[PATCH 3.19.y-ckt 068/156] PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI

[Kamal Mostafa]

3.19.8-ckt8 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Rui <rui.zhang@xxxxxxxxx>

commit 91f15fb30c77d4a0d0d9b97e5cec647650853145 upstream.

On multi-function JMicron SATA/PATA/AHCI devices, the PATA controller at
function 1 doesn't work if it is powered on before the SATA controller at
function 0.  The result is that PATA doesn't work after resume, and we
print messages like this:

  pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3
  irq 17: nobody cared (try booting with the "irqpoll" option)

Async resume was introduced in v3.15 by 76569faa62c4 ("PM / sleep:
Asynchronous threads for resume_noirq").  Prior to that, we powered on
the functions in order, so this problem shouldn't happen.

e6b7e41cdd8c ("ata: Disabling the async PM for JMicron chip 363/361")
solved the problem for JMicron 361 and 363 devices.  With async suspend
disabled, we always power on function 0 before function 1.

Barto then reported the same problem with a JMicron 368 (see comment #57 in
the bugzilla).

Rather than extending the blacklist piecemeal, disable async suspend for
all JMicron multi-function SATA/PATA/AHCI devices.

This quirk could stay in the ahci and pata_jmicron drivers, but it's likely
the problem will occur even if pata_jmicron isn't loaded until after the
suspend/resume.  Making it a PCI quirk ensures that we'll preserve the
power-on order even if the drivers aren't loaded.

[bhelgaas: changelog, limit to multi-function, limit to IDE/ATA]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=81551
Reported-and-tested-by: Barto <mister.freeman@xxxxxxxxxxx>
Signed-off-by: Zhang Rui <rui.zhang@xxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

Signed-off-by: Kamal Mostafa <kamal@xxxxxxxxxxxxx>
---
 drivers/ata/ahci.c         | 13 +------------
 drivers/ata/pata_jmicron.c | 12 ------------
 drivers/pci/quirks.c       | 12 ++++++++++++
 3 files changed, 13 insertions(+), 24 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index adce56f..c4ccf51 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -349,6 +349,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	/* JMicron 362B and 362C have an AHCI function with IDE class code */
 	{ PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
 	{ PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
+	/* May need to update quirk_jmicron_async_suspend() for additions */
 
 	/* ATI */
 	{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
@@ -1377,18 +1378,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000)
 		ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS;
 
-	/*
-	 * The JMicron chip 361/363 contains one SATA controller and one
-	 * PATA controller,for powering on these both controllers, we must
-	 * follow the sequence one by one, otherwise one of them can not be
-	 * powered on successfully, so here we disable the async suspend
-	 * method for these chips.
-	 */
-	if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
-		(pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
-		pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
-		device_disable_async_suspend(&pdev->dev);
-
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 47e418b..4d1a5d2 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -143,18 +143,6 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
-	/*
-	 * The JMicron chip 361/363 contains one SATA controller and one
-	 * PATA controller,for powering on these both controllers, we must
-	 * follow the sequence one by one, otherwise one of them can not be
-	 * powered on successfully, so here we disable the async suspend
-	 * method for these chips.
-	 */
-	if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
-		(pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
-		pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
-		device_disable_async_suspend(&pdev->dev);
-
 	return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
 }
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index cfa0f20..67dff79 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1576,6 +1576,18 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB3
 
 #endif
 
+static void quirk_jmicron_async_suspend(struct pci_dev *dev)
+{
+	if (dev->multifunction) {
+		device_disable_async_suspend(&dev->dev);
+		dev_info(&dev->dev, "async suspend disabled to avoid multi-function power-on ordering issue\n");
+	}
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend);
+
 #ifdef CONFIG_X86_IO_APIC
 static void quirk_alder_ioapic(struct pci_dev *pdev)
 {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/