Re: [PATCH V2 1/3] Documentation for system mmu in hi6220 platform.
From: chenfeng
Date: Tue Oct 20 2015 - 08:34:51 EST
Mark, thanks very much.
On 2015/10/20 18:34, Mark Rutland wrote:
> On Tue, Oct 20, 2015 at 04:45:22PM +0800, Chen Feng wrote:
>> docs: iommu: Documentation for smmu in hi6220 SoC.
>>
>> Signed-off-by: Chen Feng <puck.chen@xxxxxxxxxxxxx>
>> Signed-off-by: Yu Dongbin <yudongbin@xxxxxxxxxxxxx>
>> ---
>> .../bindings/iommu/hisi,hi6220-iommu.txt | 52 ++++++++++++++++++++++
>> 1 file changed, 52 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt b/Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt
>> new file mode 100644
>> index 0000000..93e0701
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iommu/hisi,hi6220-iommu.txt
>> @@ -0,0 +1,52 @@
>> +Hi6220 SoC SMMU Device Driver devicetree document
>> +=======================================================================
>> +The Architecture of SMMU on Hi6220 SoC:
>> +
>> + +------------------------------------------------------------------+
>> + | |
>> + | +---------+ +--------+ +-------------+ +-------+ |
>> + | | ADE | | ISP | | V/J codec | | G3D | |
>> + | +----|----+ +---|----+ +------|------+ +---|---| |
>> + | | | | | |
>> + | ---------v-----------v--------------v--------------v----- |
>> + | Media Bus |
>> + | --------------------------------|---------------|-------- |
>> + | | | |
>> + | +---v---------------v--------+ |
>> + | | SMMU | |
>> + | +----------|---------|-------+ |
>> + | | | |
>> + +--------------------------------------------|---------|-----------+
>> + | |
>> + +------------v---------v-----------+
>> + | DDRC |
>> + +----------------------------------+
>> +
>> +Note:
>> +The media system shared the same smmu IP. to access DDR memory. And all
>
> Nit: s/IP./IP/
>
>> +media IP used the same page table.
>> +
>> +Below binding describes the system mmu for media system in hi6220 platform
>> +
>> +Required properties:
>> +- compatible: Should be "hisilicon,hi6220-smmu" example:
>> + compatible = "hisilicon,hi6220-smmu";
>
> No need for the example here.
>
> Just say:
>
> - compatible: should contain "hisilicon,hi6220-smmu".
>
ok,
>> +- reg: A tuple of base address and size of System MMU registers.
>> +- interrupts: An interrupt specifier for interrupt signal of System MMU.
>> +- clocks: The clock used for smmu IP.
>> +- clock-names: The name to enable clock with clock framework.
>
> The description of clocks and clock-names makes no sense.
>
> You must define the exact set of names you expect, and the relationship
> between clocks and clock names. e.g.
>
ok
> - clocks: a list of phandle + clock-specifier pairs, one for each entry
> in clock-names
>
> - clock-names: should contain:
> * "smmu_clk"
> * "media_sc_clk"
> * "smmu_peri_clk"
>
>> +- #iommu-cells: The iommu-cells should be 1 for muti-master to use.
>
> s/muti/multi/
>
> You must define what that one cell corresponds to in the hardware.
>
> Thanks,
> Mark.
>
I will change this next version.
>> +
>> +Examples:
>> + smmu@f4210000 {
>> + compatible = "hisilicon,hi6220-smmu";
>> + reg = <0x0 0xf4210000 0x0 0x1000>;
>> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&sys_ctrl HI6220_MMU_CLK>,
>> + <&media_ctrl HI6220_MED_MMU>,
>> + <&sys_ctrl HI6220_MEDIA_PLL_SRC>;
>> + clock-names = "smmu_clk",
>> + "media_sc_clk",
>> + "smmu_peri_clk";
>> + #iommu-cells = <1>;
>> + };
>> --
>> 1.9.1
>>
>
> .
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/