Re: [PATCH 1/5] mmc: sdhci-pxav3: fix optional clock name

[Sebastian Hesselbarth]

On 12.10.2015 07:46, Jisheng Zhang wrote:
> Commit 8afdc9cca27f ("mmc: sdhci-pxav3: Get optional core clock") adds
> additional optional clock support, but the clock names  isn't correct.
> The current "io" clock is really the PXAv3 SDHCI IP's "core" clock
> which is manadatory. The current "core" clock is really the IP's "axi"
> clock which is optional.
>
> Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxxx>
> ---
>   .../devicetree/bindings/mmc/sdhci-pxa.txt          |  8 ++---
>   arch/arm/boot/dts/berlin2.dtsi                     |  6 ++--
>   arch/arm/boot/dts/berlin2cd.dtsi                   |  2 +-
>   arch/arm/boot/dts/berlin2q.dtsi                    |  2 +-
>   drivers/mmc/host/sdhci-pxav3.c                     | 40 +++++++++++-----------
>   5 files changed, 29 insertions(+), 29 deletions(-)


Jisheng,

Please split the DT changes from the driver changes.

> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
> index 3d1b449..25d5ba8 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
> @@ -17,9 +17,9 @@ Required properties:
>   - reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory
>     for "marvell,armada-380-sdhci"
>   - clocks: Array of clocks required for SDHCI; requires at least one for
> -    I/O clock.
> +    core clock.
>   - clock-names: Array of names corresponding to clocks property; shall be
> -    "io" for I/O clock and "core" for optional core clock.
> +    "core" for core clock and "axi" for optional axi clock.

s/axi/bus/ ?

>   Optional properties:
>   - mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
> @@ -32,7 +32,7 @@ sdhci@d4280800 {
>   	bus-width = <8>;
>   	interrupts = <27>;
>   	clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
> -	clock-names = "io", "core";
> +	clock-names = "core", "axi";

This will break backward compatibility, right?

>   	non-removable;
>   	mrvl,clk-delay-cycles = <31>;
>   };
> @@ -45,6 +45,6 @@ sdhci@d8000 {
>   		<0x18454 0x4>;
>   	interrupts = <0 25 0x4>;
>   	clocks = <&gateclk 17>;
> -	clock-names = "io";
> +	clock-names = "core";
>   	mrvl,clk-delay-cycles = <0x1F>;
>   };
[...]
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
> index f5edf9d..cec95f1 100644
> --- a/drivers/mmc/host/sdhci-pxav3.c
> +++ b/drivers/mmc/host/sdhci-pxav3.c
> @@ -59,8 +59,8 @@
>   #define SDCE_MISC_INT_EN	(1<<1)
>
>   struct sdhci_pxa {
> +	struct clk *clk_axi;

s/clk_axi/clk_bus/g

>   	struct clk *clk_core;
> -	struct clk *clk_io;
>   	u8	power_mode;
>   	void __iomem *sdio3_conf_reg;
>   };
> @@ -381,20 +381,20 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
>   	pltfm_host = sdhci_priv(host);
>   	pltfm_host->priv = pxa;
>
> -	pxa->clk_io = devm_clk_get(dev, "io");
> -	if (IS_ERR(pxa->clk_io))
> -		pxa->clk_io = devm_clk_get(dev, NULL);
> -	if (IS_ERR(pxa->clk_io)) {
> -		dev_err(dev, "failed to get io clock\n");
> -		ret = PTR_ERR(pxa->clk_io);
> +	pxa->clk_core = devm_clk_get(dev, "core");

To maintain backward compatibility, we should still
devm_clk_get(dev, "io") here - or even better, first
probe for "io" to catch old binding semantics including
old "core"/"bus" misnaming.

If we detected old semantics, print a warning that
firmware should be updated.

Sebastian

> +	if (IS_ERR(pxa->clk_core))
> +		pxa->clk_core = devm_clk_get(dev, NULL);
> +	if (IS_ERR(pxa->clk_core)) {
> +		dev_err(dev, "failed to get core clock\n");
> +		ret = PTR_ERR(pxa->clk_core);
>   		goto err_clk_get;
>   	}
> -	pltfm_host->clk = pxa->clk_io;
> -	clk_prepare_enable(pxa->clk_io);
> +	pltfm_host->clk = pxa->clk_core;
> +	clk_prepare_enable(pxa->clk_core);
>
> -	pxa->clk_core = devm_clk_get(dev, "core");
> -	if (!IS_ERR(pxa->clk_core))
> -		clk_prepare_enable(pxa->clk_core);
> +	pxa->clk_axi = devm_clk_get(dev, "axi");
> +	if (!IS_ERR(pxa->clk_axi))
> +		clk_prepare_enable(pxa->clk_axi);
>
>   	/* enable 1/8V DDR capable */
>   	host->mmc->caps |= MMC_CAP_1_8V_DDR;
> @@ -475,8 +475,8 @@ err_add_host:
>   err_of_parse:
>   err_cd_req:
>   err_mbus_win:
> -	clk_disable_unprepare(pxa->clk_io);
>   	clk_disable_unprepare(pxa->clk_core);
> +	clk_disable_unprepare(pxa->clk_axi);
>   err_clk_get:
>   	sdhci_pltfm_free(pdev);
>   	return ret;
> @@ -494,8 +494,8 @@ static int sdhci_pxav3_remove(struct platform_device *pdev)
>
>   	sdhci_remove_host(host, 1);
>
> -	clk_disable_unprepare(pxa->clk_io);
>   	clk_disable_unprepare(pxa->clk_core);
> +	clk_disable_unprepare(pxa->clk_axi);
>
>   	sdhci_pltfm_free(pdev);
>
> @@ -542,9 +542,9 @@ static int sdhci_pxav3_runtime_suspend(struct device *dev)
>   	if (ret)
>   		return ret;
>
> -	clk_disable_unprepare(pxa->clk_io);
> -	if (!IS_ERR(pxa->clk_core))
> -		clk_disable_unprepare(pxa->clk_core);
> +	clk_disable_unprepare(pxa->clk_core);
> +	if (!IS_ERR(pxa->clk_axi))
> +		clk_disable_unprepare(pxa->clk_axi);
>
>   	return 0;
>   }
> @@ -555,9 +555,9 @@ static int sdhci_pxav3_runtime_resume(struct device *dev)
>   	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>   	struct sdhci_pxa *pxa = pltfm_host->priv;
>
> -	clk_prepare_enable(pxa->clk_io);
> -	if (!IS_ERR(pxa->clk_core))
> -		clk_prepare_enable(pxa->clk_core);
> +	clk_prepare_enable(pxa->clk_core);
> +	if (!IS_ERR(pxa->clk_axi))
> +		clk_prepare_enable(pxa->clk_axi);
>
>   	return sdhci_runtime_resume_host(host);
>   }

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/