[PATCH v2 0/4] Add support for STM32 DMA

[M'boumba Cedric Madianga]

This patchset adds support for the STM32 DMA controller.
This controller provides 8 channels dedicated to managing memory access
request from one or more peripherals.
Each stream can have up to 8 requests in total.

Changes since v1:
- remove dmamux boolean as it is not needed
- replace dma by DMA in Kconfig
- add default return value in stm32_dma_get_width()
- add defalut return value in stm32_dma_get_burst()
- use lower case for constant hexadecimal values

M'boumba Cedric Madianga (4):
  dt-bindings: Document the STM32 DMA bindings
  dmaengine: Add STM32 DMA driver
  ARM: dts: Add STM32 DMA support for STM32F429 MCU
  ARM: configs: Add STM32 DMA support in STM32 defconfig

 .../devicetree/bindings/dma/stm32-dma.txt          |   98 ++
 arch/arm/boot/dts/stm32f429.dtsi                   |   31 +
 arch/arm/configs/stm32_defconfig                   |    2 +
 drivers/dma/Kconfig                                |   12 +
 drivers/dma/Makefile                               |    1 +
 drivers/dma/stm32-dma.c                            | 1175 ++++++++++++++++++++
 6 files changed, 1319 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/stm32-dma.txt
 create mode 100644 drivers/dma/stm32-dma.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/