[PATCH 5/8] regulator: introduce regulator_get_voltage_floor

[Sascha Hauer]

Currently when we call set_voltage on a regulator we do not know
with which voltage we will end up with. Once we start with propagating
voltage changes to the supplies we have to know that before we start
doing anything. This patch introduces regulator_get_voltage_floor which
calculates the minimum voltage a regulator supports which is higher
than a given minimum voltage.

Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
 drivers/regulator/core.c | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index bd66097..6623538 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2764,6 +2764,45 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 	return ret;
 }
 
+/*
+ * Return the minimum voltage supported by a regulator that is higher or equal
+ * to a given voltage.
+ */
+static int regulator_get_voltage_floor(struct regulator *regulator, int min_uV)
+{
+	struct regulator_dev *rdev = regulator->rdev;
+	int num_voltages;
+	int best = INT_MAX;
+	int max_uV = INT_MAX;
+	int i, now, ret;
+
+	/* constraints check */
+	ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
+	if (ret < 0)
+		return ret;
+
+	ret = regulator_check_consumers(rdev, &min_uV, &max_uV);
+	if (ret < 0)
+		return ret;
+
+	num_voltages = regulator_count_voltages(regulator);
+	if (num_voltages < 0)
+		return num_voltages;
+
+	for (i = 0; i < num_voltages; i++) {
+		now = _regulator_list_voltage(regulator, i, 0);
+		if (now < 0)
+			continue;
+		if (now < best && now >= min_uV)
+			best = now;
+	}
+
+	if (best > max_uV)
+		return -EINVAL;
+
+	return best;
+}
+
 static int regulator_set_voltage_unlocked(struct regulator *regulator,
 					  int min_uV, int max_uV)
 {
-- 
2.6.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/