RE: [PATCH] ARM: keystone: dts: add PCI serdes driver bindings

From: Kwok, WingMan
Date: Mon Oct 19 2015 - 07:11:06 EST


Roger,

> -----Original Message-----
> From: Quadros, Roger
> Sent: Friday, October 16, 2015 3:56 AM
> To: Kwok, WingMan; robh+dt@xxxxxxxxxx; pawel.moll@xxxxxxx;
> mark.rutland@xxxxxxx; ijc+devicetree@xxxxxxxxxxxxxx; galak@xxxxxxxxxxxxxx;
> KISHON VIJAY ABRAHAM; Karicheri, Muralidharan; bhelgaas@xxxxxxxxxx;
> ssantosh@xxxxxxxxxx; linux@xxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH] ARM: keystone: dts: add PCI serdes driver bindings
>
> WingMan,
>
> On 15/10/15 17:27, WingMan Kwok wrote:
> > This patch adds the required PCI serdes bindings whcih can then be
> > enabled by setting the corresponding statuses to "ok" in order to
> > configure and start the PCI serdes.
> >
> > This patch depends on the updates to the Keystone PCIe host driver
> > and common serdes driver patch series that is submitted separately.
> >
> > Signed-off-by: WingMan Kwok <w-kwok2@xxxxxx>
> > ---
> > arch/arm/boot/dts/k2e.dtsi | 21 +++++++++++++++++++++
> > arch/arm/boot/dts/keystone.dtsi | 21 +++++++++++++++++++++
> > 2 files changed, 42 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
> > index 675fb8e..3b36575 100644
> > --- a/arch/arm/boot/dts/k2e.dtsi
> > +++ b/arch/arm/boot/dts/k2e.dtsi
> > @@ -86,6 +86,16 @@
> > gpio,syscon-dev = <&devctrl 0x240>;
> > };
> >
> > + pcie1_phy: pciephy@2326000 {
>
> Should be
> pcie1_phy: phy@2326000 {
>

will change in next version.

> > + #phy-cells = <0>;
> > + compatible = "ti,keystone-serdes-pcie";
> > + reg = <0x02326000 0x4000>;
> > + reg-names = "serdes";
> > + link-rate-kbps = <5000000>;
> > + num-lanes = <2>;
> > + status = "disabled";
> > + };
> > +
> > pcie1: pcie@21020000 {
> > compatible = "ti,keystone-pcie","snps,dw-pcie";
> > clocks = <&clkpcie1>;
> > @@ -130,6 +140,17 @@
> > <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
> > <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
> > };
> > +
> > + /* PCIE phy */
> > + serdeses {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + serdes@0 {
> > + reg = <0>;
> > + phys = <&pcie1_phy>;
> > + };
> > + };
> > +
> > };
> >
> > mdio: mdio@24200f00 {
> > diff --git a/arch/arm/boot/dts/keystone.dtsi
> b/arch/arm/boot/dts/keystone.dtsi
> > index 72816d6..6566cc4 100644
> > --- a/arch/arm/boot/dts/keystone.dtsi
> > +++ b/arch/arm/boot/dts/keystone.dtsi
> > @@ -275,6 +275,16 @@
> > ti,syscon-dev = <&devctrl 0x2a0>;
> > };
> >
> > + pcie0_phy: pciephy@2320000 {
>
> ditto.
>

will change in next version.

> > + #phy-cells = <0>;
> > + compatible = "ti,keystone-serdes-pcie";
> > + reg = <0x02320000 0x4000>;
> > + reg-names = "serdes";
> > + link-rate-kbps = <5000000>;
> > + num-lanes = <2>;
> > + status = "disabled";
> > + };
> > +
> > pcie0: pcie@21800000 {
> > compatible = "ti,keystone-pcie", "snps,dw-pcie";
> > clocks = <&clkpcie>;
> > @@ -319,6 +329,17 @@
> > <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
> > <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
> > };
> > +
> > + /* PCIE phy */
> > + serdeses {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + serdes@0 {
> > + reg = <0>;
> > + phys = <&pcie0_phy>;
> > + };
> > + };
> > +
> > };
> > };
> > };
> >
>
> --
> cheers,
> -roger

Thanks,
WingMan