Re: [PATCH 1/4] Documentation: tps65086: Add DT bindings for the TPS65086 PMIC
From: Andrew F. Davis
Date: Mon Oct 19 2015 - 11:17:13 EST
On 10/19/2015 04:13 AM, Lee Jones wrote:
On Fri, 16 Oct 2015, Andrew F. Davis wrote:
The TPS65086 PMIC contains several regulators and a GPO controller.
Add bindings for the TPS65086 PMIC.
Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---
.../devicetree/bindings/gpio/gpio-tps65086.txt | 17 ++++++++
Documentation/devicetree/bindings/mfd/tps65086.txt | 46 ++++++++++++++++++++++
.../bindings/regulator/tps65086-regulator.txt | 36 +++++++++++++++++
Please split these up into separate patches.
There is no functional reason to bundle them up.
ACK
3 files changed, 99 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt
create mode 100644 Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
[...]
diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
new file mode 100644
index 0000000..4b6aeb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
@@ -0,0 +1,46 @@
+* TPS65086 Power Management Integrated Circuit bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65086".
Any indication that it's a PMIC?
In the compatible string?
+ - reg : Slave address.
I2C/SPI?
ACK
+ - interrupt-parent : The parent interrupt controller.
Phandled to ...
ACK
+ - interrupts : The interrupt line the device is connected to.
+ - interrupt-controller : Marks the device node as an interrupt controller.
+ - #interrupt-cells : The number of cells to describe an IRQ, this
+ should be 2. The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger
+ masks from ../interrupt-controller/interrupts.txt.
Masks? What masks?
Best to make a link to the header where the flags are defined here.
ACK
+Additional nodes defined in:
+ - Regulators : ../regulator/tps65086-regulator.txt.
+ - GPIO : ../gpio/gpio-tps65086.txt.
I'd suggest removing the full stops from all of the lines above.
Just treat them as bullet points like we normally do.
ACK
+Example:
+
+ pmic: tps65086@5e {
+ compatible = "ti,tps65086";
+ reg = <0x5e>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ compatible = "ti,tps65086-regulator";
+
+ buck1 {
+ regulator-name = "vcc1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1600000>;
+ regulator-boot-on;
+ ti,regulator-decay;
+ ti,regulator-step-size-25mv;
+ };
+ };
+
+ gpio4: tps65086_gpio {
+ compatible = "ti,tps65086-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
[...]
--
Andrew F. Davis
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/