[PATCH v3] extcon: gpio: Add the support for Device tree bindings
From: Chanwoo Choi
Date: Wed Oct 21 2015 - 00:37:49 EST
This patch adds the support for Device tree bindings of extcon-gpio driver.
The extcon-gpio device tree node must include the both 'extcon-id' and
'extcon-gpio' property.
For exmaple:
usb_cable: extcon-gpio-0 {
compatible = "extcon-gpio";
extcon-id = <EXTCON_USB>;
extcon-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
}
ta_cable: extcon-gpio-1 {
compatible = "extcon-gpio";
extcon-id = <EXTCON_CHG_USB_DCP>;
extcon-gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
debounce-ms = <50>; /* 50 millisecond */
wakeup-source;
}
&dwc3_usb {
extcon = <&usb_cable>;
};
&charger {
extcon = <&ta_cable>;
};
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Signed-off-by: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
---
Changes from v2:
- Add the more description for 'extcon-id' property in documentation
Changes from v1:
- Create the include/dt-bindings/extcon/extcon.h including the identification
of external connector. These definitions are used in dts file.
- Fix error if CONFIG_OF is disabled.
- Add signed-off tag by Myungjoo Ham
.../devicetree/bindings/extcon/extcon-gpio.txt | 43 ++++++++
drivers/extcon/extcon-gpio.c | 116 ++++++++++++++++-----
include/dt-bindings/extcon/extcon.h | 47 +++++++++
include/linux/extcon/extcon-gpio.h | 8 +-
4 files changed, 184 insertions(+), 30 deletions(-)
create mode 100644 Documentation/devicetree/bindings/extcon/extcon-gpio.txt
create mode 100644 include/dt-bindings/extcon/extcon.h
diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
new file mode 100644
index 000000000000..1e011f9c8536
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
@@ -0,0 +1,43 @@
+GPIO Extcon device
+
+This is a virtual device used to generate the specific cable states from the
+GPIO pin.
+
+Required properties:
+- compatible: Must be "extcon-gpio".
+- extcon-id: The extcon support the various type of external connector to check
+ whether connector is attached or detached. The each external connector has
+ the unique number to identify it. So this property includes the unique number
+ which indicates the specific external connector. When external connector is
+ attached or detached, GPIO pin detect the changed state. See include/
+ dt-bindings/extcon/extcon.h which defines the unique number for supported
+ external connector from extcon framework.
+- extcon-gpio: GPIO pin to detect the external connector. See gpio binding.
+
+Optional properties:
+- debounce-ms: the debounce dealy for GPIO pin in millisecond.
+- wakeup-source: Boolean, extcon can wake-up the system.
+
+Example: Examples of extcon-gpio node as listed below:
+
+ usb_cable: extcon-gpio-0 {
+ compatible = "extcon-gpio";
+ extcon-id = <EXTCON_USB>;
+ extcon-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+ }
+
+ ta_cable: extcon-gpio-1 {
+ compatible = "extcon-gpio";
+ extcon-id = <EXTCON_CHG_USB_DCP>;
+ extcon-gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ debounce-ms = <50>; /* 50 millisecond */
+ wakeup-source;
+ }
+
+ &dwc3_usb {
+ extcon = <&usb_cable>;
+ };
+
+ &charger {
+ extcon = <&ta_cable>;
+ };
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 279ff8f6637d..69b560d136cd 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -1,11 +1,9 @@
/*
* extcon_gpio.c - Single-state GPIO extcon driver based on extcon class
*
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@xxxxxxxxxxx>
- *
- * Modified by MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx> to support extcon
- * (originally switch class is supported)
+ * Copyright (C) 2015 Chanwoo Choi <cw00.choi@xxxxxxxxxxx>, Samsung Electronics
+ * Copyright (C) 2012 MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>, Samsung Electronics
+ * Copyright (C) 2008 Mike Lockwood <lockwood@xxxxxxxxxxx>, Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -26,12 +24,14 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
struct gpio_extcon_data {
struct extcon_dev *edev;
int irq;
+ bool irq_wakeup;
struct delayed_work work;
unsigned long debounce_jiffies;
@@ -49,7 +49,7 @@ static void gpio_extcon_work(struct work_struct *work)
state = gpiod_get_value_cansleep(data->id_gpiod);
if (data->pdata->gpio_active_low)
state = !state;
- extcon_set_state(data->edev, state);
+ extcon_set_cable_state_(data->edev, data->pdata->extcon_id, state);
}
static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
@@ -61,19 +61,50 @@ static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int gpio_extcon_init(struct device *dev, struct gpio_extcon_data *data)
+static int gpio_extcon_parse_of(struct device *dev,
+ struct gpio_extcon_data *data)
{
- struct gpio_extcon_pdata *pdata = data->pdata;
+ struct gpio_extcon_pdata *pdata;
int ret;
- ret = devm_gpio_request_one(dev, pdata->gpio, GPIOF_DIR_IN,
- dev_name(dev));
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ ret = device_property_read_u32(dev, "extcon-id", &pdata->extcon_id);
+ if (ret < 0)
+ return -EINVAL;
+
+ data->id_gpiod = devm_gpiod_get(dev, "extcon", GPIOD_IN);
if (ret < 0)
return ret;
- data->id_gpiod = gpio_to_desc(pdata->gpio);
- if (!data->id_gpiod)
- return -EINVAL;
+ data->irq_wakeup = device_property_read_bool(dev, "wakeup-source");
+
+ device_property_read_u32(dev, "debounce-ms", &pdata->debounce);
+
+ pdata->irq_flags = (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
+ | IRQF_ONESHOT);
+
+ data->pdata = pdata;
+ return 0;
+}
+
+static int gpio_extcon_init(struct device *dev, struct gpio_extcon_data *data)
+{
+ struct gpio_extcon_pdata *pdata = data->pdata;
+ int ret;
+
+ if (!data->id_gpiod) {
+ ret = devm_gpio_request_one(dev, pdata->gpio, GPIOF_DIR_IN,
+ dev_name(dev));
+ if (ret < 0)
+ return ret;
+
+ data->id_gpiod = gpio_to_desc(pdata->gpio);
+ if (!data->id_gpiod)
+ return -EINVAL;
+ }
if (pdata->debounce) {
ret = gpiod_set_debounce(data->id_gpiod,
@@ -96,16 +127,20 @@ static int gpio_extcon_probe(struct platform_device *pdev)
struct gpio_extcon_data *data;
int ret;
- if (!pdata)
- return -EBUSY;
- if (!pdata->irq_flags || pdata->extcon_id > EXTCON_NONE)
- return -EINVAL;
-
- data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
- GFP_KERNEL);
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- data->pdata = pdata;
+
+ if (!pdata) {
+ ret = gpio_extcon_parse_of(&pdev->dev, data);
+ if (ret < 0)
+ return ret;
+ } else {
+ data->pdata = pdata;
+ }
+
+ if (!data->pdata->irq_flags || data->pdata->extcon_id == EXTCON_NONE)
+ return -EINVAL;
/* Initialize the gpio */
ret = gpio_extcon_init(&pdev->dev, data);
@@ -113,7 +148,8 @@ static int gpio_extcon_probe(struct platform_device *pdev)
return ret;
/* Allocate the memory of extcon devie and register extcon device */
- data->edev = devm_extcon_dev_allocate(&pdev->dev, &pdata->extcon_id);
+ data->edev = devm_extcon_dev_allocate(&pdev->dev,
+ &data->pdata->extcon_id);
if (IS_ERR(data->edev)) {
dev_err(&pdev->dev, "failed to allocate extcon device\n");
return -ENOMEM;
@@ -130,7 +166,8 @@ static int gpio_extcon_probe(struct platform_device *pdev)
* is attached or detached.
*/
ret = devm_request_any_context_irq(&pdev->dev, data->irq,
- gpio_irq_handler, pdata->irq_flags,
+ gpio_irq_handler,
+ data->pdata->irq_flags,
pdev->name, data);
if (ret < 0)
return ret;
@@ -139,6 +176,8 @@ static int gpio_extcon_probe(struct platform_device *pdev)
/* Perform initial detection */
gpio_extcon_work(&data->work.work);
+ device_init_wakeup(&pdev->dev, data->irq_wakeup);
+
return 0;
}
@@ -152,11 +191,23 @@ static int gpio_extcon_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM_SLEEP
+static int gpio_extcon_suspend(struct device *dev)
+{
+ struct gpio_extcon_data *data = dev_get_drvdata(dev);
+
+ if (data->irq_wakeup)
+ enable_irq_wake(data->irq);
+
+ return 0;
+}
+
static int gpio_extcon_resume(struct device *dev)
{
- struct gpio_extcon_data *data;
+ struct gpio_extcon_data *data = dev_get_drvdata(dev);
+
+ if (data->irq_wakeup)
+ disable_irq_wake(data->irq);
- data = dev_get_drvdata(dev);
if (data->pdata->check_on_resume)
queue_delayed_work(system_power_efficient_wq,
&data->work, data->debounce_jiffies);
@@ -165,7 +216,18 @@ static int gpio_extcon_resume(struct device *dev)
}
#endif
-static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume);
+#if defined(CONFIG_OF)
+static const struct of_device_id gpio_extcon_of_match[] = {
+ { .compatible = "extcon-gpio", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, gpio_extcon_of_match);
+#else
+#define gpio_extcon_of_match NULL
+#endif
+
+static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops,
+ gpio_extcon_suspend, gpio_extcon_resume);
static struct platform_driver gpio_extcon_driver = {
.probe = gpio_extcon_probe,
@@ -173,11 +235,13 @@ static struct platform_driver gpio_extcon_driver = {
.driver = {
.name = "extcon-gpio",
.pm = &gpio_extcon_pm_ops,
+ .of_match_table = gpio_extcon_of_match,
},
};
module_platform_driver(gpio_extcon_driver);
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@xxxxxxxxxxx>");
MODULE_AUTHOR("Mike Lockwood <lockwood@xxxxxxxxxxx>");
MODULE_DESCRIPTION("GPIO extcon driver");
MODULE_LICENSE("GPL");
diff --git a/include/dt-bindings/extcon/extcon.h b/include/dt-bindings/extcon/extcon.h
new file mode 100644
index 000000000000..dbba5886cc8c
--- /dev/null
+++ b/include/dt-bindings/extcon/extcon.h
@@ -0,0 +1,47 @@
+/*
+ * This header provides constants for most extcon bindings.
+ *
+ * Most extcon bindings include the unique identification format.
+ * In most cases, the unique id format uses the standard values/macro
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_EXTCON_EXTCON_H
+#define _DT_BINDINGS_EXTCON_EXTCON_H
+
+/* USB external connector */
+#define EXTCON_USB 1
+#define EXTCON_USB_HOST 2
+
+/* Charging external connector */
+#define EXTCON_CHG_USB_SDP 5 /* Standard Downstream Port */
+#define EXTCON_CHG_USB_DCP 6 /* Dedicated Charging Port */
+#define EXTCON_CHG_USB_CDP 7 /* Charging Downstream Port */
+#define EXTCON_CHG_USB_ACA 8 /* Accessory Charger Adapter */
+#define EXTCON_CHG_USB_FAST 9
+#define EXTCON_CHG_USB_SLOW 10
+
+/* Jack external connector */
+#define EXTCON_JACK_MICROPHONE 20
+#define EXTCON_JACK_HEADPHONE 21
+#define EXTCON_JACK_LINE_IN 22
+#define EXTCON_JACK_LINE_OUT 23
+#define EXTCON_JACK_VIDEO_IN 24
+#define EXTCON_JACK_VIDEO_OUT 25
+#define EXTCON_JACK_SPDIF_IN 26 /* Sony Philips Digital InterFace */
+#define EXTCON_JACK_SPDIF_OUT 27
+
+/* Display external connector */
+#define EXTCON_DISP_HDMI 40 /* High-Definition Multimedia Interface */
+#define EXTCON_DISP_MHL 41 /* Mobile High-Definition Link */
+#define EXTCON_DISP_DVI 42 /* Digital Visual Interface */
+#define EXTCON_DISP_VGA 43 /* Video Graphics Array */
+
+/* Miscellaneous external connector */
+#define EXTCON_DOCK 60
+#define EXTCON_JIG 61
+#define EXTCON_MECHANICAL 62
+
+#define EXTCON_NUM 63
+
+#endif /* _DT_BINDINGS_EXTCON_EXTCON_H */
diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
index 7cacafb78b09..416c2adad7fb 100644
--- a/include/linux/extcon/extcon-gpio.h
+++ b/include/linux/extcon/extcon-gpio.h
@@ -1,8 +1,8 @@
/*
* Single-state GPIO extcon driver based on extcon class
*
- * Copyright (C) 2012 Samsung Electronics
- * Author: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
+ * Copyright (C) 2015 Chanwoo Choi <cw00.choi@xxxxxxxxxxx>, Samsung Electronics
+ * Copyright (C) 2012 MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>, Samsung Electronics
*
* based on switch class driver
* Copyright (C) 2008 Google, Inc.
@@ -35,10 +35,10 @@
* while resuming from sleep.
*/
struct gpio_extcon_pdata {
- unsigned int extcon_id;
+ u32 extcon_id;
unsigned gpio;
bool gpio_active_low;
- unsigned long debounce;
+ u32 debounce;
unsigned long irq_flags;
bool check_on_resume;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/