Re: [PATCH 1/3] iio:adc: add iio driver for Palmas (twl6035/7) gpadc

[Jonathan Cameron]

On 04/10/15 17:04, H. Nikolaus Schaller wrote:
> 
> Am 27.09.2015 um 17:21 schrieb Jonathan Cameron <jic23@xxxxxxxxxx>:
> 
>> On 23/09/15 13:48, H. Nikolaus Schaller wrote:
>>> This driver code was found as:
>>>
>>> https://android.googlesource.com/kernel/tegra/+/aaabb2e045f31e5a970109ffdaae900dd403d17e/drivers/staging/iio/adc
>>>
>>> Fixed various compilation issues and test this driver on omap5 evm.
>>>
>>> Signed-off-by: Pradeep Goudagunta <pgoudagunta@xxxxxxxxxx>
>>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>>> Signed-off-by: Marek Belisko <marek@xxxxxxxxxxxxx>
>> Various bits inline.
> 
> Thanks again!
> 
> Worked into V2 (coming right after this mail).
> Comments below, where/why we have not exactly followed your feedback.
Responses inline, but we haven't disagreed on anything important
so none of it really matters!

Jonathan
> 
> BR,
> Nikolaus
> 
>>
>> Jonathan
>>> ---
>>> drivers/iio/adc/Kconfig        |   9 +
>>> drivers/iio/adc/Makefile       |   1 +
>>> drivers/iio/adc/palmas_gpadc.c | 797 +++++++++++++++++++++++++++++++++++++++++
>>> include/linux/mfd/palmas.h     |  59 ++-
>>> 4 files changed, 862 insertions(+), 4 deletions(-)
>>> create mode 100644 drivers/iio/adc/palmas_gpadc.c
>>>
>>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>>> index eb0cd89..f6df9db 100644
>>> --- a/drivers/iio/adc/Kconfig
>>> +++ b/drivers/iio/adc/Kconfig
>>> @@ -242,6 +242,15 @@ config NAU7802
>>> 	  To compile this driver as a module, choose M here: the
>>> 	  module will be called nau7802.
>>>
>>> +config PALMAS_GPADC
>>> +	tristate "TI Palmas General Purpose ADC"
>>> +	depends on MFD_PALMAS
>>> +	help
>>> +	  Palmas series pmic chip by texas Instruments (twl6035/6037)
>>> +	  is used in smartphones and tablets and supports a 16 channel
>>> +	  general purpose ADC. Add iio driver to read different channel
>>> +	  of the GPADCs.
>>> +
>>> config QCOM_SPMI_IADC
>>> 	tristate "Qualcomm SPMI PMIC current ADC"
>>> 	depends on SPMI
>>> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
>>> index a096210..716f112 100644
>>> --- a/drivers/iio/adc/Makefile
>>> +++ b/drivers/iio/adc/Makefile
>>> @@ -26,6 +26,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o
>>> obj-$(CONFIG_MCP3422) += mcp3422.o
>>> obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
>>> obj-$(CONFIG_NAU7802) += nau7802.o
>>> +obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
>>> obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
>>> obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
>>> obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
>>> diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
>>> new file mode 100644
>>> index 0000000..17abb28
>>> --- /dev/null
>>> +++ b/drivers/iio/adc/palmas_gpadc.c
>>> @@ -0,0 +1,797 @@
>>> +/*
>>> + * palmas-adc.c -- TI PALMAS GPADC.
>>> + *
>>> + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
>>> + *
>>> + * Author: Pradeep Goudagunta <pgoudagunta@xxxxxxxxxx>
>>> + *
>>> + * This program is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation version 2.
>>> + */
>>> +#include <linux/module.h>
>>> +#include <linux/err.h>
>>> +#include <linux/irq.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/i2c.h>
>>> +#include <linux/pm.h>
>>> +#include <linux/mfd/palmas.h>
>>> +#include <linux/completion.h>
>>> +#include <linux/iio/iio.h>
>>> +#include <linux/iio/machine.h>
>>> +#include <linux/iio/driver.h>
>>> +
>>> +#define MOD_NAME "palmas-gpadc"
>>> +#define ADC_CONVERSION_TIMEOUT	(msecs_to_jiffies(5000))
>>> +#define TO_BE_CALCULATED 0
>>> +
>>> +struct palmas_gpadc_info {
>>> +/* calibration codes and regs */
>> Full docs on this would be appreciated.
> Is mostly defined in the Palmas data sheet but I have added some comments.
>>> +	int x1;
>>> +	int x2;
>>> +	int v1;
>>> +	int v2;
>>> +	u8 trim1_reg;
>>> +	u8 trim2_reg;
>>> +	int gain;
>>> +	int offset;
>>> +	int gain_error;
>>> +	bool is_correct_code;
>>> +};
>>> +
>>> +#define PALMAS_ADC_INFO(_chan, _x1, _x2, _v1, _v2, _t1, _t2, _is_correct_code)\
>>> +[PALMAS_ADC_CH_##_chan] = {						\
>>> +		.x1 = _x1,						\
>>> +		.x2 = _x2,						\
>>> +		.v1 = _v1,						\
>>> +		.v2 = _v2,						\
>>> +		.gain = TO_BE_CALCULATED,				\
>>> +		.offset = TO_BE_CALCULATED,				\
>>> +		.gain_error = TO_BE_CALCULATED,				\
>>> +		.trim1_reg = PALMAS_GPADC_TRIM##_t1,			\
>>> +		.trim2_reg = PALMAS_GPADC_TRIM##_t2,			\
>>> +		.is_correct_code = _is_correct_code			\
>>> +	}
>>> +
>>> +static struct palmas_gpadc_info palmas_gpadc_info[] = {
>>> +	PALMAS_ADC_INFO(IN0, 2064, 3112, 630, 950, 1, 2, false),
>>> +	PALMAS_ADC_INFO(IN1, 2064, 3112, 630, 950, 1, 2, false),
>>> +	PALMAS_ADC_INFO(IN2, 2064, 3112, 1260, 1900, 3, 4, false),
>>> +	PALMAS_ADC_INFO(IN3, 2064, 3112, 630, 950, 1, 2, false),
>>> +	PALMAS_ADC_INFO(IN4, 2064, 3112, 630, 950, 1, 2, false),
>>> +	PALMAS_ADC_INFO(IN5, 2064, 3112, 630, 950, 1, 2, false),
>>> +	PALMAS_ADC_INFO(IN6, 2064, 3112, 2520, 3800, 5, 6, false),
>>> +	PALMAS_ADC_INFO(IN7, 2064, 3112, 2520, 3800, 7, 8, false),
>>> +	PALMAS_ADC_INFO(IN8, 2064, 3112, 3150, 4750, 9, 10, false),
>>> +	PALMAS_ADC_INFO(IN9, 2064, 3112, 5670, 8550, 11, 12, false),
>>> +	PALMAS_ADC_INFO(IN10, 2064, 3112, 3465, 5225, 13, 14, false),
>>> +	PALMAS_ADC_INFO(IN11, 0, 0, 0, 0, INVALID, INVALID, true),
>>> +	PALMAS_ADC_INFO(IN12, 0, 0, 0, 0, INVALID, INVALID, true),
>>> +	PALMAS_ADC_INFO(IN13, 0, 0, 0, 0, INVALID, INVALID, true),
>>> +	PALMAS_ADC_INFO(IN14, 2064, 3112, 3645, 5225, 15, 16, false),
>>> +	PALMAS_ADC_INFO(IN15, 0, 0, 0, 0, INVALID, INVALID, true),
>>> +};
>>> +
>>> +struct palmas_gpadc {
>>> +	struct device			*dev;
>>> +	struct palmas			*palmas;
>> As there are some non obvious elements in here (such as the next two)
>> kernel-doc for the whole stucture would be good.
> 
> I don't know what all of them are doing, so I have only added the next two and some more.
> 
>>
>>> +	u8				ch0_current;
>>> +	u8				ch3_current;
> 
> If I understand them correctly, they just store 2 bits each written into the
> current source registers. The value is only calculated in the probe function
> and internal to the driver. The bit pattern required is defined by the data sheet.
> 
> All TWL4030/TWL603x have such current sources. In the DT, just uA are specified
> and this is to temporarily store the bit pattern until it is sent to the chip. So it is quite
> a deep driver internal, but should be obvious to everyone who has the data sheet.
> 
>>> +	bool				extended_delay;
>>> +	int				irq;
>>> +	int				irq_auto_0;
>>> +	int				irq_auto_1;
>>> +	struct palmas_gpadc_info	*adc_info;
>>> +	struct completion		conv_completion;
>>> +	struct palmas_adc_wakeup_property wakeup1_data;
>>> +	struct palmas_adc_wakeup_property wakeup2_data;
>>> +	bool				wakeup1_enable;
>>> +	bool				wakeup2_enable;
>>> +	int				auto_conversion_period;
>>> +};
>>> +
>>> +/*
>>> + * GPADC lock issue in AUTO mode.
>>> + * Impact: In AUTO mode, GPADC conversion can be locked after disabling AUTO
>>> + *	   mode feature.
>>> + * Details:
>>> + *	When the AUTO mode is the only conversion mode enabled, if the AUTO
>>> + *	mode feature is disabled with bit GPADC_AUTO_CTRL.  AUTO_CONV1_EN = 0
>>> + *	or bit GPADC_AUTO_CTRL.  AUTO_CONV0_EN = 0 during a conversion, the
>>> + *	conversion mechanism can be seen as locked meaning that all following
>>> + *	conversion will give 0 as a result.  Bit GPADC_STATUS.GPADC_AVAILABLE
>>> + *	will stay at 0 meaning that GPADC is busy.  An RT conversion can unlock
>>> + *	the GPADC.
>>> + *
>>> + * Workaround(s):
>>> + *	To avoid the lock mechanism, the workaround to follow before any stop
>>> + *	conversion request is:
>>> + *	Force the GPADC state machine to be ON by using the GPADC_CTRL1.
>>> + *		GPADC_FORCE bit = 1
>>> + *	Shutdown the GPADC AUTO conversion using
>>> + *		GPADC_AUTO_CTRL.SHUTDOWN_CONV[01] = 0.
>>> + *	After 100us, force the GPADC state machine to be OFF by using the
>>> + *		GPADC_CTRL1.  GPADC_FORCE bit = 0
>>> + */
>>> +static int palmas_disable_auto_conversion(struct palmas_gpadc *adc)
>>> +{
>>> +	int ret;
>>> +
>>> +	ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>>> +			PALMAS_GPADC_CTRL1,
>>> +			PALMAS_GPADC_CTRL1_GPADC_FORCE,
>>> +			PALMAS_GPADC_CTRL1_GPADC_FORCE);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "GPADC_CTRL1 update failed: %d\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>>> +			PALMAS_GPADC_AUTO_CTRL,
>>> +			PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1 |
>>> +			PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0,
>>> +			0);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "AUTO_CTRL update failed: %d\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	udelay(100);
>>> +
>>> +	ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>>> +			PALMAS_GPADC_CTRL1,
>>> +			PALMAS_GPADC_CTRL1_GPADC_FORCE, 0);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "GPADC_CTRL1 update failed: %d\n", ret);
>>> +		return ret;
>>> +	}
>> return ret and drop the return above.  Coccicheck will moan at you about
>> this.
>>> +	return 0;
>>> +}
>>> +
>>> +static irqreturn_t palmas_gpadc_irq(int irq, void *data)
>>> +{
>>> +	struct palmas_gpadc *adc = data;
>>> +
>>> +	complete(&adc->conv_completion);
>> blank line.
>>> +	return IRQ_HANDLED;
>>> +}
>>> +
>>> +static irqreturn_t palmas_gpadc_irq_auto(int irq, void *data)
>>> +{
>>> +	struct palmas_gpadc *adc = data;
>>> +
>>> +	dev_info(adc->dev, "Threshold interrupt %d occurs\n", irq);
>> Could indicate this to userspace... other than through the logs.
> 
> Since I am not the original author and don't know how to present that to user space,
> I would leave this open for future improvements.

Fair enough.

> 
>>
>>> +	palmas_disable_auto_conversion(adc);
>> blank line generally before all function returns..
>>> +	return IRQ_HANDLED;
>>> +}
>>> +
>>> +static int palmas_gpadc_start_mask_interrupt(struct palmas_gpadc *adc, int mask)
>>
>> mask is boolean.  Make it explicitly so for readability.
>>
>>> +{
>>> +	int ret;
>>> +
>>> +	if (!mask)
>>> +		ret = palmas_update_bits(adc->palmas, PALMAS_INTERRUPT_BASE,
>>> +					PALMAS_INT3_MASK,
>>> +					PALMAS_INT3_MASK_GPADC_EOC_SW, 0);
>>> +	else
>>> +		ret = palmas_update_bits(adc->palmas, PALMAS_INTERRUPT_BASE,
>>> +					PALMAS_INT3_MASK,
>>> +					PALMAS_INT3_MASK_GPADC_EOC_SW,
>>> +					PALMAS_INT3_MASK_GPADC_EOC_SW);
>>> +	if (ret < 0)
>>> +		dev_err(adc->dev, "GPADC INT MASK update failed: %d\n", ret);
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +static int palmas_gpadc_enable(struct palmas_gpadc *adc, int adc_chan,
>>> +			       int enable)
>>> +{
>>> +	unsigned int mask, val;
>>> +	int ret;
>>> +
>>> +	if (enable) {
>>> +		val = (adc->extended_delay
>>> +			<< PALMAS_GPADC_RT_CTRL_EXTEND_DELAY_SHIFT);
>>> +		ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>>> +					PALMAS_GPADC_RT_CTRL,
>>> +					PALMAS_GPADC_RT_CTRL_EXTEND_DELAY, val);
>>> +		if (ret < 0) {
>>> +			dev_err(adc->dev, "RT_CTRL update failed: %d\n", ret);
>>> +			return ret;
>>> +		}
>>> +
>>> +		mask = (PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_MASK |
>>> +			PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_MASK |
>>> +			PALMAS_GPADC_CTRL1_GPADC_FORCE);
>>> +		val = (adc->ch0_current
>>> +			<< PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_SHIFT);
>>> +		val |= (adc->ch3_current
>>> +			<< PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_SHIFT);
>>> +		val |= PALMAS_GPADC_CTRL1_GPADC_FORCE;
>>> +		ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>>> +				PALMAS_GPADC_CTRL1, mask, val);
>>> +		if (ret < 0) {
>>> +			dev_err(adc->dev,
>>> +				"Failed to update current setting: %d\n", ret);
>>> +			return ret;
>>> +		}
>>> +
>>> +		mask = (PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_MASK |
>>> +			PALMAS_GPADC_SW_SELECT_SW_CONV_EN);
>>> +		val = (adc_chan | PALMAS_GPADC_SW_SELECT_SW_CONV_EN);
>>> +		ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>>> +				PALMAS_GPADC_SW_SELECT, mask, val);
>>> +		if (ret < 0) {
>>> +			dev_err(adc->dev, "SW_SELECT update failed: %d\n", ret);
>>> +			return ret;
>>> +		}
>>> +	} else {
>>> +		ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>>> +				PALMAS_GPADC_SW_SELECT, 0);
>>> +		if (ret < 0)
>>> +			dev_err(adc->dev, "SW_SELECT write failed: %d\n", ret);
>>> +
>>> +		ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>>> +				PALMAS_GPADC_CTRL1,
>>> +				PALMAS_GPADC_CTRL1_GPADC_FORCE, 0);
>>> +		if (ret < 0) {
>>> +			dev_err(adc->dev, "CTRL1 update failed: %d\n", ret);
>>> +			return ret;
>>> +		}
>>> +	}
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +static int palmas_gpadc_read_prepare(struct palmas_gpadc *adc, int adc_chan)
>>> +{
>>> +	int ret;
>>> +
>>> +	ret = palmas_gpadc_enable(adc, adc_chan, true);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	return palmas_gpadc_start_mask_interrupt(adc, 0);
>>> +}
>>> +
>>> +static void palmas_gpadc_read_done(struct palmas_gpadc *adc, int adc_chan)
>>> +{
>>> +	palmas_gpadc_start_mask_interrupt(adc, 1);
>>> +	palmas_gpadc_enable(adc, adc_chan, false);
>>> +}
>>> +
>>> +static int palmas_gpadc_calibrate(struct palmas_gpadc *adc, int adc_chan)
>>> +{
>>> +	int k;
>>> +	int d1;
>>> +	int d2;
>>> +	int ret;
>>> +	int gain;
>>> +	int x1 =  adc->adc_info[adc_chan].x1;
>>> +	int x2 =  adc->adc_info[adc_chan].x2;
>>> +	int v1 = adc->adc_info[adc_chan].v1;
>>> +	int v2 = adc->adc_info[adc_chan].v2;
>>> +
>>> +	ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE,
>>> +				adc->adc_info[adc_chan].trim1_reg, &d1);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "TRIM read failed: %d\n", ret);
>>> +		goto scrub;
>>> +	}
>>> +
>>> +	ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE,
>>> +				adc->adc_info[adc_chan].trim2_reg, &d2);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "TRIM read failed: %d\n", ret);
>>> +		goto scrub;
>>> +	}
>>> +
>>> +	/*Gain error Calculation*/
>>> +	k = (1000 + (1000 * (d2 - d1)) / (x2 - x1));
>>> +
>>> +	/*Gain Calculation*/
>>> +	gain = ((v2 - v1) * 1000) / (x2 - x1);
>>> +
>>> +	adc->adc_info[adc_chan].gain_error = k;
>>> +	adc->adc_info[adc_chan].gain = gain;
>>> +	/*offset Calculation*/
>>> +	adc->adc_info[adc_chan].offset = (d1 * 1000) - ((k - 1000) * x1);
>>> +
>>> +scrub:
>>> +	return ret;
>>> +}
>>> +
>>> +static int palmas_gpadc_start_conversion(struct palmas_gpadc *adc, int adc_chan)
>>> +{
>>> +	unsigned int val;
>>> +	int ret;
>>> +
>>> +	init_completion(&adc->conv_completion);
>>> +	ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>>> +				PALMAS_GPADC_SW_SELECT,
>>> +				PALMAS_GPADC_SW_SELECT_SW_START_CONV0,
>>> +				PALMAS_GPADC_SW_SELECT_SW_START_CONV0);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "ADC_SW_START write failed: %d\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	ret = wait_for_completion_timeout(&adc->conv_completion,
>>> +				ADC_CONVERSION_TIMEOUT);
>>> +	if (ret == 0) {
>>> +		dev_err(adc->dev, "ADC conversion not completed\n");
>>> +		ret = -ETIMEDOUT;
>>> +		return ret;
>> return -ETIMEDOUT;   Might be worth you setting up to do sparse, smatch and
>> coccicheck runs on the code as they'll pick up on a lot of issues like this.
>>
>>> +	}
>>> +
>>> +	ret = palmas_bulk_read(adc->palmas, PALMAS_GPADC_BASE,
>>> +				PALMAS_GPADC_SW_CONV0_LSB, &val, 2);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "ADCDATA read failed: %d\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	ret = (val & 0xFFF);
>> nitpick : blank line here.
>>> +	return ret;
>>> +}
>>> +
>>> +static int palmas_gpadc_get_calibrated_code(struct palmas_gpadc *adc,
>>> +						int adc_chan, int val)
>>> +{
>>> +	if (((val*1000) - adc->adc_info[adc_chan].offset) < 0) {
>>> +		dev_err(adc->dev, "No Input Connected\n");
>>> +		return 0;
>>> +	}
>> Interesting, but should this not be caught for raw channel reads as well?
> 
> It appears that this function is only called for calibrated values.
> 
> The condition appears to detect that the ADC has reported a value smaller than
> the calibration allows.
> 
> This indicates to be some error condition (maybe a floating ADC input?). But
> I don't know enough of the Palmas details to judge this. So I have only moved
> it behind the (optional) calibration calculation and detect if either would report
> negative values. So it essentially clamps voltage reports at 0V.
> 
>>> +
>> Umm. what is is_correct_code? Should be documented somewhere
> 
> have renamed it to is_uncalibrated which means that there is no register
> on the chip to read out calibration data for that channel.
> 
>>> +	if (!(adc->adc_info[adc_chan].is_correct_code))
>>> +		val  = ((val*1000) - adc->adc_info[adc_chan].offset) /
>>> +					adc->adc_info[adc_chan].gain_error;
>>> +
>>> +	val = (val * adc->adc_info[adc_chan].gain) / 1000;
>>> +	return val;
>>> +}
>>> +
>>> +static int palmas_gpadc_read_raw(struct iio_dev *indio_dev,
>>> +	struct iio_chan_spec const *chan, int *val, int *val2, long mask)
>>> +{
>>> +	struct  palmas_gpadc *adc = iio_priv(indio_dev);
>>> +	int adc_chan = chan->channel;
>>> +	int ret = 0;
>>> +
>>> +	if (adc_chan > PALMAS_ADC_CH_MAX)
>>> = given I think your channels are 0 indexed?
>>> +		return -EINVAL;
>>> +
>>> +	mutex_lock(&indio_dev->mlock);
>>> +
>>> +	switch (mask) {
>>> +	case IIO_CHAN_INFO_RAW:
>>> +	case IIO_CHAN_INFO_PROCESSED:
>> I'd be tempted to split the two code paths here as that will be slightly
>> easier to read (if longer).
> 
> IMHO would duplicate code (not sure if gcc can detect). Therefore I have left it as is.
> 
>>
>> I'm also highly suspicious of any driver that does processed output
>> and has a return type of IIO_VAL_INT.  Are you processed values in the
>> units documented in Documentation/ABI/testing/sysfs-bus-iio?
> 
> "Units after application of scale and offset are millivolts."
> 
> The driver reports millivolts on OMAP5 uEVM, e.g. VBUS = 5013 (mV).
cool
> 
>> They could be, but I would like a comment saying that.
>>
>>> +		ret = palmas_gpadc_read_prepare(adc, adc_chan);
>>> +		if (ret < 0)
>>> +			goto out;
>>> +
>>> +		ret = palmas_gpadc_start_conversion(adc, adc_chan);
>>> +		if (ret < 0) {
>>> +			dev_err(adc->dev,
>>> +			"ADC start coversion failed\n");
>>> +			goto out;
>>> +		}
>>> +
>>> +		if (mask == IIO_CHAN_INFO_PROCESSED)
>>> +			ret = palmas_gpadc_get_calibrated_code(
>>> +							adc, adc_chan, ret);
>>> +
>>> +		*val = ret;
>>> +
>>> +		ret = IIO_VAL_INT;
>>> +		goto out;
>>> +	}
>>> +
>>> +	mutex_unlock(&indio_dev->mlock);
>>> +	return ret;
>>> +
>>> +out:
>>> +	palmas_gpadc_read_done(adc, adc_chan);
>>> +	mutex_unlock(&indio_dev->mlock);
>>> +	return ret;
>>> +}
>>> +
>>> +static const struct iio_info palmas_gpadc_iio_info = {
>>> +	.read_raw = palmas_gpadc_read_raw,
>>> +	.driver_module = THIS_MODULE,
>>> +};
>>> +
>>> +#define PALMAS_ADC_CHAN_IIO(chan, _type)			\
>>> +{									\
>>> +	.datasheet_name = PALMAS_DATASHEET_NAME(chan),			\
>>> +	.type = _type,							\
>> Right now they are all voltage channels, why have that specifiable in this
>> macro?
> 
> There are two channels that are or can be temperature values. Presented as
> voltages across an NTC/Diode. Since the NTC is outside the Palmas chip the
> conversion into temperature is left to user-space. The type value is in preparation
> for this and I have changed it to IIO_TEMPERATURE.
> 
>>> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
>>> +			BIT(IIO_CHAN_INFO_PROCESSED),			\
>> Hmm. This is very very rarely justified.  Either the driver has
>> nice linear relationship between the raw value and the processed one, in which
>> case you should be providing *_RAW, *_OFFSET and *_SCALE and leaving the maths
>> to userspace (or the in kernel wrappers), or they are non linear in which case
>> only the processed value is of interest and the raw one not directly so.
>> (the only exception to this is light sensors where the processed channel
>> is often a computed channel from several input _raw readings).
> 
> If I understand the driver correctty (I am not the original author), the calibration
> is indeed linear, but translating the calibration data into *_RAW, *_OFFSET and *_SCALE
> is different from how Texas suggests to do the calculation (maybe avoiding rounding
> and truncation errors).
> 
> Well, we could simply remove the _RAW values - but IMHO it is sometimes good
> to be able to see what is going on. They can still be ignored by the consumer.
hmm.. I'm not totally happy with having both, but will let it go I think.
> 
>>
>>> +	.indexed = 1,							\
>>> +	.channel = PALMAS_ADC_CH_##chan,				\
>> Given this maps back to the value of chan, just put that in as a number
>> and loose the enum.  Channel is used in the naming so it doesn't
>> make sense to obscure that behind an enum anyway.
> 
> Well, enum constants allow to check against typos and that it matches the
> channel numbers defined in the header. 
> 
> So PALMAS_ADC_CHAN_IIO(IN24, ...) would make gcc warn while.
> PALMAS_ADC_CHAN_IIO(24, ...) would fail in operation.
> 
> Of course we have no typo, because it is already checked to compile :)
> 
> So I understand by which good C coding practise it was probably introduced
> and am undecided if it is good to keep or not.
hmm. not writing silly bugs seems like a better idea to me, or convoluted
tricky to check code.  I'm not that fussed however.
> 
>>> +}
>>> +
>>> +static const struct iio_chan_spec palmas_gpadc_iio_channel[] = {
>>> +	PALMAS_ADC_CHAN_IIO(IN0, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN1, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN2, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN3, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN4, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN5, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN6, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN7, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN8, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN9, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN10, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN11, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN12, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN13, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN14, IIO_VOLTAGE),
>>> +	PALMAS_ADC_CHAN_IIO(IN15, IIO_VOLTAGE),
>>> +};
>>> +
>>> +static int palmas_gpadc_probe(struct platform_device *pdev)
>>> +{
>>> +	struct palmas_gpadc *adc;
>>> +	struct palmas_platform_data *pdata;
>>> +	struct palmas_gpadc_platform_data *adc_pdata;
>>> +	struct iio_dev *iodev;
>>> +	int ret, i;
>>> +
>>> +	pdata = dev_get_platdata(pdev->dev.parent);
>>> +	if (!pdata || !pdata->gpadc_pdata) {
>>> +		dev_err(&pdev->dev, "No platform data\n");
>>> +		return -ENODEV;
>>> +	}
>>> +	adc_pdata = pdata->gpadc_pdata;
>>> +
>>> +	iodev = iio_device_alloc(sizeof(*adc));
>>> +	if (!iodev) {
>>> +		dev_err(&pdev->dev, "iio_device_alloc failed\n");
>>> +		return -ENOMEM;
>>> +	}
>>> +
>>> +	if (adc_pdata->iio_maps) {
>>> +		ret = iio_map_array_register(iodev, adc_pdata->iio_maps);
>>> +		if (ret < 0) {
>>> +			dev_err(&pdev->dev, "iio_map_array_register failed\n");
>>> +			goto out;
>>> +		}
>>> +	}
>>> +
>>> +	adc = iio_priv(iodev);
>>> +	adc->dev = &pdev->dev;
>>> +	adc->palmas = dev_get_drvdata(pdev->dev.parent);
>>> +	adc->adc_info = palmas_gpadc_info;
>>> +	init_completion(&adc->conv_completion);
>>> +	dev_set_drvdata(&pdev->dev, iodev);
>>> +
>>> +	adc->auto_conversion_period = adc_pdata->auto_conversion_period_ms;
>>> +	adc->irq = palmas_irq_get_virq(adc->palmas, PALMAS_GPADC_EOC_SW_IRQ);
>>> +	ret = request_threaded_irq(adc->irq, NULL,
>>> +		palmas_gpadc_irq,
>>> +		IRQF_ONESHOT | IRQF_EARLY_RESUME, dev_name(adc->dev),
>>> +		adc);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev,
>>> +			"request irq %d failed: %dn", adc->irq, ret);
>>> +		goto out_unregister_map;
>>> +	}
>>> +
>>> +	if (adc_pdata->adc_wakeup1_data) {
>>> +		memcpy(&adc->wakeup1_data, adc_pdata->adc_wakeup1_data,
>>> +			sizeof(adc->wakeup1_data));
>>> +		adc->wakeup1_enable = true;
>>> +		adc->irq_auto_0 =  platform_get_irq(pdev, 1);
>>> +		ret = request_threaded_irq(adc->irq_auto_0, NULL,
>>> +				palmas_gpadc_irq_auto,
>>> +				IRQF_ONESHOT | IRQF_EARLY_RESUME,
>>> +				"palmas-adc-auto-0", adc);
>>> +		if (ret < 0) {
>>> +			dev_err(adc->dev, "request auto0 irq %d failed: %dn",
>>> +				adc->irq_auto_0, ret);
>>> +			goto out_irq_free;
>>> +		}
>>> +	}
>>> +
>>> +	if (adc_pdata->adc_wakeup2_data) {
>>> +		memcpy(&adc->wakeup2_data, adc_pdata->adc_wakeup2_data,
>>> +				sizeof(adc->wakeup2_data));
>>> +		adc->wakeup2_enable = true;
>>> +		adc->irq_auto_1 =  platform_get_irq(pdev, 2);
>>> +		ret = request_threaded_irq(adc->irq_auto_1, NULL,
>>> +				palmas_gpadc_irq_auto,
>>> +				IRQF_ONESHOT | IRQF_EARLY_RESUME,
>>> +				"palmas-adc-auto-1", adc);
>>> +		if (ret < 0) {
>>> +			dev_err(adc->dev, "request auto1 irq %d failed: %dn",
>>> +				adc->irq_auto_1, ret);
>>> +			goto out_irq_auto0_free;
>>> +		}
>>> +	}
>>> +
>> I've requested kernel-doc above for ch0_current, but if that doesn't
>> make it clear what matic is going on here then some comments here
>> would be good.
> 
> I think the best location to make that clear is the DT bindings where you
> can set the values (in microamperes and not encoded values).
> 
> Basically you specify in the adc_pdata the uA you want and this function
> does a quantization to perpare 2 bits that can be written into the control
> registers later on.
> 
>>> +	if (adc_pdata->ch0_current == 0)
>>> +		adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_0;
>>> +	else if (adc_pdata->ch0_current <= 5)
>>> +		adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_5;
>>> +	else if (adc_pdata->ch0_current <= 15)
>>> +		adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_15;
>>> +	else
>>> +		adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_20;
>>> +
>>> +	if (adc_pdata->ch3_current == 0)
>>> +		adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_0;
>>> +	else if (adc_pdata->ch3_current <= 10)
>>> +		adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_10;
>>> +	else if (adc_pdata->ch3_current <= 400)
>>> +		adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_400;
>>> +	else
>>> +		adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_800;
>>> +
>>> +	adc->extended_delay = adc_pdata->extended_delay;
>>> +
>>> +	iodev->name = MOD_NAME;
>>> +	iodev->dev.parent = &pdev->dev;
>>> +	iodev->info = &palmas_gpadc_iio_info;
>>> +	iodev->modes = INDIO_DIRECT_MODE;
>>> +	iodev->channels = palmas_gpadc_iio_channel;
>>> +	iodev->num_channels = ARRAY_SIZE(palmas_gpadc_iio_channel);
>>> +
>>> +	ret = iio_device_register(iodev);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "iio_device_register() failed: %d\n", ret);
>>> +		goto out_irq_auto1_free;
>>> +	}
>>> +
>>> +	device_set_wakeup_capable(&pdev->dev, 1);
>>> +	for (i = 0; i < PALMAS_ADC_CH_MAX; i++) {
>>> +		if (!(adc->adc_info[i].is_correct_code))
>>> +			palmas_gpadc_calibrate(adc, i);
>>> +	}
>>> +
>>> +	if (adc->wakeup1_enable || adc->wakeup2_enable)
>>> +		device_wakeup_enable(&pdev->dev);
>> There is no match for this in the remove... Should there be one?
>> (not an interface I know anything about!)
> 
> Same for me and I have no idea how to test. But it looks reasonable to call
> device_wakeup_disable(). Therefore I have added.
> 
>>> +
>>> +	return 0;
>>> +
>>> +out_irq_auto1_free:
>>> +	if (adc_pdata->adc_wakeup2_data)
>>> +		free_irq(adc->irq_auto_1, adc);
>>> +out_irq_auto0_free:
>>> +	if (adc_pdata->adc_wakeup1_data)
>>> +		free_irq(adc->irq_auto_0, adc);
>>> +out_irq_free:
>>> +	free_irq(adc->irq, adc);
>>> +out_unregister_map:
>>> +	if (adc_pdata->iio_maps)
>>> +		iio_map_array_unregister(iodev);
>>> +out:
>>> +	iio_device_free(iodev);
>>> +	return ret;
>>> +}
>>> +
>>> +static int palmas_gpadc_remove(struct platform_device *pdev)
>>> +{
>>> +	struct iio_dev *iodev = dev_to_iio_dev(&pdev->dev);
>>> +	struct palmas_gpadc *adc = iio_priv(iodev);
>>> +	struct palmas_platform_data *pdata = dev_get_platdata(pdev->dev.parent);
>>> +
>>> +	if (pdata->gpadc_pdata->iio_maps)
>>> +		iio_map_array_unregister(iodev);
>>> +	iio_device_unregister(iodev);
>>> +	free_irq(adc->irq, adc);
>>> +	if (adc->wakeup1_enable)
>>> +		free_irq(adc->irq_auto_0, adc);
>>> +	if (adc->wakeup2_enable)
>>> +		free_irq(adc->irq_auto_1, adc);
>>> +	iio_device_free(iodev);
>> Could use demv_iio_device_alloc and not need the free here or on error path.
>> Given location of irq frees you could do devm allocations of them as well
>> which would cut out a fair bit of code without reordering anything.
> 
> has also been proposed by Peter Meerwald and has been reworked.
> 
>>
>> nit: blank line here.
>>> +	return 0;
>>> +}
>>> +
>>> +#ifdef CONFIG_PM_SLEEP
>>> +static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc)
>>> +{
>>> +	int adc_period, conv;
>>> +	int i;
>>> +	int ch0 = 0, ch1 = 0;
>>> +	int thres;
>>> +	int ret;
>>> +
>>> +	adc_period = adc->auto_conversion_period;
>>> +	for (i = 0; i < 16; ++i) {
>> spacing around the /
>>> +		if (((1000 * (1 << i))/32) < adc_period)
>>> +			continue;
>>> +	}
>>> +	if (i > 0)
>>> +		i--;
>>> +	adc_period = i;
>>> +	ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>>> +			PALMAS_GPADC_AUTO_CTRL,
>>> +			PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_MASK,
>>> +			adc_period);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "AUTO_CTRL write failed: %d\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	conv = 0;
>>> +	if (adc->wakeup1_enable) {
>>> +		int is_high;
>>> +
>>> +		ch0 = adc->wakeup1_data.adc_channel_number;
>>> +		conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN;
>>> +		if (adc->wakeup1_data.adc_high_threshold > 0) {
>>> +			thres = adc->wakeup1_data.adc_high_threshold;
>>> +			is_high = 0;
>>> +		} else {
>>> +			thres = adc->wakeup1_data.adc_low_threshold;
>>> +			is_high = BIT(7);
>> BIT(7) is a bit random, so I'd suggest defining an appropriate macro
>> for it this register field.
> 
> There is indeed a proper macro in palmas.h
> 
>>
>>> +		}
>>> +
>>> +		ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>>> +				PALMAS_GPADC_THRES_CONV0_LSB, thres & 0xFF);
>>> +		if (ret < 0) {
>>> +			dev_err(adc->dev,
>>> +				"THRES_CONV0_LSB write failed: %d\n", ret);
>>> +			return ret;
>>> +		}
>>> +
>>> +		ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>>> +				PALMAS_GPADC_THRES_CONV0_MSB,
>>> +				((thres >> 8) & 0xF) | is_high);
>>> +		if (ret < 0) {
>>> +			dev_err(adc->dev,
>>> +				"THRES_CONV0_MSB write failed: %d\n", ret);
>>> +			return ret;
>>> +		}
>>> +	}
>>> +
>>> +	if (adc->wakeup2_enable) {
>>> +		int is_high;
>>> +
>>> +		ch1 = adc->wakeup2_data.adc_channel_number;
>>> +		conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN;
>>> +		if (adc->wakeup2_data.adc_high_threshold > 0) {
>>> +			thres = adc->wakeup2_data.adc_high_threshold;
>>> +			is_high = 0;
>>> +		} else {
>>> +			thres = adc->wakeup2_data.adc_low_threshold;
>>> +			is_high = BIT(7);
>>> +		}
>>> +
>>> +		ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>>> +				PALMAS_GPADC_THRES_CONV1_LSB, thres & 0xFF);
>>> +		if (ret < 0) {
>>> +			dev_err(adc->dev,
>>> +				"THRES_CONV1_LSB write failed: %d\n", ret);
>>> +			return ret;
>>> +		}
>>> +
>>> +		ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>>> +				PALMAS_GPADC_THRES_CONV1_MSB,
>>> +				((thres >> 8) & 0xF) | is_high);
>>> +		if (ret < 0) {
>>> +			dev_err(adc->dev,
>>> +				"THRES_CONV1_MSB write failed: %d\n", ret);
>>> +			return ret;
>>> +		}
>>> +	}
>>> +
>>> +	ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>>> +			PALMAS_GPADC_AUTO_SELECT, (ch1 << 4) | ch0);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "AUTO_SELECT write failed: %d\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
>>> +			PALMAS_GPADC_AUTO_CTRL,
>>> +			PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN |
>>> +			PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN, conv);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "AUTO_CTRL write failed: %d\n", ret);
>>> +		return ret;
>>> +	}
>> nitpick. Blank line here please.
>>> +	return 0;
>>> +}
>>> +
>>> +static int palmas_adc_wakeup_reset(struct palmas_gpadc *adc)
>>> +{
>>> +	int ret;
>>> +
>>> +	ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
>>> +			PALMAS_GPADC_AUTO_SELECT, 0);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "AUTO_SELECT write failed: %d\n", ret);
>>> +		return ret;
>>> +	}
>>> +
>>> +	ret = palmas_disable_auto_conversion(adc);
>>> +	if (ret < 0) {
>>> +		dev_err(adc->dev, "Disable auto conversion failed: %d\n", ret);
>>> +		return ret;
>>> +	}
>>> +	return 0;
>>> +}
>>> +
>>> +static int palmas_gpadc_suspend(struct device *dev)
>>> +{
>>> +	struct iio_dev *iodev = dev_to_iio_dev(dev);
>>> +	struct palmas_gpadc *adc = iio_priv(iodev);
>>> +	int wakeup = adc->wakeup1_enable || adc->wakeup2_enable;
>>> +	int ret;
>>> +
>>> +	if (!device_may_wakeup(dev) || !wakeup)
>>> +		return 0;
>>> +
>>> +	ret = palmas_adc_wakeup_configure(adc);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	if (adc->wakeup1_enable)
>>> +		enable_irq_wake(adc->irq_auto_0);
>>> +
>>> +	if (adc->wakeup2_enable)
>>> +		enable_irq_wake(adc->irq_auto_1);
>> nitpick. Blank line here please.
>>> +	return 0;
>>> +}
>>> +
>>> +static int palmas_gpadc_resume(struct device *dev)
>>> +{
>>> +	struct iio_dev *iodev = dev_to_iio_dev(dev);
>>> +	struct palmas_gpadc *adc = iio_priv(iodev);
>>> +	int wakeup = adc->wakeup1_enable || adc->wakeup2_enable;
>>> +	int ret;
>>> +
>>> +	if (!device_may_wakeup(dev) || !wakeup)
>>> +		return 0;
>>> +
>>> +	ret = palmas_adc_wakeup_reset(adc);
>>> +	if (ret < 0)
>>> +		return ret;
>>> +
>>> +	if (adc->wakeup1_enable)
>>> +		disable_irq_wake(adc->irq_auto_0);
>>> +
>>> +	if (adc->wakeup2_enable)
>>> +		disable_irq_wake(adc->irq_auto_1);
>>> +
>>> +	return 0;
>>> +};
>>> +#endif
>>> +
>>> +static const struct dev_pm_ops palmas_pm_ops = {
>>> +	SET_SYSTEM_SLEEP_PM_OPS(palmas_gpadc_suspend,
>>> +				palmas_gpadc_resume)
>>> +};
>>> +
>>> +static struct platform_driver palmas_gpadc_driver = {
>>> +	.probe = palmas_gpadc_probe,
>>> +	.remove = palmas_gpadc_remove,
>>> +	.driver = {
>>> +		.name = MOD_NAME,
>>> +		.owner = THIS_MODULE,
>>> +		.pm = &palmas_pm_ops,
>>> +	},
>>> +};
>>> +
>>> +static int __init palmas_gpadc_init(void)
>>> +{
>>> +	return platform_driver_register(&palmas_gpadc_driver);
>>> +}
>>> +module_init(palmas_gpadc_init);
>>> +
>>> +static void __exit palmas_gpadc_exit(void)
>>> +{
>>> +	platform_driver_unregister(&palmas_gpadc_driver);
>>> +}
>>> +module_exit(palmas_gpadc_exit);
>>> +
>>> +MODULE_DESCRIPTION("palmas GPADC driver");
>>> +MODULE_AUTHOR("Pradeep Goudagunta<pgoudagunta@xxxxxxxxxx>");
>>> +MODULE_ALIAS("platform:palmas-gpadc");
>>> +MODULE_LICENSE("GPL v2");
>>> diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
>>> index bb270bd..60acfa2 100644
>>> --- a/include/linux/mfd/palmas.h
>>> +++ b/include/linux/mfd/palmas.h
>>> @@ -133,21 +133,32 @@ struct palmas_pmic_driver_data {
>>> 			    struct regulator_config config);
>>> };
>>>
>>> +struct palmas_adc_wakeup_property {
>>> +	int adc_channel_number;
>>> +	int adc_high_threshold;
>>> +	int adc_low_threshold;
>>> +};
>>> +
>>> struct palmas_gpadc_platform_data {
>>> 	/* Channel 3 current source is only enabled during conversion */
>>> 	int ch3_current;
>>> -
>>> 	/* Channel 0 current source can be used for battery detection.
>>> -	 * If used for battery detection this will cause a permanent current
>>> +	* If used for battery detection this will cause a permanent current
>>> 	 * consumption depending on current level set here.
>>> -	 */
>>> +		 */
>> Some oddness occured here in patch creation.  Do check your own patches
>> as we all end up with stuff like this from time to time that should
>> be picked up on beofre sending out.  It just adds noise.
>>> 	int ch0_current;
>>> +	bool extended_delay;
>>>
>>> 	/* default BAT_REMOVAL_DAT setting on device probe */
>>> 	int bat_removal;
>>>
>>> 	/* Sets the START_POLARITY bit in the RT_CTRL register */
>>> 	int start_polarity;
>>> +
>>> +	struct iio_map *iio_maps;
>>> +	int auto_conversion_period_ms;
>>> +	struct palmas_adc_wakeup_property *adc_wakeup1_data;
>>> +	struct palmas_adc_wakeup_property *adc_wakeup2_data;
>>> };
>>>
>>> struct palmas_reg_init {
>>> @@ -403,7 +414,7 @@ struct palmas_gpadc_calibration {
>>> 	s32 gain_error;
>>> 	s32 offset_error;
>>> };
>>> -
>>> +/*
>>> struct palmas_gpadc {
>>> 	struct device *dev;
>>> 	struct palmas *palmas;
>>> @@ -426,6 +437,9 @@ struct palmas_gpadc {
>>> 	int conv1_channel;
>>> 	int rt_channel;
>>> };
>>> +*/
>> So there's a commented out bit of code in this patch?  Sort
>> that out before the next version.
> 
> We forgot to delete...
> 
>>
>>> +
>>> +#define PALMAS_DATASHEET_NAME(_name)	"palmas-gpadc-chan-"#_name
>>>
>>> struct palmas_gpadc_result {
>>> 	s32 raw_code;
>>> @@ -519,6 +533,42 @@ enum palmas_irqs {
>>> 	PALMAS_NUM_IRQ,
>>> };
>>>
>>> +/* Palma GPADC Channels */
>>> +enum {
>>> +	PALMAS_ADC_CH_IN0,
>>> +	PALMAS_ADC_CH_IN1,
>>> +	PALMAS_ADC_CH_IN2,
>>> +	PALMAS_ADC_CH_IN3,
>>> +	PALMAS_ADC_CH_IN4,
>>> +	PALMAS_ADC_CH_IN5,
>>> +	PALMAS_ADC_CH_IN6,
>>> +	PALMAS_ADC_CH_IN7,
>>> +	PALMAS_ADC_CH_IN8,
>>> +	PALMAS_ADC_CH_IN9,
>>> +	PALMAS_ADC_CH_IN10,
>>> +	PALMAS_ADC_CH_IN11,
>>> +	PALMAS_ADC_CH_IN12,
>>> +	PALMAS_ADC_CH_IN13,
>>> +	PALMAS_ADC_CH_IN14,
>>> +	PALMAS_ADC_CH_IN15,
>> This does rather feel like an enum that doesn't add anything
>> as the enum values = the index given at the end anyway...
> 
> As said it adds some (questionable) check by the compiler,
> 
>>> +	PALMAS_ADC_CH_MAX,
> 
> and this constant is indirectly defined.
> 
>>> +};
>>> +
>>> +/* Palma GPADC Channel0 Current Source */
>>> +enum {
>>> +	PALMAS_ADC_CH0_CURRENT_SRC_0,
>>> +	PALMAS_ADC_CH0_CURRENT_SRC_5,
>>> +	PALMAS_ADC_CH0_CURRENT_SRC_15,
>>> +	PALMAS_ADC_CH0_CURRENT_SRC_20,
>>> +};
>> Nitpick: new line here.
>>> +/* Palma GPADC Channel3 Current Source */
>>> +enum {
>>> +	PALMAS_ADC_CH3_CURRENT_SRC_0,
>>> +	PALMAS_ADC_CH3_CURRENT_SRC_10,
>>> +	PALMAS_ADC_CH3_CURRENT_SRC_400,
>>> +	PALMAS_ADC_CH3_CURRENT_SRC_800,
>>> +};
>>> +
>>> struct palmas_pmic {
>>> 	struct palmas *palmas;
>>> 	struct device *dev;
>>> @@ -2999,6 +3049,7 @@ enum usb_irq_events {
>>> #define PALMAS_GPADC_TRIM14					0x0D
>>> #define PALMAS_GPADC_TRIM15					0x0E
>>> #define PALMAS_GPADC_TRIM16					0x0F
>>> +#define PALMAS_GPADC_TRIMINVALID				-1
>>>
>>> /* TPS659038 regen2_ctrl offset iss different from palmas */
>>> #define TPS659038_REGEN2_CTRL					0x12
>>>
>>
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/