[PATCH 4/4] net: thunderx: Incorporate pass2 silicon CPI index configuration changes

From: David Daney
Date: Fri Oct 23 2015 - 20:14:32 EST


From: Thanneeru Srinivasulu <tsrinivasulu@xxxxxxxxxxxxxxxxxx>

Add support for ThunderX pass2 CPI and MPI configuration changes.
MPI_ALG is not enabled i.e MCAM parsing is disabled.

Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Sunil Goutham <sgoutham@xxxxxxxxxx>
Signed-off-by: David Daney <david.daney@xxxxxxxxxx>
---
drivers/net/ethernet/cavium/thunder/nic_main.c | 29 ++++++++++++++++++++------
drivers/net/ethernet/cavium/thunder/nic_reg.h | 4 ++++
2 files changed, 27 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c
index 52e1acb..c561fdc 100644
--- a/drivers/net/ethernet/cavium/thunder/nic_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nic_main.c
@@ -43,6 +43,7 @@ struct nicpf {
u8 duplex[MAX_LMAC];
u32 speed[MAX_LMAC];
u16 cpi_base[MAX_NUM_VFS_SUPPORTED];
+ u16 rssi_base[MAX_NUM_VFS_SUPPORTED];
u16 rss_ind_tbl_size;
bool mbx_lock[MAX_NUM_VFS_SUPPORTED];

@@ -396,8 +397,18 @@ static void nic_config_cpi(struct nicpf *nic, struct cpi_cfg_msg *cfg)
padd = cpi % 8; /* 3 bits CS out of 6bits DSCP */

/* Leave RSS_SIZE as '0' to disable RSS */
- nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi << 3),
- (vnic << 24) | (padd << 16) | (rssi_base + rssi));
+ if (pass1_silicon(nic)) {
+ nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi << 3),
+ (vnic << 24) | (padd << 16) |
+ (rssi_base + rssi));
+ } else {
+ /* Set MPI_ALG to '0' to disable MCAM parsing */
+ nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi << 3),
+ (padd << 16));
+ /* MPI index is same as CPI if MPI_ALG is not enabled */
+ nic_reg_write(nic, NIC_PF_MPI_0_2047_CFG | (cpi << 3),
+ (vnic << 24) | (rssi_base + rssi));
+ }

if ((rssi + 1) >= cfg->rq_cnt)
continue;
@@ -410,6 +421,7 @@ static void nic_config_cpi(struct nicpf *nic, struct cpi_cfg_msg *cfg)
rssi = ((cpi - cpi_base) & 0x38) >> 3;
}
nic->cpi_base[cfg->vf_id] = cpi_base;
+ nic->rssi_base[cfg->vf_id] = rssi_base;
}

/* Responsds to VF with its RSS indirection table size */
@@ -435,10 +447,9 @@ static void nic_config_rss(struct nicpf *nic, struct rss_cfg_msg *cfg)
{
u8 qset, idx = 0;
u64 cpi_cfg, cpi_base, rssi_base, rssi;
+ u64 idx_addr;

- cpi_base = nic->cpi_base[cfg->vf_id];
- cpi_cfg = nic_reg_read(nic, NIC_PF_CPI_0_2047_CFG | (cpi_base << 3));
- rssi_base = (cpi_cfg & 0x0FFF) + cfg->tbl_offset;
+ rssi_base = nic->rssi_base[cfg->vf_id] + cfg->tbl_offset;

rssi = rssi_base;
qset = cfg->vf_id;
@@ -455,9 +466,15 @@ static void nic_config_rss(struct nicpf *nic, struct rss_cfg_msg *cfg)
idx++;
}

+ cpi_base = nic->cpi_base[cfg->vf_id];
+ if (pass1_silicon(nic))
+ idx_addr = NIC_PF_CPI_0_2047_CFG;
+ else
+ idx_addr = NIC_PF_MPI_0_2047_CFG;
+ cpi_cfg = nic_reg_read(nic, idx_addr | (cpi_base << 3));
cpi_cfg &= ~(0xFULL << 20);
cpi_cfg |= (cfg->hash_bits << 20);
- nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi_base << 3), cpi_cfg);
+ nic_reg_write(nic, idx_addr | (cpi_base << 3), cpi_cfg);
}

/* 4 level transmit side scheduler configutation
diff --git a/drivers/net/ethernet/cavium/thunder/nic_reg.h b/drivers/net/ethernet/cavium/thunder/nic_reg.h
index 58197bb..dd536be 100644
--- a/drivers/net/ethernet/cavium/thunder/nic_reg.h
+++ b/drivers/net/ethernet/cavium/thunder/nic_reg.h
@@ -85,7 +85,11 @@
#define NIC_PF_ECC3_DBE_INT_W1S (0x2708)
#define NIC_PF_ECC3_DBE_ENA_W1C (0x2710)
#define NIC_PF_ECC3_DBE_ENA_W1S (0x2718)
+#define NIC_PF_MCAM_0_191_ENA (0x100000)
+#define NIC_PF_MCAM_0_191_M_0_5_DATA (0x110000)
+#define NIC_PF_MCAM_CTRL (0x120000)
#define NIC_PF_CPI_0_2047_CFG (0x200000)
+#define NIC_PF_MPI_0_2047_CFG (0x210000)
#define NIC_PF_RSSI_0_4097_RQ (0x220000)
#define NIC_PF_LMAC_0_7_CFG (0x240000)
#define NIC_PF_LMAC_0_7_SW_XOFF (0x242000)
--
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/