[PATCH v2 4/4] spi: spi-coldfire-qspi: enable RuntimePM before registering to the core

[Wolfram Sang]

From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>

The core may register clients attached to this master which may use
funtionality from the master. So, RuntimePM must be enabled before, otherwise
this will fail.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/spi/spi-coldfire-qspi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c
index 688956ff5095c2..23f6fffd75e111 100644
--- a/drivers/spi/spi-coldfire-qspi.c
+++ b/drivers/spi/spi-coldfire-qspi.c
@@ -420,19 +420,20 @@ static int mcfqspi_probe(struct platform_device *pdev)
 	master->auto_runtime_pm = true;
 
 	platform_set_drvdata(pdev, master);
+	pm_runtime_enable(&pdev->dev);
 
 	status = devm_spi_register_master(&pdev->dev, master);
 	if (status) {
 		dev_dbg(&pdev->dev, "spi_register_master failed\n");
 		goto fail2;
 	}
-	pm_runtime_enable(&pdev->dev);
 
 	dev_info(&pdev->dev, "Coldfire QSPI bus driver\n");
 
 	return 0;
 
 fail2:
+	pm_runtime_disable(&pdev->dev);
 	mcfqspi_cs_teardown(mcfqspi);
 fail1:
 	clk_disable(mcfqspi->clk);
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/