Re: [PATCH v3 2/3] mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan
From: Kishon Vijay Abraham I
Date: Tue Oct 20 2015 - 15:08:32 EST
Hi,
On Tuesday 20 October 2015 02:09 PM, Ulf Hansson wrote:
> + Kishon
>
> On 20 October 2015 at 09:05, Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> wrote:
>> This patch adds Generic PHY access for sdhci-of-arasan. Driver
>> can get PHY handler from dt-binding, and power-on/init the PHY.
>> Also we add pm ops for PHY here if CONFIG_PM_SLEEP is enabled.
>> Currently, it's just mandatory for arasan,sdhci-5.1.
>>
>> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
>>
>> Serise-changes: 3
>> - remove phy_init/exit for suspend/resume
>> - adjust phy_int/power_on seq to make code more reasonable
>> - simplify suspend/resume_phy
>>
>> Serise-changes: 2
>> - Keep phy as a mandatory requirement for arasan,sdhci-5.1
>>
>> ---
>>
>> Changes in v2: None
>>
>> drivers/mmc/host/sdhci-of-arasan.c | 87 ++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 87 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
>> index 75379cb..85bd0f9d 100644
>> --- a/drivers/mmc/host/sdhci-of-arasan.c
>> +++ b/drivers/mmc/host/sdhci-of-arasan.c
>> @@ -21,6 +21,7 @@
>>
>> #include <linux/module.h>
>> #include <linux/of_device.h>
>> +#include <linux/phy/phy.h>
>> #include "sdhci-pltfm.h"
>>
>> #define SDHCI_ARASAN_CLK_CTRL_OFFSET 0x2c
>> @@ -35,6 +36,7 @@
>> */
>> struct sdhci_arasan_data {
>> struct clk *clk_ahb;
>> + struct phy *phy;
>> };
>>
>> static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
>> @@ -70,6 +72,42 @@ static struct sdhci_pltfm_data sdhci_arasan_pdata = {
>>
>> #ifdef CONFIG_PM_SLEEP
>> /**
>> + * sdhci_arasan_suspend_phy - Suspend phy method for the driver
>> + * @phy: Handler of phy structure
>> + * Returns 0 on success and error value on error
>> + *
>> + * Put the phy in a deactive state.
>> + */
>> +static int sdhci_arasan_suspend_phy(struct phy *phy)
>> +{
>> + int ret = 0;
>> +
>> + ret = phy_power_off(phy);
>> + if (ret)
>
> This is an odd error handling, should you really do phy_power_on()?
right, if phy_power_off fails, it means the phy is still powered on.
This will also get reference counting wrong in the phy core.
Also phy_power_off can be invoked directly instead of having a separate
function to invoke it.
>
>> + phy_power_on(phy);
>> +
>> + return ret;
>> +}
>> +
>> +/**
>> + * sdhci_arasan_resume_phy - Resume phy method for the driver
>> + * @phy: Handler of phy structure
>> + * Returns 0 on success and error value on error
>> + *
>> + * Put the phy in a active state.
>> + */
>> +static int sdhci_arasan_resume_phy(struct phy *phy)
>> +{
>> + int ret = 0;
>> +
>> + ret = phy_power_on(phy);
>> + if (ret)
>
> Similar comment as above.
use phy_power_on directly.
>
>> + phy_power_off(phy);
>> +
>> + return ret;
>> +}
>> +
>> +/**
>> * sdhci_arasan_suspend - Suspend method for the driver
>> * @dev: Address of the device structure
>> * Returns 0 on success and error value on error
>> @@ -88,6 +126,15 @@ static int sdhci_arasan_suspend(struct device *dev)
>> if (ret)
>> return ret;
>>
>> + if (!IS_ERR(sdhci_arasan->phy)) {
you can make this an optional PHY and then you don't have to check error
every time you use PHY API's.
>> + ret = sdhci_arasan_suspend_phy(sdhci_arasan->phy);
>> + if (ret) {
>> + dev_err(dev, "Cannot suspend phy.\n");
>> + sdhci_resume_host(host);
>
> This is an odd error handling, why do sdhci_resume_host()?
right, this will result in multiple power_on's to be invoked.
>
>> + return ret;
>> + }
>> + }
>> +
>> clk_disable(pltfm_host->clk);
>> clk_disable(sdhci_arasan->clk_ahb);
>>
>> @@ -122,6 +169,16 @@ static int sdhci_arasan_resume(struct device *dev)
>> return ret;
>> }
>>
>> + if (!IS_ERR(sdhci_arasan->phy)) {
same here.
>> + ret = sdhci_arasan_resume_phy(sdhci_arasan->phy);
>> + if (ret) {
>> + dev_err(dev, "Cannot resume phy.\n");
>> + clk_disable(sdhci_arasan->clk_ahb);
>> + clk_disable(pltfm_host->clk);
>> + return ret;
>
> The error handling is starting to be a bit complex in
> sdhci_arasan_resume(), perhaps it's time to add some labels to make
> the code more readable?
>
>> + }
>> + }
>> +
>> return sdhci_resume_host(host);
>> }
>> #endif /* ! CONFIG_PM_SLEEP */
>> @@ -166,6 +223,33 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
>> goto clk_dis_ahb;
>> }
>>
>> + sdhci_arasan->phy = NULL;
>
> NULL isn't an error. You probably want something like:
> sdhci_arasan->phy = ERR_PTR(-ENODEV);
>
> Although, I just realize that the phy API works a bit differently than
> other APIs. More precisely, instead of returning an error while you
> provide a NULL pointer to the APIs, it will treat it as a NOOP and
> return a non-error code (at least according to the documentation). I
> don't know why the phy API is different, but to me I prefer to use the
> regular kernel style and thus, please adopt to my suggestion above.
So with optional PHY's, the phy core API will return NULL, if it's not
able to get the PHY (i.e if the ERR is ENODEV). So there don't have to
be error checking in the driver before invoking PHY APIs.
>
>> + if (of_device_is_compatible(pdev->dev.of_node,
>> + "arasan,sdhci-5.1")) {
>> + sdhci_arasan->phy = devm_phy_get(&pdev->dev,
>> + "phy_arasan");
oh.. so it's not an optional PHY. I think then initializing phy to NULL
above is okay IMO.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/