Re: [RESEND PATCH 0/9] eeprom: at24: at24cs series serial number read

From: Peter Korsgaard
Date: Wed Oct 21 2015 - 07:03:44 EST


>>>>> "Bartosz" == Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> writes:

> Chips from the at24cs EEPROM series have an additional read-only memory area
> containing a factory pre-programmed serial number. In order to access it, a
> dummy write must be executed before reading the serial number bytes.

> This series adds support for reading the serial number through a sysfs
> attribute.

> While we're at it: some of the patches contain readability tweaks and code
> organization fixes.

> Tested with at24cs64 and at24cs02 chips (for both 16 and 8 bit address
> pointers).

As the serial number is available on a separate i2c address, wouldn't
it be simpler to handle these as special (read only) device variants and
instantiate E.G. a 24c64 (for the normal data) and a 24cs64 (for the
serial)?

--
Bye, Peter Korsgaard
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/