Re: 4.3-rc3 BAR allocation problems on multiple machines
From: Yinghai Lu
Date: Tue Oct 13 2015 - 20:43:41 EST
On Tue, Oct 13, 2015 at 1:39 PM, Meelis Roos <mroos@xxxxxxxx> wrote:
>
> 0001:00:07.0 ISA bridge: ULi Electronics Inc. M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+]
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Region 0: [virtual] I/O ports at 0000 [size=64K]
> Region 1: Memory at <unassigned> (32-bit, non-prefetchable) [size=1M]
> Region 2: Memory at <unassigned> (32-bit, non-prefetchable) [size=1M]
> Region 3: [virtual] Memory at fffff80100000000 (32-bit, non-prefetchable)
> Region 4: [virtual] Memory at fffff80100000000 (32-bit, non-prefetchable)
> Region 5: [virtual] Memory at fffff80100000000 (32-bit, non-prefetchable)
> [virtual] Expansion ROM at fffff80100000000 [disabled]
> Capabilities: [a0] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> 00: b9 10 33 15 0f 00 10 02 00 00 01 06 00 00 00 00
> 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
> 40: 03 13 4b 80 83 09 00 47 00 00 06 00 00 00 eb 31
> 50: 00 00 00 20 90 02 20 03 66 03 00 00 00 00 00 08
> 60: 40 00 00 00 00 00 00 00 00 00 00 00 80 20 00 00
> 70: 00 00 0a 00 47 00 00 db 04 02 00 04 00 80 01 90
> 80: a5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> a0: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Please check attached patch.
Thanks
Yinghai
Subject: [PATCH] PCI: Ignore BAR for ALi M1533 PCI-ISA bridge
Meelis reported strange conflicts on sparc v210:
pci 0001:00:07.0: can't claim BAR 2 [mem 0x7ff00000000-0x7ff000fffff]: address conflict with 0001:00:07.0 [mem 0x7ff00000000-0x7ff000fffff]
pci 0001:00:06.0: can't claim BAR 0 [io 0x7fe01000000-0x7fe0100000f]: address conflict with 0001:00:07.0 [io 0x7fe01000000-0x7fe0100ffff]
pci 0001:00:0d.0: can't claim BAR 0 [io 0x7fe01000900-0x7fe01000907]: address conflict with 0001:00:07.0 [io 0x7fe01000000-0x7fe0100ffff]
pci 0001:00:0d.0: can't claim BAR 1 [io 0x7fe01000918-0x7fe0100091f]: address conflict with 0001:00:07.0 [io 0x7fe01000000-0x7fe0100ffff]
pci 0001:00:0d.0: can't claim BAR 2 [io 0x7fe01000910-0x7fe01000917]: address conflict with 0001:00:07.0 [io 0x7fe01000000-0x7fe0100ffff]
pci 0001:00:0d.0: can't claim BAR 3 [io 0x7fe01000908-0x7fe0100090f]: address conflict with 0001:00:07.0 [io 0x7fe01000000-0x7fe0100ffff]
pci 0001:00:0d.0: can't claim BAR 4 [io 0x7fe01000920-0x7fe0100092f]: address conflict with 0001:00:07.0 [io 0x7fe01000000-0x7fe0100ffff]
PCI: /pci@1e,600000 can't claim Video RAM area [mem 0x7ff000a0000-0x7ff000bffff]: address conflict with 0001:00:07.0 [mem 0x7ff00000000-0x7ff000fffff]
PCI: /pci@1e,600000 can't claim System ROM [mem 0x7ff000f0000-0x7ff000fffff]: address conflict with 0001:00:07.0 [mem 0x7ff00000000-0x7ff000fffff]
PCI: /pci@1e,600000 can't claim Video ROM [mem 0x7ff000c0000-0x7ff000c7fff]: address conflict with 0001:00:07.0 [mem 0x7ff00000000-0x7ff000fffff]
we have
pci_bus 0001:00: root bus resource [io 0x7fe01000000-0x7fe01ffffff] (bus address [0x0000-0xffffff])
pci_bus 0001:00: root bus resource [mem 0x7ff00000000-0x7ffffffffff] (bus address [0x00000000-0xffffffff])
so pci bus address in the bars for 0001:00:07.0 has all 0s.
0001:00:07.0 ISA bridge: ULi Electronics Inc. M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+]
Region 0: [virtual] I/O ports at 0000 [size=64K]
Region 1: Memory at <unassigned> (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at <unassigned> (32-bit, non-prefetchable) [size=1M]
00: b9 10 33 15 0f 00 10 02 00 00 01 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
According to http://www.versalogic.com/Support/Downloads/pdf/ali1543.pdf
page 28: The indices before 40h are read-only.
and we have all 0 from 0x10-0x2f, according to lspci.
So clean flags, and ignore them all the way include
claim and sizing and alloc etc.
Reported-by: Meelis Roos <mroos@xxxxxxxx>
Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
---
drivers/pci/quirks.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
Index: linux-2.6/drivers/pci/quirks.c
===================================================================
--- linux-2.6.orig/drivers/pci/quirks.c
+++ linux-2.6/drivers/pci/quirks.c
@@ -470,6 +470,21 @@ static void quirk_amd_nl_class(struct pc
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB,
quirk_amd_nl_class);
+
+/*
+ * ALi m1533 pci to isa bridge does not have BAR according to datasheet,
+ * clear the flags, so we will try to claim them or reallocate res.
+ */
+static void quirk_ali1533(struct pci_dev *dev)
+{
+ int i;
+
+ for (i = 0; i < PCI_ROM_RESOURCE; i++)
+ dev->resource[i].flags = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
+ quirk_ali1533);
+
static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
{
u32 devres;