Re: [Update][PATCH 3/3] input: i8042: Avoid resetting controller on system suspend/resume

[Rafael J. Wysocki]

On Wednesday, October 07, 2015 03:03:57 AM Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> 
> If the upcoming system suspend is not going to be handled by the
> platform firmware, like in the suspend-to-idle case, it is not
> necessary to reset the controller in i8042_pm_suspend(), so avoid
> doing that.
> 
> Moreover, if the system resume currently in progress has not been
> started by the platform firmware, like in the suspend-to-idle case,
> i8042_controller_resume() need not be called by i8042_pm_resume(),
> so avoid doing that too in that case.
> 
> Additionally, try to catch the event that woke up the system by
> calling the interrupt handler early during system resume if it has
> not been started by the platform firmware.
> 
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

If there are no more comments here, I'll tentatively queue it up for v4.4
along with the [1-2/3] from this series.

Please let me know if there are any problems with that.

Thanks,
Rafael


> ---
>  drivers/input/serio/i8042.c |   32 +++++++++++++++++++++++++++-----
>  1 file changed, 27 insertions(+), 5 deletions(-)
> 
> Index: linux-pm/drivers/input/serio/i8042.c
> ===================================================================
> --- linux-pm.orig/drivers/input/serio/i8042.c
> +++ linux-pm/drivers/input/serio/i8042.c
> @@ -24,6 +24,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/i8042.h>
>  #include <linux/slab.h>
> +#include <linux/suspend.h>
>  
>  #include <asm/io.h>
>  
> @@ -1170,7 +1171,8 @@ static int i8042_pm_suspend(struct devic
>  {
>  	int i;
>  
> -	i8042_controller_reset(true);
> +	if (pm_suspend_via_firmware())
> +		i8042_controller_reset(true);
>  
>  	/* Set up serio interrupts for system wakeup. */
>  	for (i = 0; i < I8042_NUM_PORTS; i++) {
> @@ -1183,8 +1185,17 @@ static int i8042_pm_suspend(struct devic
>  	return 0;
>  }
>  
> +static int i8042_pm_resume_noirq(struct device *dev)
> +{
> +	if (!pm_resume_via_firmware())
> +		i8042_interrupt(0, NULL);
> +
> +	return 0;
> +}
> +
>  static int i8042_pm_resume(struct device *dev)
>  {
> +	bool force_reset;
>  	int i;
>  
>  	for (i = 0; i < I8042_NUM_PORTS; i++) {
> @@ -1195,11 +1206,21 @@ static int i8042_pm_resume(struct device
>  	}
>  
>  	/*
> -	 * On resume from S2R we always try to reset the controller
> -	 * to bring it in a sane state. (In case of S2D we expect
> -	 * BIOS to reset the controller for us.)
> +	 * If platform firmware was not going to be involved in suspend, we did
> +	 * not restore the controller state to whatever it had been at boot
> +	 * time, so we do not need to do anything.
>  	 */
> -	return i8042_controller_resume(true);
> +	if (!pm_suspend_via_firmware())
> +		return 0;
> +
> +	/*
> +	 * We only need to reset the controller if we are resuming after handing
> +	 * off control to the platform firmware, otherwise we can simply restore
> +	 * the mode.
> +	 */
> +	force_reset = pm_resume_via_firmware();
> +
> +	return i8042_controller_resume(force_reset);
>  }
>  
>  static int i8042_pm_thaw(struct device *dev)
> @@ -1223,6 +1244,7 @@ static int i8042_pm_restore(struct devic
>  
>  static const struct dev_pm_ops i8042_pm_ops = {
>  	.suspend	= i8042_pm_suspend,
> +	.resume_noirq	= i8042_pm_resume_noirq,
>  	.resume		= i8042_pm_resume,
>  	.thaw		= i8042_pm_thaw,
>  	.poweroff	= i8042_pm_reset,
> 
> --

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/