[PATCH v2] scsi: kconfig: When possible, compile drivers with COMPILE_TEST
From: Luis de Bethencourt
Date: Wed Oct 14 2015 - 19:36:36 EST
These drivers only have runtime but no build time dependencies, so they can
be built for testing purposes if the Kconfig COMPILE_TEST option is enabled.
This is useful to have more build coverage and make sure that drivers are
not affected by changes that could cause build regressions.
Signed-off-by: Luis de Bethencourt <luisbg@xxxxxxxxxxxxxxx>
---
Hi,
This version corrects a typo pointed out by Randy Dunlap.
The validity of the patch is still in question after the comments by James
Bottomley. [0]
I just wanted to send a correct version as a thank you to Randy.
Thanks,
Luis
[0] https://lkml.org/lkml/2015/10/14/995
drivers/scsi/Kconfig | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index d2f480b..e90e0ca 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -416,7 +416,7 @@ config SCSI_ACARD
config SCSI_AHA152X
tristate "Adaptec AHA152X/2825 support"
- depends on ISA && SCSI
+ depends on (ISA || COMPILE_TEST) && SCSI
select SCSI_SPI_ATTRS
select CHECK_SIGNATURE
---help---
@@ -509,7 +509,7 @@ config SCSI_ADVANSYS
config SCSI_IN2000
tristate "Always IN2000 SCSI support"
- depends on ISA && SCSI
+ depends on (ISA || COMPILE_TEST) && SCSI
help
This is support for an ISA bus SCSI host adapter. You'll find more
information in <file:Documentation/scsi/in2000.txt>. If it doesn't work
@@ -657,7 +657,7 @@ config SCSI_DMX3191D
config SCSI_DTC3280
tristate "DTC3180/3280 SCSI support"
- depends on ISA && SCSI
+ depends on (ISA || COMPILE_TEST) && SCSI
select SCSI_SPI_ATTRS
select CHECK_SIGNATURE
help
@@ -776,7 +776,7 @@ config SCSI_ISCI
config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI PIO support"
- depends on ISA && SCSI
+ depends on (ISA || COMPILE_TEST) && SCSI
select SCSI_SPI_ATTRS
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
@@ -796,7 +796,7 @@ config SCSI_GENERIC_NCR5380
config SCSI_GENERIC_NCR5380_MMIO
tristate "Generic NCR5380/53c400 SCSI MMIO support"
- depends on ISA && SCSI
+ depends on (ISA || COMPILE_TEST) && SCSI
select SCSI_SPI_ATTRS
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
@@ -970,7 +970,7 @@ config SCSI_IZIP_SLOW_CTR
config SCSI_NCR53C406A
tristate "NCR53c406a SCSI support"
- depends on ISA && SCSI
+ depends on (ISA || COMPILE_TEST) && SCSI
help
This is support for the NCR53c406a SCSI host adapter. For user
configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
@@ -1238,7 +1238,7 @@ config SCSI_NCR53C8XX_NO_DISCONNECT
config SCSI_PAS16
tristate "PAS16 SCSI support"
- depends on ISA && SCSI
+ depends on (ISA || COMPILE_TEST) && SCSI
select SCSI_SPI_ATTRS
---help---
This is support for a SCSI host adapter. It is explained in section
@@ -1252,7 +1252,7 @@ config SCSI_PAS16
config SCSI_QLOGIC_FAS
tristate "Qlogic FAS SCSI support"
- depends on ISA && SCSI
+ depends on (ISA || COMPILE_TEST) && SCSI
---help---
This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
FastSCSI! cards as well as any other card based on the FASXX chip
@@ -1321,7 +1321,7 @@ config SCSI_SIM710
config SCSI_SYM53C416
tristate "Symbios 53c416 SCSI support"
- depends on ISA && SCSI
+ depends on (ISA || COMPILE_TEST) && SCSI
---help---
This is support for the sym53c416 SCSI host adapter, the SCSI
adapter that comes with some HP scanners. This driver requires that
@@ -1372,7 +1372,7 @@ config SCSI_AM53C974
config SCSI_T128
tristate "Trantor T128/T128F/T228 SCSI support"
- depends on ISA && SCSI
+ depends on (ISA || COMPILE_TEST) && SCSI
select SCSI_SPI_ATTRS
select CHECK_SIGNATURE
---help---
--
2.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/