
> +
> +#define EXP_CAP_BASE 0x60
> +
> +/* SSPL ERROR */
> +#define SLVERR 0x02
> +#define DECERR 0x03
> +
> +struct nwl_msi { /* struct nwl_msi - MSI information */
> + struct msi_controller chip; /* chip: MSI controller */

We're moving away from msi_controller altogether, as the kernel now has all the necessary infrastructure to do this properly.

Our current GIC version does not have separate msi controller (we are not using GICv2m or GICv3), so is it necessary to have separate msi controller node ?
Please give me clarity on this.

Please convert this driver to msi domains (see drivers/pci/host/pci-xgene-msi.c or the gic-v2m driver as examples of how this is being done).

> + DECLARE_BITMAP(used, INT_PCI_MSI_NR); /* used: Declare Bitmap
> + for MSI */
> + struct irq_domain *domain; /* domain: IRQ domain pointer */
> + unsigned long pages; /* pages: MSI pages */
> + struct mutex lock; /* lock: mutex lock */
> + int irq_msi0; /* irq_msi0: msi0 interrupt number */
> + int irq_msi1; /* irq_msi1: msi1 interrupt number */
> +};

[...]

> +static irqreturn_t nwl_pcie_misc_handler(int irq, void *data) {
> + struct nwl_pcie *pcie = (struct nwl_pcie *)data;
> + u32 misc_stat;
> +
> + /* Checking for misc interrupts */
> + misc_stat = nwl_bridge_readl(pcie, MSGF_MISC_STATUS) &
> + MSGF_MISC_SR_MASKALL;
> + if (!misc_stat)
> + return IRQ_NONE;
> +
> + if (misc_stat & MSGF_MISC_SR_RXMSG_OVER)
> + dev_err(pcie->dev, "Received Message FIFO Overflow\n");
> +
> + if (misc_stat & MSGF_MISC_SR_SLAVE_ERR)
> + dev_err(pcie->dev, "Slave error\n");
> +
> + if (misc_stat & MSGF_MISC_SR_MASTER_ERR)
> + dev_err(pcie->dev, "Master error\n");
> +
> + if (misc_stat & MSGF_MISC_SR_I_ADDR_ERR)
> + dev_err(pcie->dev,
> + "In Misc Ingress address translation error\n");
> +
> + if (misc_stat & MSGF_MISC_SR_E_ADDR_ERR)
> + dev_err(pcie->dev,
> + "In Misc Egress address translation error\n");
> +
> + if (misc_stat & MSGF_MISC_SR_PCIE_CORE_ERR)
> + dev_err(pcie->dev, "PCIe Core error\n");
> +
> + if (pcie->enable_msi_fifo) {
> + if (misc_stat & MSGF_MISC_SR_RXMSG_AVAIL) {
> + u32 msg_type = nwl_bridge_readl(pcie,
> + MSGF_RX_FIFO_TYPE) &
> + MSGF_RX_FIFO_TYPE_TYPE;
> +
> + if (msg_type == MSGF_RX_FIFO_TYPE_MSI) {
> + u32 irq_msi;
> + struct nwl_msi *msi = &pcie->msi;
> + u32 msi_data = nwl_bridge_readl(pcie,
> + MSGF_RX_FIFO_DATA);
> + /* Let all ready be completed before write */
> + rmb();
> + /* POP the FIFO */
> + nwl_bridge_writel(pcie, MSGF_RX_FIFO_POP_POP,
> + MSGF_RX_FIFO_POP);
> +
> + /* Handle the msi virtual interrupt */
> + irq_msi = irq_find_mapping(msi->domain,
> + msi_data);
> +
> + if (irq_msi) {
> + if (test_bit(msi_data, msi->used))
> + generic_handle_irq(irq_msi);
> + else
> + dev_info(pcie->dev,
> + "unhandled MSI %d\n",
> + irq_msi);

No way. This implements a chained irqchip, not a normal IRQ handler. You can't just reenter the core code like this.

Please convert this to a full chained irqchip.

> + } else {
> + dev_info(pcie->dev, "unexpected MSI\n");
> + }
> + }
> + }
> + }
> + /* Clear misc interrupt status */
> + nwl_bridge_writel(pcie, misc_stat, MSGF_MISC_STATUS);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t nwl_pcie_leg_handler(int irq, void *data) {
> + struct nwl_pcie *pcie = (struct nwl_pcie *)data;
> + u32 leg_stat;
> +
> + /* Checking for legacy interrupts */
> + leg_stat = nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
> + MSGF_LEG_SR_MASKALL;
> + if (!leg_stat)
> + return IRQ_NONE;
> +
> + if (leg_stat & MSGF_LEG_SR_INTA)
> + dev_dbg(pcie->dev, "legacy interruptA\n");
> +
> + if (leg_stat & MSGF_LEG_SR_INTB)
> + dev_dbg(pcie->dev, "legacy interruptB\n");
> +
> + if (leg_stat & MSGF_LEG_SR_INTC)
> + dev_dbg(pcie->dev, "legacy interruptC\n");
> +
> + if (leg_stat & MSGF_LEG_SR_INTD)
> + dev_dbg(pcie->dev, "legacy interruptD\n");
> +
> + return IRQ_HANDLED;

And that's it? How useful is that? How do you make sure the line has been lowered (if I remember well, legacy interrupts are LEVEL).

> +}
> +
> +static void __nwl_pcie_msi_handler(struct nwl_pcie *pcie,
> + unsigned long reg, u32 val)
> +{
> + struct nwl_msi *msi = &pcie->msi;
> + unsigned int offset, index;
> + int irq_msi;
> +
> + offset = find_first_bit(&reg, 32);
> + index = offset;
> +
> + /* Clear the interrupt */
> + nwl_bridge_writel(pcie, 1 << offset, val);
> +
> + /* Handle the msi virtual interrupt */
> + irq_msi = irq_find_mapping(msi->domain, index);
> + if (irq_msi) {
> + if (test_bit(index, msi->used))
> + generic_handle_irq(irq_msi);
> + else
> + dev_info(pcie->dev, "unhandled MSI\n");
> + } else {
> + dev_info(pcie->dev, "unexpected MSI\n");
> + }
> +}

I already commented on that, and on the need to using msi domains.

> +
> +static irqreturn_t nwl_pcie_msi_handler(int irq, void *data) {
> + struct nwl_pcie *pcie = data;
> + unsigned long reg;
> + int processed = 0;
> +
> + reg = nwl_bridge_readl(pcie, MSGF_MSI_STATUS_LO);
> + if (reg) {
> + __nwl_pcie_msi_handler(pcie, reg, MSGF_MSI_STATUS_LO);
> + processed++;
> + }
> +
> + reg = nwl_bridge_readl(pcie, MSGF_MSI_STATUS_HI);
> + if (reg) {
> + __nwl_pcie_msi_handler(pcie, reg, MSGF_MSI_STATUS_HI);
> + processed++;
> + }
> +
> + return processed > 0 ? IRQ_HANDLED : IRQ_NONE; }

I think you really need to document what all these handlers are...

> +
> +static int nwl_msi_alloc(struct nwl_msi *chip) {
> + int msi;
> +
> + mutex_lock(&chip->lock);
> +
> + msi = find_first_zero_bit(chip->used, INT_PCI_MSI_NR);
> + if (msi < INT_PCI_MSI_NR)
> + set_bit(msi, chip->used);
> + else
> + msi = -ENOSPC;
> +
> + mutex_unlock(&chip->lock);
> +
> + return msi;
> +}
> +
> +static void nwl_msi_free(struct nwl_msi *chip, unsigned long irq) {
> + struct device *dev = chip->chip.dev;
> +
> + mutex_lock(&chip->lock);
> +
> + if (!test_bit(irq, chip->used))
> + dev_err(dev, "trying to free unused MSI#%lu\n", irq);
> + else
> + clear_bit(irq, chip->used);
> +
> + mutex_unlock(&chip->lock);
> +}
> +
> +static int nwl_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev,
> + struct msi_desc *desc)
> +{
> + struct nwl_msi *msi = to_nwl_msi(chip);
> + struct msi_msg msg;
> + unsigned int irq;
> + int hwirq;
> +
> + /* currently we are not supporting MSIx */
> + if (desc->msi_attrib.is_msix)
> + return -ENOSPC;
> +
> + hwirq = nwl_msi_alloc(msi);
> + if (hwirq < 0)
> + return hwirq;
> +
> + irq = irq_create_mapping(msi->domain, hwirq);
> + if (!irq)
> + return -EINVAL;
> +
> + irq_set_msi_desc(irq, desc);
> +
> + msg.address_lo = virt_to_phys((void *)msi->pages);
> + /* 32 bit address only */
> + msg.address_hi = 0;
> + msg.data = hwirq;
> +
> + write_msi_msg(irq, &msg);
> +
> + return 0;
> +}
> +
> +static void nwl_msi_teardown_irq(struct msi_controller *chip,
> +unsigned int irq) {
> + struct nwl_msi *msi = to_nwl_msi(chip);
> + struct irq_data *d = irq_get_irq_data(irq);
> +
> + nwl_msi_free(msi, d->hwirq);
> +}
> +
> +static struct irq_chip nwl_msi_irq_chip = {
> + .name = "nwl_pcie:msi",
> + .irq_enable = unmask_msi_irq,
> + .irq_disable = mask_msi_irq,
> + .irq_mask = mask_msi_irq,
> + .irq_unmask = unmask_msi_irq,
> +};

All that needs to go.

> +
> +static int nwl_msi_map(struct irq_domain *domain, unsigned int irq,
> + irq_hw_number_t hwirq)
> +{
> + irq_set_chip_and_handler(irq, &nwl_msi_irq_chip, handle_simple_irq);
> + irq_set_chip_data(irq, domain->host_data);
> + set_irq_flags(irq, IRQF_VALID);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops msi_domain_ops = {
> + .map = nwl_msi_map,
> +};
> +
> +static int nwl_pcie_enable_msi(struct nwl_pcie *pcie, struct pci_bus
> +*bus) {
> + struct platform_device *pdev = to_platform_device(pcie->dev);
> + struct nwl_msi *msi = &pcie->msi;
> + unsigned long base;
> + int ret;
> +
> + mutex_init(&msi->lock);
> +
> + /* Assign msi chip hooks */
> + msi->chip.dev = pcie->dev;
> + msi->chip.setup_irq = nwl_msi_setup_irq;
> + msi->chip.teardown_irq = nwl_msi_teardown_irq;
> +
> + bus->msi = &msi->chip;
> + msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
> + &msi_domain_ops, &msi->chip);
> + if (!msi->domain) {
> + dev_err(&pdev->dev, "failed to create IRQ domain\n");
> + return -ENOMEM;
> + }
> +
> + /* Check for msii_present bit */
> + ret = nwl_bridge_readl(pcie, I_MSII_CAPABILITIES) & MSII_PRESENT;
> + if (!ret) {
> + dev_err(pcie->dev, "MSI not present\n");
> + ret = -EIO;
> + goto err;
> + }
> +
> + /* Enable MSII */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
> + MSII_ENABLE, I_MSII_CONTROL);
> + if (!pcie->enable_msi_fifo)
> + /* Enable MSII status */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
> + MSII_STATUS_ENABLE, I_MSII_CONTROL);
> +
> + /* setup AFI/FPCI range */
> + msi->pages = __get_free_pages(GFP_KERNEL, 0);
> + base = virt_to_phys((void *)msi->pages);
> + nwl_bridge_writel(pcie, base, I_MSII_BASE_LO);
> + nwl_bridge_writel(pcie, 0x0, I_MSII_BASE_HI);
> +
> + /* Disable high range msi interrupts */
> + nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_HI_MASK,
> +MSGF_MSI_MASK_HI);
> +
> + /* Clear pending high range msi interrupts */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MSI_STATUS_HI) &
> + MSGF_MSI_SR_HI_MASK, MSGF_MSI_STATUS_HI);
> + /* Get msi_1 IRQ number */
> + msi->irq_msi1 = platform_get_irq_byname(pdev, "msi_1");
> + if (msi->irq_msi1 < 0) {
> + dev_err(&pdev->dev, "failed to get IRQ#%d\n", msi->irq_msi1);
> + goto err;
> + }
> + /* Register msi handler */
> + ret = devm_request_irq(pcie->dev, msi->irq_msi1, nwl_pcie_msi_handler,
> + 0, nwl_msi_irq_chip.name, pcie);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to request IRQ#%d\n",
> + msi->irq_msi1);
> + goto err;
> + }
> +
> + /* Enable all high range msi interrupts */
> + nwl_bridge_writel(pcie, MSGF_MSI_SR_HI_MASK, MSGF_MSI_MASK_HI);
> +
> + /* Disable low range msi interrupts */
> + nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_LO_MASK,
> +MSGF_MSI_MASK_LO);
> +
> + /* Clear pending low range msi interrupts */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MSI_STATUS_LO) &
> + MSGF_MSI_SR_LO_MASK, MSGF_MSI_STATUS_LO);
> + /* Get msi_0 IRQ number */
> + msi->irq_msi0 = platform_get_irq_byname(pdev, "msi_0");
> + if (msi->irq_msi0 < 0) {
> + dev_err(&pdev->dev, "failed to get IRQ#%d\n", msi->irq_msi0);
> + goto err;
> + }
> + /* Register msi handler */
> + ret = devm_request_irq(pcie->dev, msi->irq_msi0, nwl_pcie_msi_handler,
> + 0, nwl_msi_irq_chip.name, pcie);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to request IRQ#%d\n",
> + msi->irq_msi0);
> + goto err;
> + }
> + /* Enable all low range msi interrupts */
> + nwl_bridge_writel(pcie, MSGF_MSI_SR_LO_MASK, MSGF_MSI_MASK_LO);
> +
> + return 0;
> +err:
> + irq_domain_remove(msi->domain);
> + return ret;
> +}
> +
> +static int nwl_pcie_bridge_init(struct nwl_pcie *pcie) {
> + struct platform_device *pdev = to_platform_device(pcie->dev);
> + u32 breg_val, ecam_val, first_busno = 0;
> + int err;
> + int check_link_up = 0;
> +
> + /* Check for BREG present bit */
> + breg_val = nwl_bridge_readl(pcie, E_BREG_CAPABILITIES) & BREG_PRESENT;
> + if (!breg_val) {
> + dev_err(pcie->dev, "BREG is not present\n");
> + return breg_val;
> + }
> + /* Write bridge_off to breg base */
> + nwl_bridge_writel(pcie, (u32)(pcie->phys_breg_base),
> + E_BREG_BASE_LO);
> +
> + /* Enable BREG */
> + nwl_bridge_writel(pcie, ~BREG_ENABLE_FORCE & BREG_ENABLE,
> + E_BREG_CONTROL);
> +
> + /* Disable DMA channel registers */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_PCIE_RX0) |
> + CFG_DMA_REG_BAR, BRCFG_PCIE_RX0);
> +
> + /* Enable the bridge config interrupt */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_INTERRUPT) |
> + BRCFG_INTERRUPT_MASK, BRCFG_INTERRUPT);
> + /* Enable Ingress subtractive decode translation */
> + nwl_bridge_writel(pcie, SET_ISUB_CONTROL, I_ISUB_CONTROL);
> +
> + /* Enable msg filtering details */
> + nwl_bridge_writel(pcie, CFG_ENABLE_MSG_FILTER_MASK,
> + BRCFG_PCIE_RX_MSG_FILTER);
> + do {
> + err = nwl_pcie_link_up(pcie, PHY_RDY_LINKUP);
> + if (err != 1) {
> + check_link_up++;
> + if (check_link_up > LINKUP_ITER_CHECK)
> + return -ENODEV;
> + mdelay(1000);
> + }
> + } while (!err);
> +
> + /* Check for ECAM present bit */
> + ecam_val = nwl_bridge_readl(pcie, E_ECAM_CAPABILITIES) & E_ECAM_PRESENT;
> + if (!ecam_val) {
> + dev_err(pcie->dev, "ECAM is not present\n");
> + return ecam_val;
> + }
> +
> + /* Enable ECAM */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
> + E_ECAM_CR_ENABLE, E_ECAM_CONTROL);
> + /* Write ecam_value on ecam_control */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
> + (pcie->ecam_value << E_ECAM_SIZE_SHIFT),
> + E_ECAM_CONTROL);
> + /* Write phy_reg_base to ecam base */
> + nwl_bridge_writel(pcie, (u32)pcie->phys_ecam_base, E_ECAM_BASE_LO);
> +
> + /* Get bus range */
> + ecam_val = nwl_bridge_readl(pcie, E_ECAM_CONTROL);
> + pcie->last_busno = (ecam_val & E_ECAM_SIZE_LOC) >> E_ECAM_SIZE_SHIFT;
> + /* Write primary, secondary and subordinate bus numbers */
> + ecam_val = first_busno;
> + ecam_val |= (first_busno + 1) << 8;
> + ecam_val |= (pcie->last_busno << E_ECAM_SIZE_SHIFT);
> + writel(ecam_val, (pcie->ecam_base + PCI_PRIMARY_BUS));
> +
> + /* Check if PCIe link is up? */
> + pcie->link_up = nwl_pcie_link_up(pcie, PCIE_USER_LINKUP);
> + if (!pcie->link_up)
> + dev_info(pcie->dev, "Link is DOWN\n");
> + else
> + dev_info(pcie->dev, "Link is UP\n");
> +
> + /* Disable all misc interrupts */
> + nwl_bridge_writel(pcie, (u32)~MSGF_MISC_SR_MASKALL, MSGF_MISC_MASK);
> +
> + /* Clear pending misc interrupts */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MISC_STATUS) &
> + MSGF_MISC_SR_MASKALL, MSGF_MISC_STATUS);
> +
> + /* Get misc IRQ number */
> + pcie->irq_misc = platform_get_irq_byname(pdev, "misc");
> + if (pcie->irq_misc < 0) {
> + dev_err(&pdev->dev, "failed to get misc IRQ#%d\n",
> + pcie->irq_misc);
> + return pcie->irq_misc;
> + }
> + /* Register misc handler */
> + err = devm_request_irq(pcie->dev, pcie->irq_misc,
> + nwl_pcie_misc_handler, IRQF_SHARED,
> + "nwl_pcie:misc", pcie);
> + if (err) {
> + dev_err(pcie->dev, "fail to register misc IRQ#%d\n",
> + pcie->irq_misc);
> + return err;
> + }
> + /* Enable all misc interrupts */
> + nwl_bridge_writel(pcie, MSGF_MISC_SR_MASKALL, MSGF_MISC_MASK);
> +
> + /* Disable all legacy interrupts */
> + nwl_bridge_writel(pcie, (u32)~MSGF_LEG_SR_MASKALL, MSGF_LEG_MASK);
> +
> + /* Clear pending legacy interrupts */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
> + MSGF_LEG_SR_MASKALL, MSGF_LEG_STATUS);
> + /* Get intx IRQ number */
> + pcie->irq_intx = platform_get_irq_byname(pdev, "intx");
> + if (pcie->irq_intx < 0) {
> + dev_err(&pdev->dev, "failed to get intx IRQ#%d\n",
> + pcie->irq_intx);
> + return pcie->irq_intx;
> + }
> +
> + /* Register intx handler */
> + err = devm_request_irq(pcie->dev, pcie->irq_intx,
> + nwl_pcie_leg_handler, IRQF_SHARED,
> + "nwl_pcie:intx", pcie);
> + if (err) {
> + dev_err(pcie->dev, "fail to register intx IRQ#%d\n",
> + pcie->irq_intx);
> + return err;
> + }
> + /* Enable all legacy interrupts */
> + nwl_bridge_writel(pcie, MSGF_LEG_SR_MASKALL, MSGF_LEG_MASK);
> +
> + return 0;
> +}
> +
> +static int nwl_pcie_parse_dt(struct nwl_pcie *pcie,
> + struct platform_device *pdev)
> +{
> + struct device_node *node = pcie->dev->of_node;
> + struct resource *res;
> + const char *type;
> +
> + /* Check for device type */
> + type = of_get_property(node, "device_type", NULL);
> + if (!type || strcmp(type, "pci")) {
> + dev_err(pcie->dev, "invalid \"device_type\" %s\n", type);
> + return -EINVAL;
> + }

How can this fail?

> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "breg");
> + pcie->breg_base = devm_ioremap_resource(pcie->dev, res);
> + if (IS_ERR(pcie->breg_base))
> + return PTR_ERR(pcie->breg_base);
> + pcie->phys_breg_base = res->start;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcireg");
> + pcie->pcireg_base = devm_ioremap_resource(pcie->dev, res);
> + if (IS_ERR(pcie->pcireg_base))
> + return PTR_ERR(pcie->pcireg_base);
> + pcie->phys_pcie_reg_base = res->start;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
> + pcie->ecam_base = devm_ioremap_resource(pcie->dev, res);
> + if (IS_ERR(pcie->ecam_base))
> + return PTR_ERR(pcie->ecam_base);
> + pcie->phys_ecam_base = res->start;
> +
> + pcie->enable_msi_fifo = of_property_read_bool(node,
> +"xlnx,msi-fifo");
> +
> + return 0;
> +}
> +
> +static const struct of_device_id nwl_pcie_of_match[] = {
> + { .compatible = "xlnx,nwl-pcie-2.11", },
> + {}
> +};
> +
> +static int nwl_pcie_probe(struct platform_device *pdev) {
> + struct device_node *node = pdev->dev.of_node;
> + struct nwl_pcie *pcie;
> + struct pci_bus *bus;
> + int err;
> +
> + resource_size_t iobase = 0;
> + LIST_HEAD(res);
> +
> + pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
> + if (!pcie)
> + return -ENOMEM;
> +
> + pcie->ecam_value = NWL_ECAM_VALUE_DEFAULT;
> +
> + pcie->dev = &pdev->dev;
> +
> + err = nwl_pcie_parse_dt(pcie, pdev);
> + if (err) {
> + dev_err(pcie->dev, "Parsing DT failed\n");
> + return err;
> + }
> + /* Bridge initialization */
> + err = nwl_pcie_bridge_init(pcie);
> + if (err) {
> + dev_err(pcie->dev, "HW Initalization failed\n");
> + return err;
> + }
> +
> + err = of_pci_get_host_bridge_resources(node, 0, 0xff, &res, &iobase);
> + if (err) {
> + pr_err("Getting bridge resources failed\n");
> + return err;
> + }
> + bus = pci_create_root_bus(&pdev->dev, 0,
> + &nwl_pcie_ops, pcie, &res);
> + if (!bus)
> + return -ENOMEM;
> +
> + /* Enable MSI */
> + if (IS_ENABLED(CONFIG_PCI_MSI)) {
> + err = nwl_pcie_enable_msi(pcie, bus);
> + if (err < 0) {
> + dev_err(&pdev->dev,
> + "failed to enable MSI support: %d\n",
> + err);
> + return err;
> + }
> + }
> + pci_scan_child_bus(bus);
> + pci_assign_unassigned_bus_resources(bus);
> + pci_bus_add_devices(bus);
> + platform_set_drvdata(pdev, pcie);
> +
> + return 0;
> +}
> +
> +static int nwl_pcie_remove(struct platform_device *pdev) {
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static struct platform_driver nwl_pcie_driver = {
> + .driver = {
> + .name = "nwl-pcie",
> + .of_match_table = nwl_pcie_of_match,
> + },
> + .probe = nwl_pcie_probe,
> + .remove = nwl_pcie_remove,
> +};
> +module_platform_driver(nwl_pcie_driver);
> +
> +MODULE_AUTHOR("Xilinx, Inc");
> +MODULE_DESCRIPTION("NWL PCIe driver"); MODULE_LICENSE("GPL");
> --
> 1.7.1

Overall, I think it would make sense to split the PCIe controller driver and the MSI controller (in separate files as well).

Please keep me posted on the updates.

Thanks,

M.
--
Jazz is not dead. It just smells funny...

We will address other comments in the next patch.
Bharat
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/