Re: [PATCH] rtc: pcf8563: disable CLKOUT

[Alexandre Belloni]

Hi,

On 13/10/2015 at 07:08:58 +0200, Heiko Schocher wrote :
> Disable the CLKOUT of the RTC after power-up.
> After power-up/reset of the RTC, CLKOUT is enabled by default,
> with CLKOUT enabled the RTC chip has 2-3 times higher power
> consumption. If you do not need CLKOUT, you can disable the
> CLKOUT with setting "disable-clkout" property.
> 

I think you can simply unconditionally disable clkout. My preferred way
of doing what you suggest is probably to register a clock in the CCF. If
the clock is not used, it will be automatically disabled.
It will also provide a generic way of setting the clkout frequency (some
RTC are able to output 32kHZ, 1kHz and 1Hz).

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/