Re: [PATCH v3 08/10] clk: ns2: add clock support for Broadcom Northstar 2 SoC

From: Scott Branden
Date: Thu Oct 15 2015 - 16:40:47 EST


We need some sort of kconfig option to differentiate NS2 clock driver from being pulled in all the time.

On 15-10-15 12:48 PM, Jon Mason wrote:
The Broadcom Northstar 2 SoC is architected under the iProc
architecture. It has the following PLLs: GENPLL SCR, GENPLL SW,
LCPLL DDR, LCPLL Ports, all derived from an onboard crystal.

Signed-off-by: Jon Mason <jonmason@xxxxxxxxxxxx>
---
drivers/clk/Makefile | 2 +-
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-ns2.c | 288 ++++++++++++++++++++++++++++++++++++
include/dt-bindings/clock/bcm-ns2.h | 72 +++++++++
4 files changed, 362 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/bcm/clk-ns2.c
create mode 100644 include/dt-bindings/clock/bcm-ns2.h

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d08b3e5..6124bd3 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -47,7 +47,7 @@ obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o
obj-$(CONFIG_COMMON_CLK_AT91) += at91/
-obj-$(CONFIG_ARCH_BCM) += bcm/
+obj-y += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-$(CONFIG_ARCH_MXC) += imx/
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index e258b28..2d1cbc5 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns2.o

NS2 code is dragged in for all IPROC SoCs. We need a config option for NS2 (CONFIG_ARCH_BCM_NS2) to avoid this (if Arnd allows this for ARMv8 processors... ?).

You can see below ARMv7 processors don't have this problem.

If not we need to add CONFIG_CLK_NS2.


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/