Re: [PATCH 2/2] i2c: designware: enable High-speed mode for pcidrv

[Wolfram Sang]

> > Should it (ACPI walk) be done in PCI case as well? If so, then it needs
> > to be done up to i2c-core. There you may adjust the bus speed whenever
> > slave device is enumerated.
> >
> I think the "ACPI walk for bus speed" also works for PCI case. It'll
> be good to do this in i2c-core.
> By doing this we can get a minimum device speed for this bus. I2C bus
> drivers can use this speed to set corresponding mode into i2c
> controller.
> Waiting for comments from others.
> 
> > For PCI case you have still to have hardcoded values and it should be
> > maximum supported by the bus I think. When you have implemented above
> > algorithm you may do this safely. Am I missing something?
> Agree. It'll be safer to set a hardcoded maximum supported speed of
> the bus for PCI case.
> I2C bus driver can use MIN(speed_get_by_ACPI_walk,
> hardcoded_max_supported_speed) for bus speed.

Do I read this correctly that you agreed on an alternative path so this
series can be discarded?

Attachment: signature.asc
Description: Digital signature