Re: [PATCH v2 4/5] mfd: arizona: Update DT binding documentation for mic detection
From: Lee Jones
Date: Tue Oct 13 2015 - 09:43:47 EST
On Tue, 13 Oct 2015, Charles Keepax wrote:
> On Tue, Oct 13, 2015 at 09:08:00AM +0100, Lee Jones wrote:
> > On Fri, 02 Oct 2015, Charles Keepax wrote:
> >
> > > Add additional bindings to allow configuration of the system specific
> > > microphone detection settings.
> > >
> > > Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > > ---
> > > Documentation/devicetree/bindings/mfd/arizona.txt | 21 +++++++++++++++++++++
> > > include/dt-bindings/mfd/arizona.h | 5 +++++
> > > 2 files changed, 26 insertions(+), 0 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
> > > index a8fee60..b98a11b 100644
> > > --- a/Documentation/devicetree/bindings/mfd/arizona.txt
> > > +++ b/Documentation/devicetree/bindings/mfd/arizona.txt
> > > @@ -73,6 +73,27 @@ Optional properties:
> > > If this node is not mentioned or if the value is unknown, then
> > > headphone detection mode is set to HPDETL.
> > >
> > > + - wlf,micd-software-compare : Use a software comparison to determine mic
> > > + presence
> > > + - wlf,micd-detect-debounce : Additional software microphone detection
> > > + debounce specified in milliseconds.
> > > + - wlf,micd-pol-gpio : GPIO specifier for the GPIO controlling the headset
> > > + polarity if one exists.
> > > + - wlf,micd-bias-start-time : Time allowed for MICBIAS to startup prior to
> > > + performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX
> > > + defines.
> > > + - wlf,micd-rate : Delay between successive microphone detection measurements,
> > > + specified as per the ARIZONA_MICD_TIME_XXX defines.
> > > + - wlf,micd-dbtime : Microphone detection hardware debounces specified as the
> > > + number of measurements to take, valid values being 2 and 4.
> > > + - wlf,micd-timeout : Timeout for microphone detection, specified in
> > > + milliseconds.
> > > + - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone
> > > + detection.
> > > +
> > > + - wlf,gpsw : Settings for the general purpose switch, set as one of the
> > > + ARIZONA_GPSW_XXX defines.
> >
> > Where are all of these bindings to be consumed?
>
> In the extcon driver it handles all jack detection in the Arizona
> devices.
Okay, perfect. Please move them to the Extcon doc. :)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/