[PATCH v2 09/10] hwmon: (fam15h_power) Add documentation for accumulated power algorithm

[Huang Rui]

This patch adds the description to explain the accumulated power
algorithm.

Signed-off-by: Huang Rui <ray.huang@xxxxxxx>
Cc: Borislav Petkov <bp@xxxxxxxxx>
Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
---
 Documentation/hwmon/fam15h_power | 46 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power
index 42bf04e..74cfbbf 100644
--- a/Documentation/hwmon/fam15h_power
+++ b/Documentation/hwmon/fam15h_power
@@ -45,3 +45,49 @@ This driver provides ProcessorPwrWatts and CurrPwrWatts:
 On multi-node processors the calculated value is for the entire
 package and not for a single node. Thus the driver creates sysfs
 attributes only for internal node0 of a multi-node processor.
+
+2) Accumulated Power Mechanism
+
+This driver also introduces an algorithm that should be used to
+calculate the average power consumed by a processor during a
+measurement interval Tm. The feature of accumulated power mechanism is
+indicated by CPUID Fn8000_0007_EDX[12].
+
+* Tsample: compute unit power accumulator sample period
+* Tref: the PTSC counter period
+* PTSC: performance timestamp counter
+* N: the ratio of compute unit power accumulator sample period to the
+  PTSC period
+* Jmax: max compute unit accumulated power which is indicated by
+  MaxCpuSwPwrAcc MSR C001007b
+* Jx/Jy: compute unit accumulated power which is indicated by
+  CpuSwPwrAcc MSR C001007a
+* Tx/Ty: the value of performance timestamp counter which is indicated
+  by CU_PTSC MSR C0010280
+* PwrCPUave: CPU average power
+
+i. Determine the ratio of Tsample to Tref by executing CPUID Fn8000_0007.
+	N = value of CPUID Fn8000_0007_ECX[CpuPwrSampleTimeRatio[15:0]].
+
+ii. Read the full range of the cumulative energy value from the new
+MSR MaxCpuSwPwrAcc.
+	Jmax = value returned.
+iii. At time x, SW reads CpuSwPwrAcc MSR and samples the PTSC.
+	Jx = value read from CpuSwPwrAcc and Tx = value read from
+PTSC.
+
+iv. At time y, SW reads CpuSwPwrAcc MSR and samples the PTSC.
+	Jy = value read from CpuSwPwrAcc and Ty = value read from
+PTSC.
+
+v. Calculate the average power consumption for a compute unit over
+time period (y-x). Unit of result is uWatt.
+	if (Jy < Jx) // Rollover has occurred
+		Jdelta = (Jy + Jmax) - Jx
+	else
+		Jdelta = Jy - Jx
+	PwrCPUave = N * Jdelta * 1000 / (Ty - Tx)
+
+This driver provides PwrCPUave and interval(default is 10 millisecond):
+* power1_average (PwrCPUave)
+* power1_average_interval (Interval)
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/