Re: [PATCH v2 2/2] serial: earlycon: allow to specify uartclk in earlycon kernel-parameter

[Peter Hurley]

On 10/20/2015 09:20 PM, Masahiro Yamada wrote:
> Hi Peter,
> (+ Rob Herring, Stefan Agner)
> 
> 2015-10-20 23:00 GMT+09:00 Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>:
>> On 10/19/2015 11:36 PM, Masahiro Yamada wrote:
>>> The input clock frequency varies from device to device, but the
>>> earlycon uses the fixed frequency (BASE_BAUD * 16).  It makes
>>> impossible to set the correct divisor to the register.
>>
>> So the bootloader hasn't setup the serial port?
> 
> It does.
> I use U-boot and the serial port is already set up by U-boot.
> 
> 
> But, earlycon setup functions update hardware registers.
> See  early_serial8250_setup(), ingenic_early_console_setup(), etc.
> 
> 
> Without port->uartclk set to a valid value,
> the init code in earlycon setup does not make sense.
> 
> 
> What I want to clarify is,
> what should we do in the earlycon setup function?
> 
> Currently, I see
>  [1] set device->con->write callback
>  [2] initialize UART port registers
> 
> 
> For [2], we need to know baudrate and input clock frequency.
> (and the latter is missing, that's why my patch is here.)
> 
> 
> In order to be independent of a boot loader, we also need
>   [3]  pinctrl (pin-muxing)
> 
> But, it is difficult to handle pinctrl in the earlycon framework.
> 
> 
> If we depend on a boot loader, [2] is meaningless.   [1] is enough.

The 8250 earlycon doesn't try to initialize the hardware (other than
masking interrupts) if the baud rate is uninitialized
(!device->baud in early_serial8250_setup()).

Rather than initializing the h/w to a default of 115200 in
ingenic_early_console_setup() when device->baud == 0, it should just
mask interrupts. That way the bootloader initialization will be
preserved when the options are unspecified on the command line, such as:

	earlycon=jz4740_uart,mmio32,0x43fb0000


Regards,
Peter Hurley

PS - Apologies for not reviewing the Ingenic 8250 driver at submission
time.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/