This fixes the function e1000_change_mtu to properly check and run
the error code by e1000e_up as this function can fail and the error
code should be returned to the caller of the function e1000_change_mtu
to signal a error has occurred when calling this particular function
Signed-off-by: Nicholas Krause <xerofoify@xxxxxxxxx>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index faf4b3f..aebccb1 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5931,6 +5931,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
int max_frame = new_mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+ int err = 0;
/* Jumbo frame support */
if ((max_frame > (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)) &&
@@ -5984,7 +5985,9 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
adapter->rx_buffer_len = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN;
if (netif_running(netdev))
- e1000e_up(adapter);
+ err = e1000e_up(adapter);
+ if (err)
+ e_err("Failed to successfully bring up this adapter\n");
else
e1000e_reset(adapter);
@@ -5992,7 +5995,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
clear_bit(__E1000_RESETTING, &adapter->state);
- return 0;
+ return err;
}
static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,