Re: [PATCH 10/11] Documentation: Rename gpio controller name from cygnus to iproc

[Rob Herring]

On Mon, Oct 19, 2015 at 12:43 AM, Pramod Kumar <pramodku@xxxxxxxxxxxx> wrote:
> Renamed gpio controller's driver name from cygnus to iproc to make it
> more generic so that all iProc based SoCs having the same gpio controller
> could use this.
>
> Signed-off-by: Pramod Kumar <pramodku@xxxxxxxxxxxx>
> Reviewed-by: Ray Jui <rjui@xxxxxxxxxxxx>
> Reviewed-by: Scott Branden <sbranden@xxxxxxxxxxxx>

Acked-by: Rob Herring <robh@xxxxxxxxxx>

> ---
>  .../bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt}    | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>  rename Documentation/devicetree/bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt} (97%)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> similarity index 97%
> rename from Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> rename to Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> index 655a8d7..7fb4621 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> @@ -1,4 +1,4 @@
> -Broadcom Cygnus GPIO/PINCONF Controller
> +Broadcom iProc GPIO/PINCONF Controller
>
>  Required properties:
>
> @@ -7,7 +7,7 @@ Required properties:
>  "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
>
>  - reg:
> -    Define the base and range of the I/O address space that contains the Cygnus
> +    Define the base and range of the I/O address space that contains SoC
>  GPIO/PINCONF controller registers
>
>  - ngpios:
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/