[PATCH 0/3] Split Arizona DT bindings between subsystems

[Charles Keepax]

As discussed the Arizona device tree bindings documentation
will be split up into a seperate document holding properties
specific to each subsystem.

This series factors out the regulator and extcon
bindings. It will probably make sense to split out a GPIO
binding document as well but at the moment the only property
here is the gpio-defaults which are still handled in the MFD
driver and probably require significantly more thought to
split out.

Thanks,
Charles

Charles Keepax (3):
  extcon: arizona: Add extcon specific device tree binding document
  regulator: arizona: Add regulator specific device tree binding
    document
  mfd: arizona: Remove bindings covered in new subsystem specific docs

 .../devicetree/bindings/extcon/extcon-arizona.txt  |   15 +++++++++
 Documentation/devicetree/bindings/mfd/arizona.txt  |   30 ++---------------
 .../bindings/regulator/arizona-regulator.txt       |   34 ++++++++++++++++++++
 MAINTAINERS                                        |    3 ++
 4 files changed, 55 insertions(+), 27 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/extcon/extcon-arizona.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/arizona-regulator.txt

-- 
1.7.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/