Re: [PATCH] iio: Move IIO Dummy Driver out of staging

From: Jonathan Cameron
Date: Sun Oct 25 2015 - 08:34:04 EST

Next message: Jonathan Cameron: "Re: [PATCH 1/2] iio: adc: mcp320x: Deprecated compatible strings with no vendor prefix"
Previous message: Oleg Nesterov: "Re: + signal-turn-dequeue_signal_lock-into-kernel_dequeue_signal.patch added to -mm tree"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 09/10/15 14:31, Cristina Opriceana wrote:
> This patch moves the reference IIO dummy driver from drivers/staging/iio
> into a separate folder, drivers/iio/dummy and adds the proper Kconfig
> and Makefile for it.
>
> A new config menu entry called IIO dummy driver has also been added
> in the Industrial I/O support menu, corresponding to this driver.
>
> Signed-off-by: Cristina Opriceana <cristina.opriceana@xxxxxxxxx>
Applied to the togreg branch of iio.git - pushed out as testing.
Note that there is a build fix in the fixes-togreg branch which
might cause some fun later. Ah well.

Jonathan
> ---
> drivers/iio/Kconfig | 1 +
> drivers/iio/Makefile | 1 +
> drivers/iio/dummy/Kconfig | 35 ++
> drivers/iio/dummy/Makefile | 10 +
> drivers/iio/dummy/iio_dummy_evgen.c | 262 +++++++++
> drivers/iio/dummy/iio_dummy_evgen.h | 13 +
> drivers/iio/dummy/iio_simple_dummy.c | 748 ++++++++++++++++++++++++++
> drivers/iio/dummy/iio_simple_dummy.h | 129 +++++
> drivers/iio/dummy/iio_simple_dummy_buffer.c | 192 +++++++
> drivers/iio/dummy/iio_simple_dummy_events.c | 276 ++++++++++
> drivers/staging/iio/Kconfig | 54 +-
> drivers/staging/iio/Makefile | 10 +-
> drivers/staging/iio/iio_dummy_evgen.c | 262 ---------
> drivers/staging/iio/iio_dummy_evgen.h | 13 -
> drivers/staging/iio/iio_simple_dummy.c | 748 --------------------------
> drivers/staging/iio/iio_simple_dummy.h | 129 -----
> drivers/staging/iio/iio_simple_dummy_buffer.c | 192 -------
> drivers/staging/iio/iio_simple_dummy_events.c | 276 ----------
> 18 files changed, 1699 insertions(+), 1652 deletions(-)
> create mode 100644 drivers/iio/dummy/Kconfig
> create mode 100644 drivers/iio/dummy/Makefile
> create mode 100644 drivers/iio/dummy/iio_dummy_evgen.c
> create mode 100644 drivers/iio/dummy/iio_dummy_evgen.h
> create mode 100644 drivers/iio/dummy/iio_simple_dummy.c
> create mode 100644 drivers/iio/dummy/iio_simple_dummy.h
> create mode 100644 drivers/iio/dummy/iio_simple_dummy_buffer.c
> create mode 100644 drivers/iio/dummy/iio_simple_dummy_events.c
> delete mode 100644 drivers/staging/iio/iio_dummy_evgen.c
> delete mode 100644 drivers/staging/iio/iio_dummy_evgen.h
> delete mode 100644 drivers/staging/iio/iio_simple_dummy.c
> delete mode 100644 drivers/staging/iio/iio_simple_dummy.h
> delete mode 100644 drivers/staging/iio/iio_simple_dummy_buffer.c
> delete mode 100644 drivers/staging/iio/iio_simple_dummy_events.c
>
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index 66792e7..6b8c77c9 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -50,6 +50,7 @@ source "drivers/iio/amplifiers/Kconfig"
> source "drivers/iio/chemical/Kconfig"
> source "drivers/iio/common/Kconfig"
> source "drivers/iio/dac/Kconfig"
> +source "drivers/iio/dummy/Kconfig"
> source "drivers/iio/frequency/Kconfig"
> source "drivers/iio/gyro/Kconfig"
> source "drivers/iio/humidity/Kconfig"
> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
> index aeca726..6769f2f 100644
> --- a/drivers/iio/Makefile
> +++ b/drivers/iio/Makefile
> @@ -16,6 +16,7 @@ obj-y += buffer/
> obj-y += chemical/
> obj-y += common/
> obj-y += dac/
> +obj-y += dummy/
> obj-y += gyro/
> obj-y += frequency/
> obj-y += humidity/
> diff --git a/drivers/iio/dummy/Kconfig b/drivers/iio/dummy/Kconfig
> new file mode 100644
> index 0000000..e8676aa
> --- /dev/null
> +++ b/drivers/iio/dummy/Kconfig
> @@ -0,0 +1,35 @@
> +#
> +# Industrial I/O subsystem Dummy Driver configuration
> +#
> +menu "IIO dummy driver"
> + depends on IIO
> +
> +config IIO_DUMMY_EVGEN
> + tristate
> +
> +config IIO_SIMPLE_DUMMY
> + tristate "An example driver with no hardware requirements"
> + help
> + Driver intended mainly as documentation for how to write
> + a driver. May also be useful for testing userspace code
> + without hardware.
> +
> +if IIO_SIMPLE_DUMMY
> +
> +config IIO_SIMPLE_DUMMY_EVENTS
> + bool "Event generation support"
> + select IIO_DUMMY_EVGEN
> + help
> + Add some dummy events to the simple dummy driver.
> +
> +config IIO_SIMPLE_DUMMY_BUFFER
> + bool "Buffered capture support"
> + select IIO_BUFFER
> + select IIO_TRIGGER
> + select IIO_KFIFO_BUF
> + help
> + Add buffered data capture to the simple dummy driver.
> +
> +endif # IIO_SIMPLE_DUMMY
> +
> +endmenu
> diff --git a/drivers/iio/dummy/Makefile b/drivers/iio/dummy/Makefile
> new file mode 100644
> index 0000000..0765e93
> --- /dev/null
> +++ b/drivers/iio/dummy/Makefile
> @@ -0,0 +1,10 @@
> +#
> +# Makefile for the IIO Dummy Driver
> +#
> +
> +obj-$(CONFIG_IIO_SIMPLE_DUMMY) += iio_dummy.o
> +iio_dummy-y := iio_simple_dummy.o
> +iio_dummy-$(CONFIG_IIO_SIMPLE_DUMMY_EVENTS) += iio_simple_dummy_events.o
> +iio_dummy-$(CONFIG_IIO_SIMPLE_DUMMY_BUFFER) += iio_simple_dummy_buffer.o
> +
> +obj-$(CONFIG_IIO_DUMMY_EVGEN) += iio_dummy_evgen.o
> diff --git a/drivers/iio/dummy/iio_dummy_evgen.c b/drivers/iio/dummy/iio_dummy_evgen.c
> new file mode 100644
> index 0000000..9e83f34
> --- /dev/null
> +++ b/drivers/iio/dummy/iio_dummy_evgen.c
> @@ -0,0 +1,262 @@
> +/**
> + * Copyright (c) 2011 Jonathan Cameron
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * Companion module to the iio simple dummy example driver.
> + * The purpose of this is to generate 'fake' event interrupts thus
> + * allowing that driver's code to be as close as possible to that of
> + * a normal driver talking to hardware. The approach used here
> + * is not intended to be general and just happens to work for this
> + * particular use case.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/mutex.h>
> +#include <linux/module.h>
> +#include <linux/sysfs.h>
> +
> +#include "iio_dummy_evgen.h"
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/irq_work.h>
> +
> +/* Fiddly bit of faking and irq without hardware */
> +#define IIO_EVENTGEN_NO 10
> +
> +/**
> + * struct iio_dummy_handle_irq - helper struct to simulate interrupt generation
> + * @work: irq_work used to run handlers from hardirq context
> + * @irq: fake irq line number to trigger an interrupt
> + */
> +struct iio_dummy_handle_irq {
> + struct irq_work work;
> + int irq;
> +};
> +
> +/**
> + * struct iio_dummy_evgen - evgen state
> + * @chip: irq chip we are faking
> + * @base: base of irq range
> + * @enabled: mask of which irqs are enabled
> + * @inuse: mask of which irqs are connected
> + * @regs: irq regs we are faking
> + * @lock: protect the evgen state
> + * @handler: helper for a 'hardware-like' interrupt simulation
> + */
> +struct iio_dummy_eventgen {
> + struct irq_chip chip;
> + int base;
> + bool enabled[IIO_EVENTGEN_NO];
> + bool inuse[IIO_EVENTGEN_NO];
> + struct iio_dummy_regs regs[IIO_EVENTGEN_NO];
> + struct mutex lock;
> + struct iio_dummy_handle_irq handler;
> +};
> +
> +/* We can only ever have one instance of this 'device' */
> +static struct iio_dummy_eventgen *iio_evgen;
> +static const char *iio_evgen_name = "iio_dummy_evgen";
> +
> +static void iio_dummy_event_irqmask(struct irq_data *d)
> +{
> + struct irq_chip *chip = irq_data_get_irq_chip(d);
> + struct iio_dummy_eventgen *evgen =
> + container_of(chip, struct iio_dummy_eventgen, chip);
> +
> + evgen->enabled[d->irq - evgen->base] = false;
> +}
> +
> +static void iio_dummy_event_irqunmask(struct irq_data *d)
> +{
> + struct irq_chip *chip = irq_data_get_irq_chip(d);
> + struct iio_dummy_eventgen *evgen =
> + container_of(chip, struct iio_dummy_eventgen, chip);
> +
> + evgen->enabled[d->irq - evgen->base] = true;
> +}
> +
> +static void iio_dummy_work_handler(struct irq_work *work)
> +{
> + struct iio_dummy_handle_irq *irq_handler;
> +
> + irq_handler = container_of(work, struct iio_dummy_handle_irq, work);
> + handle_simple_irq(irq_to_desc(irq_handler->irq));
> +}
> +
> +static int iio_dummy_evgen_create(void)
> +{
> + int ret, i;
> +
> + iio_evgen = kzalloc(sizeof(*iio_evgen), GFP_KERNEL);
> + if (!iio_evgen)
> + return -ENOMEM;
> +
> + iio_evgen->base = irq_alloc_descs(-1, 0, IIO_EVENTGEN_NO, 0);
> + if (iio_evgen->base < 0) {
> + ret = iio_evgen->base;
> + kfree(iio_evgen);
> + return ret;
> + }
> + iio_evgen->chip.name = iio_evgen_name;
> + iio_evgen->chip.irq_mask = &iio_dummy_event_irqmask;
> + iio_evgen->chip.irq_unmask = &iio_dummy_event_irqunmask;
> + for (i = 0; i < IIO_EVENTGEN_NO; i++) {
> + irq_set_chip(iio_evgen->base + i, &iio_evgen->chip);
> + irq_set_handler(iio_evgen->base + i, &handle_simple_irq);
> + irq_modify_status(iio_evgen->base + i,
> + IRQ_NOREQUEST | IRQ_NOAUTOEN,
> + IRQ_NOPROBE);
> + }
> + init_irq_work(&iio_evgen->handler.work, iio_dummy_work_handler);
> + mutex_init(&iio_evgen->lock);
> + return 0;
> +}
> +
> +/**
> + * iio_dummy_evgen_get_irq() - get an evgen provided irq for a device
> + *
> + * This function will give a free allocated irq to a client device.
> + * That irq can then be caused to 'fire' by using the associated sysfs file.
> + */
> +int iio_dummy_evgen_get_irq(void)
> +{
> + int i, ret = 0;
> +
> + if (!iio_evgen)
> + return -ENODEV;
> +
> + mutex_lock(&iio_evgen->lock);
> + for (i = 0; i < IIO_EVENTGEN_NO; i++)
> + if (!iio_evgen->inuse[i]) {
> + ret = iio_evgen->base + i;
> + iio_evgen->inuse[i] = true;
> + break;
> + }
> + mutex_unlock(&iio_evgen->lock);
> + if (i == IIO_EVENTGEN_NO)
> + return -ENOMEM;
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(iio_dummy_evgen_get_irq);
> +
> +/**
> + * iio_dummy_evgen_release_irq() - give the irq back.
> + * @irq: irq being returned to the pool
> + *
> + * Used by client driver instances to give the irqs back when they disconnect
> + */
> +void iio_dummy_evgen_release_irq(int irq)
> +{
> + mutex_lock(&iio_evgen->lock);
> + iio_evgen->inuse[irq - iio_evgen->base] = false;
> + mutex_unlock(&iio_evgen->lock);
> +}
> +EXPORT_SYMBOL_GPL(iio_dummy_evgen_release_irq);
> +
> +struct iio_dummy_regs *iio_dummy_evgen_get_regs(int irq)
> +{
> + return &iio_evgen->regs[irq - iio_evgen->base];
> +}
> +EXPORT_SYMBOL_GPL(iio_dummy_evgen_get_regs);
> +
> +static void iio_dummy_evgen_free(void)
> +{
> + irq_free_descs(iio_evgen->base, IIO_EVENTGEN_NO);
> + kfree(iio_evgen);
> +}
> +
> +static void iio_evgen_release(struct device *dev)
> +{
> + iio_dummy_evgen_free();
> +}
> +
> +static ssize_t iio_evgen_poke(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf,
> + size_t len)
> +{
> + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
> + unsigned long event;
> + int ret;
> +
> + ret = kstrtoul(buf, 10, &event);
> + if (ret)
> + return ret;
> +
> + iio_evgen->regs[this_attr->address].reg_id = this_attr->address;
> + iio_evgen->regs[this_attr->address].reg_data = event;
> +
> + iio_evgen->handler.irq = iio_evgen->base + this_attr->address;
> + if (iio_evgen->enabled[this_attr->address])
> + irq_work_queue(&iio_evgen->handler.work);
> +
> + return len;
> +}
> +
> +static IIO_DEVICE_ATTR(poke_ev0, S_IWUSR, NULL, &iio_evgen_poke, 0);
> +static IIO_DEVICE_ATTR(poke_ev1, S_IWUSR, NULL, &iio_evgen_poke, 1);
> +static IIO_DEVICE_ATTR(poke_ev2, S_IWUSR, NULL, &iio_evgen_poke, 2);
> +static IIO_DEVICE_ATTR(poke_ev3, S_IWUSR, NULL, &iio_evgen_poke, 3);
> +static IIO_DEVICE_ATTR(poke_ev4, S_IWUSR, NULL, &iio_evgen_poke, 4);
> +static IIO_DEVICE_ATTR(poke_ev5, S_IWUSR, NULL, &iio_evgen_poke, 5);
> +static IIO_DEVICE_ATTR(poke_ev6, S_IWUSR, NULL, &iio_evgen_poke, 6);
> +static IIO_DEVICE_ATTR(poke_ev7, S_IWUSR, NULL, &iio_evgen_poke, 7);
> +static IIO_DEVICE_ATTR(poke_ev8, S_IWUSR, NULL, &iio_evgen_poke, 8);
> +static IIO_DEVICE_ATTR(poke_ev9, S_IWUSR, NULL, &iio_evgen_poke, 9);
> +
> +static struct attribute *iio_evgen_attrs[] = {
> + &iio_dev_attr_poke_ev0.dev_attr.attr,
> + &iio_dev_attr_poke_ev1.dev_attr.attr,
> + &iio_dev_attr_poke_ev2.dev_attr.attr,
> + &iio_dev_attr_poke_ev3.dev_attr.attr,
> + &iio_dev_attr_poke_ev4.dev_attr.attr,
> + &iio_dev_attr_poke_ev5.dev_attr.attr,
> + &iio_dev_attr_poke_ev6.dev_attr.attr,
> + &iio_dev_attr_poke_ev7.dev_attr.attr,
> + &iio_dev_attr_poke_ev8.dev_attr.attr,
> + &iio_dev_attr_poke_ev9.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group iio_evgen_group = {
> + .attrs = iio_evgen_attrs,
> +};
> +
> +static const struct attribute_group *iio_evgen_groups[] = {
> + &iio_evgen_group,
> + NULL
> +};
> +
> +static struct device iio_evgen_dev = {
> + .bus = &iio_bus_type,
> + .groups = iio_evgen_groups,
> + .release = &iio_evgen_release,
> +};
> +
> +static __init int iio_dummy_evgen_init(void)
> +{
> + int ret = iio_dummy_evgen_create();
> +
> + if (ret < 0)
> + return ret;
> + device_initialize(&iio_evgen_dev);
> + dev_set_name(&iio_evgen_dev, "iio_evgen");
> + return device_add(&iio_evgen_dev);
> +}
> +module_init(iio_dummy_evgen_init);
> +
> +static __exit void iio_dummy_evgen_exit(void)
> +{
> + device_unregister(&iio_evgen_dev);
> +}
> +module_exit(iio_dummy_evgen_exit);
> +
> +MODULE_AUTHOR("Jonathan Cameron <jic23@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("IIO dummy driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/dummy/iio_dummy_evgen.h b/drivers/iio/dummy/iio_dummy_evgen.h
> new file mode 100644
> index 0000000..d044b94
> --- /dev/null
> +++ b/drivers/iio/dummy/iio_dummy_evgen.h
> @@ -0,0 +1,13 @@
> +#ifndef _IIO_DUMMY_EVGEN_H_
> +#define _IIO_DUMMY_EVGEN_H_
> +
> +struct iio_dummy_regs {
> + u32 reg_id;
> + u32 reg_data;
> +};
> +
> +struct iio_dummy_regs *iio_dummy_evgen_get_regs(int irq);
> +int iio_dummy_evgen_get_irq(void);
> +void iio_dummy_evgen_release_irq(int irq);
> +
> +#endif /* _IIO_DUMMY_EVGEN_H_ */
> diff --git a/drivers/iio/dummy/iio_simple_dummy.c b/drivers/iio/dummy/iio_simple_dummy.c
> new file mode 100644
> index 0000000..381f90f
> --- /dev/null
> +++ b/drivers/iio/dummy/iio_simple_dummy.c
> @@ -0,0 +1,748 @@
> +/**
> + * Copyright (c) 2011 Jonathan Cameron
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * A reference industrial I/O driver to illustrate the functionality available.
> + *
> + * There are numerous real drivers to illustrate the finer points.
> + * The purpose of this driver is to provide a driver with far more comments
> + * and explanatory notes than any 'real' driver would have.
> + * Anyone starting out writing an IIO driver should first make sure they
> + * understand all of this driver except those bits specifically marked
> + * as being present to allow us to 'fake' the presence of hardware.
> + */
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/module.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/events.h>
> +#include <linux/iio/buffer.h>
> +#include "iio_simple_dummy.h"
> +
> +/*
> + * A few elements needed to fake a bus for this driver
> + * Note instances parameter controls how many of these
> + * dummy devices are registered.
> + */
> +static unsigned instances = 1;
> +module_param(instances, uint, 0);
> +
> +/* Pointer array used to fake bus elements */
> +static struct iio_dev **iio_dummy_devs;
> +
> +/* Fake a name for the part number, usually obtained from the id table */
> +static const char *iio_dummy_part_number = "iio_dummy_part_no";
> +
> +/**
> + * struct iio_dummy_accel_calibscale - realworld to register mapping
> + * @val: first value in read_raw - here integer part.
> + * @val2: second value in read_raw etc - here micro part.
> + * @regval: register value - magic device specific numbers.
> + */
> +struct iio_dummy_accel_calibscale {
> + int val;
> + int val2;
> + int regval; /* what would be written to hardware */
> +};
> +
> +static const struct iio_dummy_accel_calibscale dummy_scales[] = {
> + { 0, 100, 0x8 }, /* 0.000100 */
> + { 0, 133, 0x7 }, /* 0.000133 */
> + { 733, 13, 0x9 }, /* 733.000013 */
> +};
> +
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> +
> +/*
> + * simple event - triggered when value rises above
> + * a threshold
> + */
> +static const struct iio_event_spec iio_dummy_event = {
> + .type = IIO_EV_TYPE_THRESH,
> + .dir = IIO_EV_DIR_RISING,
> + .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
> +};
> +
> +/*
> + * simple step detect event - triggered when a step is detected
> + */
> +static const struct iio_event_spec step_detect_event = {
> + .type = IIO_EV_TYPE_CHANGE,
> + .dir = IIO_EV_DIR_NONE,
> + .mask_separate = BIT(IIO_EV_INFO_ENABLE),
> +};
> +
> +/*
> + * simple transition event - triggered when the reported running confidence
> + * value rises above a threshold value
> + */
> +static const struct iio_event_spec iio_running_event = {
> + .type = IIO_EV_TYPE_THRESH,
> + .dir = IIO_EV_DIR_RISING,
> + .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
> +};
> +
> +/*
> + * simple transition event - triggered when the reported walking confidence
> + * value falls under a threshold value
> + */
> +static const struct iio_event_spec iio_walking_event = {
> + .type = IIO_EV_TYPE_THRESH,
> + .dir = IIO_EV_DIR_FALLING,
> + .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
> +};
> +#endif
> +
> +/*
> + * iio_dummy_channels - Description of available channels
> + *
> + * This array of structures tells the IIO core about what the device
> + * actually provides for a given channel.
> + */
> +static const struct iio_chan_spec iio_dummy_channels[] = {
> + /* indexed ADC channel in_voltage0_raw etc */
> + {
> + .type = IIO_VOLTAGE,
> + /* Channel has a numeric index of 0 */
> + .indexed = 1,
> + .channel = 0,
> + /* What other information is available? */
> + .info_mask_separate =
> + /*
> + * in_voltage0_raw
> + * Raw (unscaled no bias removal etc) measurement
> + * from the device.
> + */
> + BIT(IIO_CHAN_INFO_RAW) |
> + /*
> + * in_voltage0_offset
> + * Offset for userspace to apply prior to scale
> + * when converting to standard units (microvolts)
> + */
> + BIT(IIO_CHAN_INFO_OFFSET) |
> + /*
> + * in_voltage0_scale
> + * Multipler for userspace to apply post offset
> + * when converting to standard units (microvolts)
> + */
> + BIT(IIO_CHAN_INFO_SCALE),
> + /*
> + * sampling_frequency
> + * The frequency in Hz at which the channels are sampled
> + */
> + .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> + /* The ordering of elements in the buffer via an enum */
> + .scan_index = voltage0,
> + .scan_type = { /* Description of storage in buffer */
> + .sign = 'u', /* unsigned */
> + .realbits = 13, /* 13 bits */
> + .storagebits = 16, /* 16 bits used for storage */
> + .shift = 0, /* zero shift */
> + },
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> + .event_spec = &iio_dummy_event,
> + .num_event_specs = 1,
> +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> + },
> + /* Differential ADC channel in_voltage1-voltage2_raw etc*/
> + {
> + .type = IIO_VOLTAGE,
> + .differential = 1,
> + /*
> + * Indexing for differential channels uses channel
> + * for the positive part, channel2 for the negative.
> + */
> + .indexed = 1,
> + .channel = 1,
> + .channel2 = 2,
> + /*
> + * in_voltage1-voltage2_raw
> + * Raw (unscaled no bias removal etc) measurement
> + * from the device.
> + */
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + /*
> + * in_voltage-voltage_scale
> + * Shared version of scale - shared by differential
> + * input channels of type IIO_VOLTAGE.
> + */
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> + /*
> + * sampling_frequency
> + * The frequency in Hz at which the channels are sampled
> + */
> + .scan_index = diffvoltage1m2,
> + .scan_type = { /* Description of storage in buffer */
> + .sign = 's', /* signed */
> + .realbits = 12, /* 12 bits */
> + .storagebits = 16, /* 16 bits used for storage */
> + .shift = 0, /* zero shift */
> + },
> + },
> + /* Differential ADC channel in_voltage3-voltage4_raw etc*/
> + {
> + .type = IIO_VOLTAGE,
> + .differential = 1,
> + .indexed = 1,
> + .channel = 3,
> + .channel2 = 4,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> + .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> + .scan_index = diffvoltage3m4,
> + .scan_type = {
> + .sign = 's',
> + .realbits = 11,
> + .storagebits = 16,
> + .shift = 0,
> + },
> + },
> + /*
> + * 'modified' (i.e. axis specified) acceleration channel
> + * in_accel_z_raw
> + */
> + {
> + .type = IIO_ACCEL,
> + .modified = 1,
> + /* Channel 2 is use for modifiers */
> + .channel2 = IIO_MOD_X,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> + /*
> + * Internal bias and gain correction values. Applied
> + * by the hardware or driver prior to userspace
> + * seeing the readings. Typically part of hardware
> + * calibration.
> + */
> + BIT(IIO_CHAN_INFO_CALIBSCALE) |
> + BIT(IIO_CHAN_INFO_CALIBBIAS),
> + .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> + .scan_index = accelx,
> + .scan_type = { /* Description of storage in buffer */
> + .sign = 's', /* signed */
> + .realbits = 16, /* 16 bits */
> + .storagebits = 16, /* 16 bits used for storage */
> + .shift = 0, /* zero shift */
> + },
> + },
> + /*
> + * Convenience macro for timestamps. 4 is the index in
> + * the buffer.
> + */
> + IIO_CHAN_SOFT_TIMESTAMP(4),
> + /* DAC channel out_voltage0_raw */
> + {
> + .type = IIO_VOLTAGE,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .scan_index = -1, /* No buffer support */
> + .output = 1,
> + .indexed = 1,
> + .channel = 0,
> + },
> + {
> + .type = IIO_STEPS,
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_ENABLE) |
> + BIT(IIO_CHAN_INFO_CALIBHEIGHT),
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> + .scan_index = -1, /* No buffer support */
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> + .event_spec = &step_detect_event,
> + .num_event_specs = 1,
> +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> + },
> + {
> + .type = IIO_ACTIVITY,
> + .modified = 1,
> + .channel2 = IIO_MOD_RUNNING,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> + .scan_index = -1, /* No buffer support */
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> + .event_spec = &iio_running_event,
> + .num_event_specs = 1,
> +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> + },
> + {
> + .type = IIO_ACTIVITY,
> + .modified = 1,
> + .channel2 = IIO_MOD_WALKING,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> + .scan_index = -1, /* No buffer support */
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> + .event_spec = &iio_walking_event,
> + .num_event_specs = 1,
> +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> + },
> +};
> +
> +/**
> + * iio_dummy_read_raw() - data read function.
> + * @indio_dev: the struct iio_dev associated with this device instance
> + * @chan: the channel whose data is to be read
> + * @val: first element of returned value (typically INT)
> + * @val2: second element of returned value (typically MICRO)
> + * @mask: what we actually want to read as per the info_mask_*
> + * in iio_chan_spec.
> + */
> +static int iio_dummy_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val,
> + int *val2,
> + long mask)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> + int ret = -EINVAL;
> +
> + mutex_lock(&st->lock);
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW: /* magic value - channel value read */
> + switch (chan->type) {
> + case IIO_VOLTAGE:
> + if (chan->output) {
> + /* Set integer part to cached value */
> + *val = st->dac_val;
> + ret = IIO_VAL_INT;
> + } else if (chan->differential) {
> + if (chan->channel == 1)
> + *val = st->differential_adc_val[0];
> + else
> + *val = st->differential_adc_val[1];
> + ret = IIO_VAL_INT;
> + } else {
> + *val = st->single_ended_adc_val;
> + ret = IIO_VAL_INT;
> + }
> + break;
> + case IIO_ACCEL:
> + *val = st->accel_val;
> + ret = IIO_VAL_INT;
> + break;
> + default:
> + break;
> + }
> + break;
> + case IIO_CHAN_INFO_PROCESSED:
> + switch (chan->type) {
> + case IIO_STEPS:
> + *val = st->steps;
> + ret = IIO_VAL_INT;
> + break;
> + case IIO_ACTIVITY:
> + switch (chan->channel2) {
> + case IIO_MOD_RUNNING:
> + *val = st->activity_running;
> + ret = IIO_VAL_INT;
> + break;
> + case IIO_MOD_WALKING:
> + *val = st->activity_walking;
> + ret = IIO_VAL_INT;
> + break;
> + default:
> + break;
> + }
> + break;
> + default:
> + break;
> + }
> + break;
> + case IIO_CHAN_INFO_OFFSET:
> + /* only single ended adc -> 7 */
> + *val = 7;
> + ret = IIO_VAL_INT;
> + break;
> + case IIO_CHAN_INFO_SCALE:
> + switch (chan->type) {
> + case IIO_VOLTAGE:
> + switch (chan->differential) {
> + case 0:
> + /* only single ended adc -> 0.001333 */
> + *val = 0;
> + *val2 = 1333;
> + ret = IIO_VAL_INT_PLUS_MICRO;
> + break;
> + case 1:
> + /* all differential adc channels ->
> + * 0.000001344 */
> + *val = 0;
> + *val2 = 1344;
> + ret = IIO_VAL_INT_PLUS_NANO;
> + }
> + break;
> + default:
> + break;
> + }
> + break;
> + case IIO_CHAN_INFO_CALIBBIAS:
> + /* only the acceleration axis - read from cache */
> + *val = st->accel_calibbias;
> + ret = IIO_VAL_INT;
> + break;
> + case IIO_CHAN_INFO_CALIBSCALE:
> + *val = st->accel_calibscale->val;
> + *val2 = st->accel_calibscale->val2;
> + ret = IIO_VAL_INT_PLUS_MICRO;
> + break;
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + *val = 3;
> + *val2 = 33;
> + ret = IIO_VAL_INT_PLUS_NANO;
> + break;
> + case IIO_CHAN_INFO_ENABLE:
> + switch (chan->type) {
> + case IIO_STEPS:
> + *val = st->steps_enabled;
> + ret = IIO_VAL_INT;
> + break;
> + default:
> + break;
> + }
> + break;
> + case IIO_CHAN_INFO_CALIBHEIGHT:
> + switch (chan->type) {
> + case IIO_STEPS:
> + *val = st->height;
> + ret = IIO_VAL_INT;
> + break;
> + default:
> + break;
> + }
> + break;
> +
> + default:
> + break;
> + }
> + mutex_unlock(&st->lock);
> + return ret;
> +}
> +
> +/**
> + * iio_dummy_write_raw() - data write function.
> + * @indio_dev: the struct iio_dev associated with this device instance
> + * @chan: the channel whose data is to be written
> + * @val: first element of value to set (typically INT)
> + * @val2: second element of value to set (typically MICRO)
> + * @mask: what we actually want to write as per the info_mask_*
> + * in iio_chan_spec.
> + *
> + * Note that all raw writes are assumed IIO_VAL_INT and info mask elements
> + * are assumed to be IIO_INT_PLUS_MICRO unless the callback write_raw_get_fmt
> + * in struct iio_info is provided by the driver.
> + */
> +static int iio_dummy_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val,
> + int val2,
> + long mask)
> +{
> + int i;
> + int ret = 0;
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + switch (chan->type) {
> + case IIO_VOLTAGE:
> + if (chan->output == 0)
> + return -EINVAL;
> +
> + /* Locking not required as writing single value */
> + mutex_lock(&st->lock);
> + st->dac_val = val;
> + mutex_unlock(&st->lock);
> + return 0;
> + default:
> + return -EINVAL;
> + }
> + case IIO_CHAN_INFO_PROCESSED:
> + switch (chan->type) {
> + case IIO_STEPS:
> + mutex_lock(&st->lock);
> + st->steps = val;
> + mutex_unlock(&st->lock);
> + return 0;
> + case IIO_ACTIVITY:
> + if (val < 0)
> + val = 0;
> + if (val > 100)
> + val = 100;
> + switch (chan->channel2) {
> + case IIO_MOD_RUNNING:
> + st->activity_running = val;
> + return 0;
> + case IIO_MOD_WALKING:
> + st->activity_walking = val;
> + return 0;
> + default:
> + return -EINVAL;
> + }
> + break;
> + default:
> + return -EINVAL;
> + }
> + case IIO_CHAN_INFO_CALIBSCALE:
> + mutex_lock(&st->lock);
> + /* Compare against table - hard matching here */
> + for (i = 0; i < ARRAY_SIZE(dummy_scales); i++)
> + if (val == dummy_scales[i].val &&
> + val2 == dummy_scales[i].val2)
> + break;
> + if (i == ARRAY_SIZE(dummy_scales))
> + ret = -EINVAL;
> + else
> + st->accel_calibscale = &dummy_scales[i];
> + mutex_unlock(&st->lock);
> + return ret;
> + case IIO_CHAN_INFO_CALIBBIAS:
> + mutex_lock(&st->lock);
> + st->accel_calibbias = val;
> + mutex_unlock(&st->lock);
> + return 0;
> + case IIO_CHAN_INFO_ENABLE:
> + switch (chan->type) {
> + case IIO_STEPS:
> + mutex_lock(&st->lock);
> + st->steps_enabled = val;
> + mutex_unlock(&st->lock);
> + return 0;
> + default:
> + return -EINVAL;
> + }
> + case IIO_CHAN_INFO_CALIBHEIGHT:
> + switch (chan->type) {
> + case IIO_STEPS:
> + st->height = val;
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +/*
> + * Device type specific information.
> + */
> +static const struct iio_info iio_dummy_info = {
> + .driver_module = THIS_MODULE,
> + .read_raw = &iio_dummy_read_raw,
> + .write_raw = &iio_dummy_write_raw,
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> + .read_event_config = &iio_simple_dummy_read_event_config,
> + .write_event_config = &iio_simple_dummy_write_event_config,
> + .read_event_value = &iio_simple_dummy_read_event_value,
> + .write_event_value = &iio_simple_dummy_write_event_value,
> +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> +};
> +
> +/**
> + * iio_dummy_init_device() - device instance specific init
> + * @indio_dev: the iio device structure
> + *
> + * Most drivers have one of these to set up default values,
> + * reset the device to known state etc.
> + */
> +static int iio_dummy_init_device(struct iio_dev *indio_dev)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + st->dac_val = 0;
> + st->single_ended_adc_val = 73;
> + st->differential_adc_val[0] = 33;
> + st->differential_adc_val[1] = -34;
> + st->accel_val = 34;
> + st->accel_calibbias = -7;
> + st->accel_calibscale = &dummy_scales[0];
> + st->steps = 47;
> + st->activity_running = 98;
> + st->activity_walking = 4;
> +
> + return 0;
> +}
> +
> +/**
> + * iio_dummy_probe() - device instance probe
> + * @index: an id number for this instance.
> + *
> + * Arguments are bus type specific.
> + * I2C: iio_dummy_probe(struct i2c_client *client,
> + * const struct i2c_device_id *id)
> + * SPI: iio_dummy_probe(struct spi_device *spi)
> + */
> +static int iio_dummy_probe(int index)
> +{
> + int ret;
> + struct iio_dev *indio_dev;
> + struct iio_dummy_state *st;
> +
> + /*
> + * Allocate an IIO device.
> + *
> + * This structure contains all generic state
> + * information about the device instance.
> + * It also has a region (accessed by iio_priv()
> + * for chip specific state information.
> + */
> + indio_dev = iio_device_alloc(sizeof(*st));
> + if (!indio_dev) {
> + ret = -ENOMEM;
> + goto error_ret;
> + }
> +
> + st = iio_priv(indio_dev);
> + mutex_init(&st->lock);
> +
> + iio_dummy_init_device(indio_dev);
> + /*
> + * With hardware: Set the parent device.
> + * indio_dev->dev.parent = &spi->dev;
> + * indio_dev->dev.parent = &client->dev;
> + */
> +
> + /*
> + * Make the iio_dev struct available to remove function.
> + * Bus equivalents
> + * i2c_set_clientdata(client, indio_dev);
> + * spi_set_drvdata(spi, indio_dev);
> + */
> + iio_dummy_devs[index] = indio_dev;
> +
> + /*
> + * Set the device name.
> + *
> + * This is typically a part number and obtained from the module
> + * id table.
> + * e.g. for i2c and spi:
> + * indio_dev->name = id->name;
> + * indio_dev->name = spi_get_device_id(spi)->name;
> + */
> + indio_dev->name = iio_dummy_part_number;
> +
> + /* Provide description of available channels */
> + indio_dev->channels = iio_dummy_channels;
> + indio_dev->num_channels = ARRAY_SIZE(iio_dummy_channels);
> +
> + /*
> + * Provide device type specific interface functions and
> + * constant data.
> + */
> + indio_dev->info = &iio_dummy_info;
> +
> + /* Specify that device provides sysfs type interfaces */
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + ret = iio_simple_dummy_events_register(indio_dev);
> + if (ret < 0)
> + goto error_free_device;
> +
> + ret = iio_simple_dummy_configure_buffer(indio_dev);
> + if (ret < 0)
> + goto error_unregister_events;
> +
> + ret = iio_device_register(indio_dev);
> + if (ret < 0)
> + goto error_unconfigure_buffer;
> +
> + return 0;
> +error_unconfigure_buffer:
> + iio_simple_dummy_unconfigure_buffer(indio_dev);
> +error_unregister_events:
> + iio_simple_dummy_events_unregister(indio_dev);
> +error_free_device:
> + iio_device_free(indio_dev);
> +error_ret:
> + return ret;
> +}
> +
> +/**
> + * iio_dummy_remove() - device instance removal function
> + * @index: device index.
> + *
> + * Parameters follow those of iio_dummy_probe for buses.
> + */
> +static void iio_dummy_remove(int index)
> +{
> + /*
> + * Get a pointer to the device instance iio_dev structure
> + * from the bus subsystem. E.g.
> + * struct iio_dev *indio_dev = i2c_get_clientdata(client);
> + * struct iio_dev *indio_dev = spi_get_drvdata(spi);
> + */
> + struct iio_dev *indio_dev = iio_dummy_devs[index];
> +
> + /* Unregister the device */
> + iio_device_unregister(indio_dev);
> +
> + /* Device specific code to power down etc */
> +
> + /* Buffered capture related cleanup */
> + iio_simple_dummy_unconfigure_buffer(indio_dev);
> +
> + iio_simple_dummy_events_unregister(indio_dev);
> +
> + /* Free all structures */
> + iio_device_free(indio_dev);
> +}
> +
> +/**
> + * iio_dummy_init() - device driver registration
> + *
> + * Varies depending on bus type of the device. As there is no device
> + * here, call probe directly. For information on device registration
> + * i2c:
> + * Documentation/i2c/writing-clients
> + * spi:
> + * Documentation/spi/spi-summary
> + */
> +static __init int iio_dummy_init(void)
> +{
> + int i, ret;
> +
> + if (instances > 10) {
> + instances = 1;
> + return -EINVAL;
> + }
> +
> + /* Fake a bus */
> + iio_dummy_devs = kcalloc(instances, sizeof(*iio_dummy_devs),
> + GFP_KERNEL);
> + /* Here we have no actual device so call probe */
> + for (i = 0; i < instances; i++) {
> + ret = iio_dummy_probe(i);
> + if (ret < 0)
> + goto error_remove_devs;
> + }
> + return 0;
> +
> +error_remove_devs:
> + while (i--)
> + iio_dummy_remove(i);
> +
> + kfree(iio_dummy_devs);
> + return ret;
> +}
> +module_init(iio_dummy_init);
> +
> +/**
> + * iio_dummy_exit() - device driver removal
> + *
> + * Varies depending on bus type of the device.
> + * As there is no device here, call remove directly.
> + */
> +static __exit void iio_dummy_exit(void)
> +{
> + int i;
> +
> + for (i = 0; i < instances; i++)
> + iio_dummy_remove(i);
> + kfree(iio_dummy_devs);
> +}
> +module_exit(iio_dummy_exit);
> +
> +MODULE_AUTHOR("Jonathan Cameron <jic23@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("IIO dummy driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/dummy/iio_simple_dummy.h b/drivers/iio/dummy/iio_simple_dummy.h
> new file mode 100644
> index 0000000..5c2f4d0
> --- /dev/null
> +++ b/drivers/iio/dummy/iio_simple_dummy.h
> @@ -0,0 +1,129 @@
> +/**
> + * Copyright (c) 2011 Jonathan Cameron
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * Join together the various functionality of iio_simple_dummy driver
> + */
> +
> +#ifndef _IIO_SIMPLE_DUMMY_H_
> +#define _IIO_SIMPLE_DUMMY_H_
> +#include <linux/kernel.h>
> +
> +struct iio_dummy_accel_calibscale;
> +struct iio_dummy_regs;
> +
> +/**
> + * struct iio_dummy_state - device instance specific state.
> + * @dac_val: cache for dac value
> + * @single_ended_adc_val: cache for single ended adc value
> + * @differential_adc_val: cache for differential adc value
> + * @accel_val: cache for acceleration value
> + * @accel_calibbias: cache for acceleration calibbias
> + * @accel_calibscale: cache for acceleration calibscale
> + * @lock: lock to ensure state is consistent
> + * @event_irq: irq number for event line (faked)
> + * @event_val: cache for event threshold value
> + * @event_en: cache of whether event is enabled
> + */
> +struct iio_dummy_state {
> + int dac_val;
> + int single_ended_adc_val;
> + int differential_adc_val[2];
> + int accel_val;
> + int accel_calibbias;
> + int activity_running;
> + int activity_walking;
> + const struct iio_dummy_accel_calibscale *accel_calibscale;
> + struct mutex lock;
> + struct iio_dummy_regs *regs;
> + int steps_enabled;
> + int steps;
> + int height;
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> + int event_irq;
> + int event_val;
> + bool event_en;
> + s64 event_timestamp;
> +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> +};
> +
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> +
> +struct iio_dev;
> +
> +int iio_simple_dummy_read_event_config(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir);
> +
> +int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir,
> + int state);
> +
> +int iio_simple_dummy_read_event_value(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir,
> + enum iio_event_info info, int *val,
> + int *val2);
> +
> +int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir,
> + enum iio_event_info info, int val,
> + int val2);
> +
> +int iio_simple_dummy_events_register(struct iio_dev *indio_dev);
> +void iio_simple_dummy_events_unregister(struct iio_dev *indio_dev);
> +
> +#else /* Stubs for when events are disabled at compile time */
> +
> +static inline int
> +iio_simple_dummy_events_register(struct iio_dev *indio_dev)
> +{
> + return 0;
> +};
> +
> +static inline void
> +iio_simple_dummy_events_unregister(struct iio_dev *indio_dev)
> +{ };
> +
> +#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS*/
> +
> +/**
> + * enum iio_simple_dummy_scan_elements - scan index enum
> + * @voltage0: the single ended voltage channel
> + * @diffvoltage1m2: first differential channel
> + * @diffvoltage3m4: second differenial channel
> + * @accelx: acceleration channel
> + *
> + * Enum provides convenient numbering for the scan index.
> + */
> +enum iio_simple_dummy_scan_elements {
> + voltage0,
> + diffvoltage1m2,
> + diffvoltage3m4,
> + accelx,
> +};
> +
> +#ifdef CONFIG_IIO_SIMPLE_DUMMY_BUFFER
> +int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev);
> +void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev);
> +#else
> +static inline int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev)
> +{
> + return 0;
> +};
> +
> +static inline
> +void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev)
> +{};
> +
> +#endif /* CONFIG_IIO_SIMPLE_DUMMY_BUFFER */
> +#endif /* _IIO_SIMPLE_DUMMY_H_ */
> diff --git a/drivers/iio/dummy/iio_simple_dummy_buffer.c b/drivers/iio/dummy/iio_simple_dummy_buffer.c
> new file mode 100644
> index 0000000..00ed774
> --- /dev/null
> +++ b/drivers/iio/dummy/iio_simple_dummy_buffer.c
> @@ -0,0 +1,192 @@
> +/**
> + * Copyright (c) 2011 Jonathan Cameron
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * Buffer handling elements of industrial I/O reference driver.
> + * Uses the kfifo buffer.
> + *
> + * To test without hardware use the sysfs trigger.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/export.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/bitmap.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/trigger_consumer.h>
> +#include <linux/iio/kfifo_buf.h>
> +
> +#include "iio_simple_dummy.h"
> +
> +/* Some fake data */
> +
> +static const s16 fakedata[] = {
> + [voltage0] = 7,
> + [diffvoltage1m2] = -33,
> + [diffvoltage3m4] = -2,
> + [accelx] = 344,
> +};
> +
> +/**
> + * iio_simple_dummy_trigger_h() - the trigger handler function
> + * @irq: the interrupt number
> + * @p: private data - always a pointer to the poll func.
> + *
> + * This is the guts of buffered capture. On a trigger event occurring,
> + * if the pollfunc is attached then this handler is called as a threaded
> + * interrupt (and hence may sleep). It is responsible for grabbing data
> + * from the device and pushing it into the associated buffer.
> + */
> +static irqreturn_t iio_simple_dummy_trigger_h(int irq, void *p)
> +{
> + struct iio_poll_func *pf = p;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + int len = 0;
> + u16 *data;
> +
> + data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
> + if (!data)
> + goto done;
> +
> + if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) {
> + /*
> + * Three common options here:
> + * hardware scans: certain combinations of channels make
> + * up a fast read. The capture will consist of all of them.
> + * Hence we just call the grab data function and fill the
> + * buffer without processing.
> + * software scans: can be considered to be random access
> + * so efficient reading is just a case of minimal bus
> + * transactions.
> + * software culled hardware scans:
> + * occasionally a driver may process the nearest hardware
> + * scan to avoid storing elements that are not desired. This
> + * is the fiddliest option by far.
> + * Here let's pretend we have random access. And the values are
> + * in the constant table fakedata.
> + */
> + int i, j;
> +
> + for (i = 0, j = 0;
> + i < bitmap_weight(indio_dev->active_scan_mask,
> + indio_dev->masklength);
> + i++, j++) {
> + j = find_next_bit(indio_dev->active_scan_mask,
> + indio_dev->masklength, j);
> + /* random access read from the 'device' */
> + data[i] = fakedata[j];
> + len += 2;
> + }
> + }
> +
> + iio_push_to_buffers_with_timestamp(indio_dev, data, iio_get_time_ns());
> +
> + kfree(data);
> +
> +done:
> + /*
> + * Tell the core we are done with this trigger and ready for the
> + * next one.
> + */
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static const struct iio_buffer_setup_ops iio_simple_dummy_buffer_setup_ops = {
> + /*
> + * iio_triggered_buffer_postenable:
> + * Generic function that simply attaches the pollfunc to the trigger.
> + * Replace this to mess with hardware state before we attach the
> + * trigger.
> + */
> + .postenable = &iio_triggered_buffer_postenable,
> + /*
> + * iio_triggered_buffer_predisable:
> + * Generic function that simple detaches the pollfunc from the trigger.
> + * Replace this to put hardware state back again after the trigger is
> + * detached but before userspace knows we have disabled the ring.
> + */
> + .predisable = &iio_triggered_buffer_predisable,
> +};
> +
> +int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev)
> +{
> + int ret;
> + struct iio_buffer *buffer;
> +
> + /* Allocate a buffer to use - here a kfifo */
> + buffer = iio_kfifo_allocate();
> + if (!buffer) {
> + ret = -ENOMEM;
> + goto error_ret;
> + }
> +
> + iio_device_attach_buffer(indio_dev, buffer);
> +
> + /* Enable timestamps by default */
> + buffer->scan_timestamp = true;
> +
> + /*
> + * Tell the core what device type specific functions should
> + * be run on either side of buffer capture enable / disable.
> + */
> + indio_dev->setup_ops = &iio_simple_dummy_buffer_setup_ops;
> +
> + /*
> + * Configure a polling function.
> + * When a trigger event with this polling function connected
> + * occurs, this function is run. Typically this grabs data
> + * from the device.
> + *
> + * NULL for the bottom half. This is normally implemented only if we
> + * either want to ping a capture now pin (no sleeping) or grab
> + * a timestamp as close as possible to a data ready trigger firing.
> + *
> + * IRQF_ONESHOT ensures irqs are masked such that only one instance
> + * of the handler can run at a time.
> + *
> + * "iio_simple_dummy_consumer%d" formatting string for the irq 'name'
> + * as seen under /proc/interrupts. Remaining parameters as per printk.
> + */
> + indio_dev->pollfunc = iio_alloc_pollfunc(NULL,
> + &iio_simple_dummy_trigger_h,
> + IRQF_ONESHOT,
> + indio_dev,
> + "iio_simple_dummy_consumer%d",
> + indio_dev->id);
> +
> + if (!indio_dev->pollfunc) {
> + ret = -ENOMEM;
> + goto error_free_buffer;
> + }
> +
> + /*
> + * Notify the core that this device is capable of buffered capture
> + * driven by a trigger.
> + */
> + indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
> +
> + return 0;
> +
> +error_free_buffer:
> + iio_kfifo_free(indio_dev->buffer);
> +error_ret:
> + return ret;
> +}
> +
> +/**
> + * iio_simple_dummy_unconfigure_buffer() - release buffer resources
> + * @indo_dev: device instance state
> + */
> +void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev)
> +{
> + iio_dealloc_pollfunc(indio_dev->pollfunc);
> + iio_kfifo_free(indio_dev->buffer);
> +}
> diff --git a/drivers/iio/dummy/iio_simple_dummy_events.c b/drivers/iio/dummy/iio_simple_dummy_events.c
> new file mode 100644
> index 0000000..bfbf1c5
> --- /dev/null
> +++ b/drivers/iio/dummy/iio_simple_dummy_events.c
> @@ -0,0 +1,276 @@
> +/**
> + * Copyright (c) 2011 Jonathan Cameron
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * Event handling elements of industrial I/O reference driver.
> + */
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/events.h>
> +#include "iio_simple_dummy.h"
> +
> +/* Evgen 'fakes' interrupt events for this example */
> +#include "iio_dummy_evgen.h"
> +
> +/**
> + * iio_simple_dummy_read_event_config() - is event enabled?
> + * @indio_dev: the device instance data
> + * @chan: channel for the event whose state is being queried
> + * @type: type of the event whose state is being queried
> + * @dir: direction of the vent whose state is being queried
> + *
> + * This function would normally query the relevant registers or a cache to
> + * discover if the event generation is enabled on the device.
> + */
> +int iio_simple_dummy_read_event_config(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + return st->event_en;
> +}
> +
> +/**
> + * iio_simple_dummy_write_event_config() - set whether event is enabled
> + * @indio_dev: the device instance data
> + * @chan: channel for the event whose state is being set
> + * @type: type of the event whose state is being set
> + * @dir: direction of the vent whose state is being set
> + * @state: whether to enable or disable the device.
> + *
> + * This function would normally set the relevant registers on the devices
> + * so that it generates the specified event. Here it just sets up a cached
> + * value.
> + */
> +int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir,
> + int state)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + /*
> + * Deliberately over the top code splitting to illustrate
> + * how this is done when multiple events exist.
> + */
> + switch (chan->type) {
> + case IIO_VOLTAGE:
> + switch (type) {
> + case IIO_EV_TYPE_THRESH:
> + if (dir == IIO_EV_DIR_RISING)
> + st->event_en = state;
> + else
> + return -EINVAL;
> + default:
> + return -EINVAL;
> + }
> + break;
> + case IIO_ACTIVITY:
> + switch (type) {
> + case IIO_EV_TYPE_THRESH:
> + st->event_en = state;
> + break;
> + default:
> + return -EINVAL;
> + }
> + break;
> + case IIO_STEPS:
> + switch (type) {
> + case IIO_EV_TYPE_CHANGE:
> + st->event_en = state;
> + break;
> + default:
> + return -EINVAL;
> + }
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * iio_simple_dummy_read_event_value() - get value associated with event
> + * @indio_dev: device instance specific data
> + * @chan: channel for the event whose value is being read
> + * @type: type of the event whose value is being read
> + * @dir: direction of the vent whose value is being read
> + * @info: info type of the event whose value is being read
> + * @val: value for the event code.
> + *
> + * Many devices provide a large set of events of which only a subset may
> + * be enabled at a time, with value registers whose meaning changes depending
> + * on the event enabled. This often means that the driver must cache the values
> + * associated with each possible events so that the right value is in place when
> + * the enabled event is changed.
> + */
> +int iio_simple_dummy_read_event_value(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir,
> + enum iio_event_info info,
> + int *val, int *val2)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + *val = st->event_val;
> +
> + return IIO_VAL_INT;
> +}
> +
> +/**
> + * iio_simple_dummy_write_event_value() - set value associate with event
> + * @indio_dev: device instance specific data
> + * @chan: channel for the event whose value is being set
> + * @type: type of the event whose value is being set
> + * @dir: direction of the vent whose value is being set
> + * @info: info type of the event whose value is being set
> + * @val: the value to be set.
> + */
> +int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir,
> + enum iio_event_info info,
> + int val, int val2)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + st->event_val = val;
> +
> + return 0;
> +}
> +
> +static irqreturn_t iio_simple_dummy_get_timestamp(int irq, void *private)
> +{
> + struct iio_dev *indio_dev = private;
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + st->event_timestamp = iio_get_time_ns();
> + return IRQ_HANDLED;
> +}
> +
> +/**
> + * iio_simple_dummy_event_handler() - identify and pass on event
> + * @irq: irq of event line
> + * @private: pointer to device instance state.
> + *
> + * This handler is responsible for querying the device to find out what
> + * event occurred and for then pushing that event towards userspace.
> + * Here only one event occurs so we push that directly on with locally
> + * grabbed timestamp.
> + */
> +static irqreturn_t iio_simple_dummy_event_handler(int irq, void *private)
> +{
> + struct iio_dev *indio_dev = private;
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + dev_dbg(&indio_dev->dev, "id %x event %x\n",
> + st->regs->reg_id, st->regs->reg_data);
> +
> + switch (st->regs->reg_data) {
> + case 0:
> + iio_push_event(indio_dev,
> + IIO_EVENT_CODE(IIO_VOLTAGE, 0, 0,
> + IIO_EV_DIR_RISING,
> + IIO_EV_TYPE_THRESH, 0, 0, 0),
> + st->event_timestamp);
> + break;
> + case 1:
> + if (st->activity_running > st->event_val)
> + iio_push_event(indio_dev,
> + IIO_EVENT_CODE(IIO_ACTIVITY, 0,
> + IIO_MOD_RUNNING,
> + IIO_EV_DIR_RISING,
> + IIO_EV_TYPE_THRESH,
> + 0, 0, 0),
> + st->event_timestamp);
> + break;
> + case 2:
> + if (st->activity_walking < st->event_val)
> + iio_push_event(indio_dev,
> + IIO_EVENT_CODE(IIO_ACTIVITY, 0,
> + IIO_MOD_WALKING,
> + IIO_EV_DIR_FALLING,
> + IIO_EV_TYPE_THRESH,
> + 0, 0, 0),
> + st->event_timestamp);
> + break;
> + case 3:
> + iio_push_event(indio_dev,
> + IIO_EVENT_CODE(IIO_STEPS, 0, IIO_NO_MOD,
> + IIO_EV_DIR_NONE,
> + IIO_EV_TYPE_CHANGE, 0, 0, 0),
> + st->event_timestamp);
> + break;
> + default:
> + break;
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +/**
> + * iio_simple_dummy_events_register() - setup interrupt handling for events
> + * @indio_dev: device instance data
> + *
> + * This function requests the threaded interrupt to handle the events.
> + * Normally the irq is a hardware interrupt and the number comes
> + * from board configuration files. Here we get it from a companion
> + * module that fakes the interrupt for us. Note that module in
> + * no way forms part of this example. Just assume that events magically
> + * appear via the provided interrupt.
> + */
> +int iio_simple_dummy_events_register(struct iio_dev *indio_dev)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> + int ret;
> +
> + /* Fire up event source - normally not present */
> + st->event_irq = iio_dummy_evgen_get_irq();
> + if (st->event_irq < 0) {
> + ret = st->event_irq;
> + goto error_ret;
> + }
> + st->regs = iio_dummy_evgen_get_regs(st->event_irq);
> +
> + ret = request_threaded_irq(st->event_irq,
> + &iio_simple_dummy_get_timestamp,
> + &iio_simple_dummy_event_handler,
> + IRQF_ONESHOT,
> + "iio_simple_event",
> + indio_dev);
> + if (ret < 0)
> + goto error_free_evgen;
> + return 0;
> +
> +error_free_evgen:
> + iio_dummy_evgen_release_irq(st->event_irq);
> +error_ret:
> + return ret;
> +}
> +
> +/**
> + * iio_simple_dummy_events_unregister() - tidy up interrupt handling on remove
> + * @indio_dev: device instance data
> + */
> +void iio_simple_dummy_events_unregister(struct iio_dev *indio_dev)
> +{
> + struct iio_dummy_state *st = iio_priv(indio_dev);
> +
> + free_irq(st->event_irq, indio_dev);
> + /* Not part of normal driver */
> + iio_dummy_evgen_release_irq(st->event_irq);
> +}
> diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
> index 6d5b38d..85de198 100644
> --- a/drivers/staging/iio/Kconfig
> +++ b/drivers/staging/iio/Kconfig
> @@ -17,32 +17,32 @@ source "drivers/staging/iio/meter/Kconfig"
> source "drivers/staging/iio/resolver/Kconfig"
> source "drivers/staging/iio/trigger/Kconfig"
>
> -config IIO_DUMMY_EVGEN
> - tristate
> -
> -config IIO_SIMPLE_DUMMY
> - tristate "An example driver with no hardware requirements"
> - help
> - Driver intended mainly as documentation for how to write
> - a driver. May also be useful for testing userspace code
> - without hardware.
> -
> -if IIO_SIMPLE_DUMMY
> -
> -config IIO_SIMPLE_DUMMY_EVENTS
> - bool "Event generation support"
> - select IIO_DUMMY_EVGEN
> - help
> - Add some dummy events to the simple dummy driver.
> -
> -config IIO_SIMPLE_DUMMY_BUFFER
> - bool "Buffered capture support"
> - select IIO_BUFFER
> - select IIO_TRIGGER
> - select IIO_KFIFO_BUF
> - help
> - Add buffered data capture to the simple dummy driver.
> -
> -endif # IIO_SIMPLE_DUMMY
> +#config IIO_DUMMY_EVGEN
> +# tristate
> +#
> +#config IIO_SIMPLE_DUMMY
> +# tristate "An example driver with no hardware requirements"
> +# help
> +# Driver intended mainly as documentation for how to write
> +# a driver. May also be useful for testing userspace code
> +# without hardware.
> +
> +#if IIO_SIMPLE_DUMMY
> +
> +#config IIO_SIMPLE_DUMMY_EVENTS
> +# bool "Event generation support"
> +# select IIO_DUMMY_EVGEN
> +# help
> +# Add some dummy events to the simple dummy driver.
> +
> +#config IIO_SIMPLE_DUMMY_BUFFER
> +# bool "Buffered capture support"
> +# select IIO_BUFFER
> +# select IIO_TRIGGER
> +# select IIO_KFIFO_BUF
> +# help
> +# Add buffered data capture to the simple dummy driver.
> +
> +#endif # IIO_SIMPLE_DUMMY
>
> endmenu
> diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile
> index d871061..355824a 100644
> --- a/drivers/staging/iio/Makefile
> +++ b/drivers/staging/iio/Makefile
> @@ -2,12 +2,12 @@
> # Makefile for the industrial I/O core.
> #
>
> -obj-$(CONFIG_IIO_SIMPLE_DUMMY) += iio_dummy.o
> -iio_dummy-y := iio_simple_dummy.o
> -iio_dummy-$(CONFIG_IIO_SIMPLE_DUMMY_EVENTS) += iio_simple_dummy_events.o
> -iio_dummy-$(CONFIG_IIO_SIMPLE_DUMMY_BUFFER) += iio_simple_dummy_buffer.o
> +#obj-$(CONFIG_IIO_SIMPLE_DUMMY) += iio_dummy.o
> +#iio_dummy-y := iio_simple_dummy.o
> +#iio_dummy-$(CONFIG_IIO_SIMPLE_DUMMY_EVENTS) += iio_simple_dummy_events.o
> +#iio_dummy-$(CONFIG_IIO_SIMPLE_DUMMY_BUFFER) += iio_simple_dummy_buffer.o
>
> -obj-$(CONFIG_IIO_DUMMY_EVGEN) += iio_dummy_evgen.o
> +#obj-$(CONFIG_IIO_DUMMY_EVGEN) += iio_dummy_evgen.o
>
> obj-y += accel/
> obj-y += adc/
> diff --git a/drivers/staging/iio/iio_dummy_evgen.c b/drivers/staging/iio/iio_dummy_evgen.c
> deleted file mode 100644
> index 9e83f34..0000000
> --- a/drivers/staging/iio/iio_dummy_evgen.c
> +++ /dev/null
> @@ -1,262 +0,0 @@
> -/**
> - * Copyright (c) 2011 Jonathan Cameron
> - *
> - * This program is free software; you can redistribute it and/or modify it
> - * under the terms of the GNU General Public License version 2 as published by
> - * the Free Software Foundation.
> - *
> - * Companion module to the iio simple dummy example driver.
> - * The purpose of this is to generate 'fake' event interrupts thus
> - * allowing that driver's code to be as close as possible to that of
> - * a normal driver talking to hardware. The approach used here
> - * is not intended to be general and just happens to work for this
> - * particular use case.
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/slab.h>
> -#include <linux/interrupt.h>
> -#include <linux/irq.h>
> -#include <linux/mutex.h>
> -#include <linux/module.h>
> -#include <linux/sysfs.h>
> -
> -#include "iio_dummy_evgen.h"
> -#include <linux/iio/iio.h>
> -#include <linux/iio/sysfs.h>
> -#include <linux/irq_work.h>
> -
> -/* Fiddly bit of faking and irq without hardware */
> -#define IIO_EVENTGEN_NO 10
> -
> -/**
> - * struct iio_dummy_handle_irq - helper struct to simulate interrupt generation
> - * @work: irq_work used to run handlers from hardirq context
> - * @irq: fake irq line number to trigger an interrupt
> - */
> -struct iio_dummy_handle_irq {
> - struct irq_work work;
> - int irq;
> -};
> -
> -/**
> - * struct iio_dummy_evgen - evgen state
> - * @chip: irq chip we are faking
> - * @base: base of irq range
> - * @enabled: mask of which irqs are enabled
> - * @inuse: mask of which irqs are connected
> - * @regs: irq regs we are faking
> - * @lock: protect the evgen state
> - * @handler: helper for a 'hardware-like' interrupt simulation
> - */
> -struct iio_dummy_eventgen {
> - struct irq_chip chip;
> - int base;
> - bool enabled[IIO_EVENTGEN_NO];
> - bool inuse[IIO_EVENTGEN_NO];
> - struct iio_dummy_regs regs[IIO_EVENTGEN_NO];
> - struct mutex lock;
> - struct iio_dummy_handle_irq handler;
> -};
> -
> -/* We can only ever have one instance of this 'device' */
> -static struct iio_dummy_eventgen *iio_evgen;
> -static const char *iio_evgen_name = "iio_dummy_evgen";
> -
> -static void iio_dummy_event_irqmask(struct irq_data *d)
> -{
> - struct irq_chip *chip = irq_data_get_irq_chip(d);
> - struct iio_dummy_eventgen *evgen =
> - container_of(chip, struct iio_dummy_eventgen, chip);
> -
> - evgen->enabled[d->irq - evgen->base] = false;
> -}
> -
> -static void iio_dummy_event_irqunmask(struct irq_data *d)
> -{
> - struct irq_chip *chip = irq_data_get_irq_chip(d);
> - struct iio_dummy_eventgen *evgen =
> - container_of(chip, struct iio_dummy_eventgen, chip);
> -
> - evgen->enabled[d->irq - evgen->base] = true;
> -}
> -
> -static void iio_dummy_work_handler(struct irq_work *work)
> -{
> - struct iio_dummy_handle_irq *irq_handler;
> -
> - irq_handler = container_of(work, struct iio_dummy_handle_irq, work);
> - handle_simple_irq(irq_to_desc(irq_handler->irq));
> -}
> -
> -static int iio_dummy_evgen_create(void)
> -{
> - int ret, i;
> -
> - iio_evgen = kzalloc(sizeof(*iio_evgen), GFP_KERNEL);
> - if (!iio_evgen)
> - return -ENOMEM;
> -
> - iio_evgen->base = irq_alloc_descs(-1, 0, IIO_EVENTGEN_NO, 0);
> - if (iio_evgen->base < 0) {
> - ret = iio_evgen->base;
> - kfree(iio_evgen);
> - return ret;
> - }
> - iio_evgen->chip.name = iio_evgen_name;
> - iio_evgen->chip.irq_mask = &iio_dummy_event_irqmask;
> - iio_evgen->chip.irq_unmask = &iio_dummy_event_irqunmask;
> - for (i = 0; i < IIO_EVENTGEN_NO; i++) {
> - irq_set_chip(iio_evgen->base + i, &iio_evgen->chip);
> - irq_set_handler(iio_evgen->base + i, &handle_simple_irq);
> - irq_modify_status(iio_evgen->base + i,
> - IRQ_NOREQUEST | IRQ_NOAUTOEN,
> - IRQ_NOPROBE);
> - }
> - init_irq_work(&iio_evgen->handler.work, iio_dummy_work_handler);
> - mutex_init(&iio_evgen->lock);
> - return 0;
> -}
> -
> -/**
> - * iio_dummy_evgen_get_irq() - get an evgen provided irq for a device
> - *
> - * This function will give a free allocated irq to a client device.
> - * That irq can then be caused to 'fire' by using the associated sysfs file.
> - */
> -int iio_dummy_evgen_get_irq(void)
> -{
> - int i, ret = 0;
> -
> - if (!iio_evgen)
> - return -ENODEV;
> -
> - mutex_lock(&iio_evgen->lock);
> - for (i = 0; i < IIO_EVENTGEN_NO; i++)
> - if (!iio_evgen->inuse[i]) {
> - ret = iio_evgen->base + i;
> - iio_evgen->inuse[i] = true;
> - break;
> - }
> - mutex_unlock(&iio_evgen->lock);
> - if (i == IIO_EVENTGEN_NO)
> - return -ENOMEM;
> - return ret;
> -}
> -EXPORT_SYMBOL_GPL(iio_dummy_evgen_get_irq);
> -
> -/**
> - * iio_dummy_evgen_release_irq() - give the irq back.
> - * @irq: irq being returned to the pool
> - *
> - * Used by client driver instances to give the irqs back when they disconnect
> - */
> -void iio_dummy_evgen_release_irq(int irq)
> -{
> - mutex_lock(&iio_evgen->lock);
> - iio_evgen->inuse[irq - iio_evgen->base] = false;
> - mutex_unlock(&iio_evgen->lock);
> -}
> -EXPORT_SYMBOL_GPL(iio_dummy_evgen_release_irq);
> -
> -struct iio_dummy_regs *iio_dummy_evgen_get_regs(int irq)
> -{
> - return &iio_evgen->regs[irq - iio_evgen->base];
> -}
> -EXPORT_SYMBOL_GPL(iio_dummy_evgen_get_regs);
> -
> -static void iio_dummy_evgen_free(void)
> -{
> - irq_free_descs(iio_evgen->base, IIO_EVENTGEN_NO);
> - kfree(iio_evgen);
> -}
> -
> -static void iio_evgen_release(struct device *dev)
> -{
> - iio_dummy_evgen_free();
> -}
> -
> -static ssize_t iio_evgen_poke(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf,
> - size_t len)
> -{
> - struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
> - unsigned long event;
> - int ret;
> -
> - ret = kstrtoul(buf, 10, &event);
> - if (ret)
> - return ret;
> -
> - iio_evgen->regs[this_attr->address].reg_id = this_attr->address;
> - iio_evgen->regs[this_attr->address].reg_data = event;
> -
> - iio_evgen->handler.irq = iio_evgen->base + this_attr->address;
> - if (iio_evgen->enabled[this_attr->address])
> - irq_work_queue(&iio_evgen->handler.work);
> -
> - return len;
> -}
> -
> -static IIO_DEVICE_ATTR(poke_ev0, S_IWUSR, NULL, &iio_evgen_poke, 0);
> -static IIO_DEVICE_ATTR(poke_ev1, S_IWUSR, NULL, &iio_evgen_poke, 1);
> -static IIO_DEVICE_ATTR(poke_ev2, S_IWUSR, NULL, &iio_evgen_poke, 2);
> -static IIO_DEVICE_ATTR(poke_ev3, S_IWUSR, NULL, &iio_evgen_poke, 3);
> -static IIO_DEVICE_ATTR(poke_ev4, S_IWUSR, NULL, &iio_evgen_poke, 4);
> -static IIO_DEVICE_ATTR(poke_ev5, S_IWUSR, NULL, &iio_evgen_poke, 5);
> -static IIO_DEVICE_ATTR(poke_ev6, S_IWUSR, NULL, &iio_evgen_poke, 6);
> -static IIO_DEVICE_ATTR(poke_ev7, S_IWUSR, NULL, &iio_evgen_poke, 7);
> -static IIO_DEVICE_ATTR(poke_ev8, S_IWUSR, NULL, &iio_evgen_poke, 8);
> -static IIO_DEVICE_ATTR(poke_ev9, S_IWUSR, NULL, &iio_evgen_poke, 9);
> -
> -static struct attribute *iio_evgen_attrs[] = {
> - &iio_dev_attr_poke_ev0.dev_attr.attr,
> - &iio_dev_attr_poke_ev1.dev_attr.attr,
> - &iio_dev_attr_poke_ev2.dev_attr.attr,
> - &iio_dev_attr_poke_ev3.dev_attr.attr,
> - &iio_dev_attr_poke_ev4.dev_attr.attr,
> - &iio_dev_attr_poke_ev5.dev_attr.attr,
> - &iio_dev_attr_poke_ev6.dev_attr.attr,
> - &iio_dev_attr_poke_ev7.dev_attr.attr,
> - &iio_dev_attr_poke_ev8.dev_attr.attr,
> - &iio_dev_attr_poke_ev9.dev_attr.attr,
> - NULL,
> -};
> -
> -static const struct attribute_group iio_evgen_group = {
> - .attrs = iio_evgen_attrs,
> -};
> -
> -static const struct attribute_group *iio_evgen_groups[] = {
> - &iio_evgen_group,
> - NULL
> -};
> -
> -static struct device iio_evgen_dev = {
> - .bus = &iio_bus_type,
> - .groups = iio_evgen_groups,
> - .release = &iio_evgen_release,
> -};
> -
> -static __init int iio_dummy_evgen_init(void)
> -{
> - int ret = iio_dummy_evgen_create();
> -
> - if (ret < 0)
> - return ret;
> - device_initialize(&iio_evgen_dev);
> - dev_set_name(&iio_evgen_dev, "iio_evgen");
> - return device_add(&iio_evgen_dev);
> -}
> -module_init(iio_dummy_evgen_init);
> -
> -static __exit void iio_dummy_evgen_exit(void)
> -{
> - device_unregister(&iio_evgen_dev);
> -}
> -module_exit(iio_dummy_evgen_exit);
> -
> -MODULE_AUTHOR("Jonathan Cameron <jic23@xxxxxxxxxx>");
> -MODULE_DESCRIPTION("IIO dummy driver");
> -MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/iio/iio_dummy_evgen.h b/drivers/staging/iio/iio_dummy_evgen.h
> deleted file mode 100644
> index d044b94..0000000
> --- a/drivers/staging/iio/iio_dummy_evgen.h
> +++ /dev/null
> @@ -1,13 +0,0 @@
> -#ifndef _IIO_DUMMY_EVGEN_H_
> -#define _IIO_DUMMY_EVGEN_H_
> -
> -struct iio_dummy_regs {
> - u32 reg_id;
> - u32 reg_data;
> -};
> -
> -struct iio_dummy_regs *iio_dummy_evgen_get_regs(int irq);
> -int iio_dummy_evgen_get_irq(void);
> -void iio_dummy_evgen_release_irq(int irq);
> -
> -#endif /* _IIO_DUMMY_EVGEN_H_ */
> diff --git a/drivers/staging/iio/iio_simple_dummy.c b/drivers/staging/iio/iio_simple_dummy.c
> deleted file mode 100644
> index 381f90f..0000000
> --- a/drivers/staging/iio/iio_simple_dummy.c
> +++ /dev/null
> @@ -1,748 +0,0 @@
> -/**
> - * Copyright (c) 2011 Jonathan Cameron
> - *
> - * This program is free software; you can redistribute it and/or modify it
> - * under the terms of the GNU General Public License version 2 as published by
> - * the Free Software Foundation.
> - *
> - * A reference industrial I/O driver to illustrate the functionality available.
> - *
> - * There are numerous real drivers to illustrate the finer points.
> - * The purpose of this driver is to provide a driver with far more comments
> - * and explanatory notes than any 'real' driver would have.
> - * Anyone starting out writing an IIO driver should first make sure they
> - * understand all of this driver except those bits specifically marked
> - * as being present to allow us to 'fake' the presence of hardware.
> - */
> -#include <linux/kernel.h>
> -#include <linux/slab.h>
> -#include <linux/module.h>
> -
> -#include <linux/iio/iio.h>
> -#include <linux/iio/sysfs.h>
> -#include <linux/iio/events.h>
> -#include <linux/iio/buffer.h>
> -#include "iio_simple_dummy.h"
> -
> -/*
> - * A few elements needed to fake a bus for this driver
> - * Note instances parameter controls how many of these
> - * dummy devices are registered.
> - */
> -static unsigned instances = 1;
> -module_param(instances, uint, 0);
> -
> -/* Pointer array used to fake bus elements */
> -static struct iio_dev **iio_dummy_devs;
> -
> -/* Fake a name for the part number, usually obtained from the id table */
> -static const char *iio_dummy_part_number = "iio_dummy_part_no";
> -
> -/**
> - * struct iio_dummy_accel_calibscale - realworld to register mapping
> - * @val: first value in read_raw - here integer part.
> - * @val2: second value in read_raw etc - here micro part.
> - * @regval: register value - magic device specific numbers.
> - */
> -struct iio_dummy_accel_calibscale {
> - int val;
> - int val2;
> - int regval; /* what would be written to hardware */
> -};
> -
> -static const struct iio_dummy_accel_calibscale dummy_scales[] = {
> - { 0, 100, 0x8 }, /* 0.000100 */
> - { 0, 133, 0x7 }, /* 0.000133 */
> - { 733, 13, 0x9 }, /* 733.000013 */
> -};
> -
> -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> -
> -/*
> - * simple event - triggered when value rises above
> - * a threshold
> - */
> -static const struct iio_event_spec iio_dummy_event = {
> - .type = IIO_EV_TYPE_THRESH,
> - .dir = IIO_EV_DIR_RISING,
> - .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
> -};
> -
> -/*
> - * simple step detect event - triggered when a step is detected
> - */
> -static const struct iio_event_spec step_detect_event = {
> - .type = IIO_EV_TYPE_CHANGE,
> - .dir = IIO_EV_DIR_NONE,
> - .mask_separate = BIT(IIO_EV_INFO_ENABLE),
> -};
> -
> -/*
> - * simple transition event - triggered when the reported running confidence
> - * value rises above a threshold value
> - */
> -static const struct iio_event_spec iio_running_event = {
> - .type = IIO_EV_TYPE_THRESH,
> - .dir = IIO_EV_DIR_RISING,
> - .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
> -};
> -
> -/*
> - * simple transition event - triggered when the reported walking confidence
> - * value falls under a threshold value
> - */
> -static const struct iio_event_spec iio_walking_event = {
> - .type = IIO_EV_TYPE_THRESH,
> - .dir = IIO_EV_DIR_FALLING,
> - .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
> -};
> -#endif
> -
> -/*
> - * iio_dummy_channels - Description of available channels
> - *
> - * This array of structures tells the IIO core about what the device
> - * actually provides for a given channel.
> - */
> -static const struct iio_chan_spec iio_dummy_channels[] = {
> - /* indexed ADC channel in_voltage0_raw etc */
> - {
> - .type = IIO_VOLTAGE,
> - /* Channel has a numeric index of 0 */
> - .indexed = 1,
> - .channel = 0,
> - /* What other information is available? */
> - .info_mask_separate =
> - /*
> - * in_voltage0_raw
> - * Raw (unscaled no bias removal etc) measurement
> - * from the device.
> - */
> - BIT(IIO_CHAN_INFO_RAW) |
> - /*
> - * in_voltage0_offset
> - * Offset for userspace to apply prior to scale
> - * when converting to standard units (microvolts)
> - */
> - BIT(IIO_CHAN_INFO_OFFSET) |
> - /*
> - * in_voltage0_scale
> - * Multipler for userspace to apply post offset
> - * when converting to standard units (microvolts)
> - */
> - BIT(IIO_CHAN_INFO_SCALE),
> - /*
> - * sampling_frequency
> - * The frequency in Hz at which the channels are sampled
> - */
> - .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> - /* The ordering of elements in the buffer via an enum */
> - .scan_index = voltage0,
> - .scan_type = { /* Description of storage in buffer */
> - .sign = 'u', /* unsigned */
> - .realbits = 13, /* 13 bits */
> - .storagebits = 16, /* 16 bits used for storage */
> - .shift = 0, /* zero shift */
> - },
> -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> - .event_spec = &iio_dummy_event,
> - .num_event_specs = 1,
> -#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> - },
> - /* Differential ADC channel in_voltage1-voltage2_raw etc*/
> - {
> - .type = IIO_VOLTAGE,
> - .differential = 1,
> - /*
> - * Indexing for differential channels uses channel
> - * for the positive part, channel2 for the negative.
> - */
> - .indexed = 1,
> - .channel = 1,
> - .channel2 = 2,
> - /*
> - * in_voltage1-voltage2_raw
> - * Raw (unscaled no bias removal etc) measurement
> - * from the device.
> - */
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> - /*
> - * in_voltage-voltage_scale
> - * Shared version of scale - shared by differential
> - * input channels of type IIO_VOLTAGE.
> - */
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> - /*
> - * sampling_frequency
> - * The frequency in Hz at which the channels are sampled
> - */
> - .scan_index = diffvoltage1m2,
> - .scan_type = { /* Description of storage in buffer */
> - .sign = 's', /* signed */
> - .realbits = 12, /* 12 bits */
> - .storagebits = 16, /* 16 bits used for storage */
> - .shift = 0, /* zero shift */
> - },
> - },
> - /* Differential ADC channel in_voltage3-voltage4_raw etc*/
> - {
> - .type = IIO_VOLTAGE,
> - .differential = 1,
> - .indexed = 1,
> - .channel = 3,
> - .channel2 = 4,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> - .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> - .scan_index = diffvoltage3m4,
> - .scan_type = {
> - .sign = 's',
> - .realbits = 11,
> - .storagebits = 16,
> - .shift = 0,
> - },
> - },
> - /*
> - * 'modified' (i.e. axis specified) acceleration channel
> - * in_accel_z_raw
> - */
> - {
> - .type = IIO_ACCEL,
> - .modified = 1,
> - /* Channel 2 is use for modifiers */
> - .channel2 = IIO_MOD_X,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> - /*
> - * Internal bias and gain correction values. Applied
> - * by the hardware or driver prior to userspace
> - * seeing the readings. Typically part of hardware
> - * calibration.
> - */
> - BIT(IIO_CHAN_INFO_CALIBSCALE) |
> - BIT(IIO_CHAN_INFO_CALIBBIAS),
> - .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ),
> - .scan_index = accelx,
> - .scan_type = { /* Description of storage in buffer */
> - .sign = 's', /* signed */
> - .realbits = 16, /* 16 bits */
> - .storagebits = 16, /* 16 bits used for storage */
> - .shift = 0, /* zero shift */
> - },
> - },
> - /*
> - * Convenience macro for timestamps. 4 is the index in
> - * the buffer.
> - */
> - IIO_CHAN_SOFT_TIMESTAMP(4),
> - /* DAC channel out_voltage0_raw */
> - {
> - .type = IIO_VOLTAGE,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> - .scan_index = -1, /* No buffer support */
> - .output = 1,
> - .indexed = 1,
> - .channel = 0,
> - },
> - {
> - .type = IIO_STEPS,
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_ENABLE) |
> - BIT(IIO_CHAN_INFO_CALIBHEIGHT),
> - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> - .scan_index = -1, /* No buffer support */
> -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> - .event_spec = &step_detect_event,
> - .num_event_specs = 1,
> -#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> - },
> - {
> - .type = IIO_ACTIVITY,
> - .modified = 1,
> - .channel2 = IIO_MOD_RUNNING,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> - .scan_index = -1, /* No buffer support */
> -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> - .event_spec = &iio_running_event,
> - .num_event_specs = 1,
> -#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> - },
> - {
> - .type = IIO_ACTIVITY,
> - .modified = 1,
> - .channel2 = IIO_MOD_WALKING,
> - .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
> - .scan_index = -1, /* No buffer support */
> -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> - .event_spec = &iio_walking_event,
> - .num_event_specs = 1,
> -#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> - },
> -};
> -
> -/**
> - * iio_dummy_read_raw() - data read function.
> - * @indio_dev: the struct iio_dev associated with this device instance
> - * @chan: the channel whose data is to be read
> - * @val: first element of returned value (typically INT)
> - * @val2: second element of returned value (typically MICRO)
> - * @mask: what we actually want to read as per the info_mask_*
> - * in iio_chan_spec.
> - */
> -static int iio_dummy_read_raw(struct iio_dev *indio_dev,
> - struct iio_chan_spec const *chan,
> - int *val,
> - int *val2,
> - long mask)
> -{
> - struct iio_dummy_state *st = iio_priv(indio_dev);
> - int ret = -EINVAL;
> -
> - mutex_lock(&st->lock);
> - switch (mask) {
> - case IIO_CHAN_INFO_RAW: /* magic value - channel value read */
> - switch (chan->type) {
> - case IIO_VOLTAGE:
> - if (chan->output) {
> - /* Set integer part to cached value */
> - *val = st->dac_val;
> - ret = IIO_VAL_INT;
> - } else if (chan->differential) {
> - if (chan->channel == 1)
> - *val = st->differential_adc_val[0];
> - else
> - *val = st->differential_adc_val[1];
> - ret = IIO_VAL_INT;
> - } else {
> - *val = st->single_ended_adc_val;
> - ret = IIO_VAL_INT;
> - }
> - break;
> - case IIO_ACCEL:
> - *val = st->accel_val;
> - ret = IIO_VAL_INT;
> - break;
> - default:
> - break;
> - }
> - break;
> - case IIO_CHAN_INFO_PROCESSED:
> - switch (chan->type) {
> - case IIO_STEPS:
> - *val = st->steps;
> - ret = IIO_VAL_INT;
> - break;
> - case IIO_ACTIVITY:
> - switch (chan->channel2) {
> - case IIO_MOD_RUNNING:
> - *val = st->activity_running;
> - ret = IIO_VAL_INT;
> - break;
> - case IIO_MOD_WALKING:
> - *val = st->activity_walking;
> - ret = IIO_VAL_INT;
> - break;
> - default:
> - break;
> - }
> - break;
> - default:
> - break;
> - }
> - break;
> - case IIO_CHAN_INFO_OFFSET:
> - /* only single ended adc -> 7 */
> - *val = 7;
> - ret = IIO_VAL_INT;
> - break;
> - case IIO_CHAN_INFO_SCALE:
> - switch (chan->type) {
> - case IIO_VOLTAGE:
> - switch (chan->differential) {
> - case 0:
> - /* only single ended adc -> 0.001333 */
> - *val = 0;
> - *val2 = 1333;
> - ret = IIO_VAL_INT_PLUS_MICRO;
> - break;
> - case 1:
> - /* all differential adc channels ->
> - * 0.000001344 */
> - *val = 0;
> - *val2 = 1344;
> - ret = IIO_VAL_INT_PLUS_NANO;
> - }
> - break;
> - default:
> - break;
> - }
> - break;
> - case IIO_CHAN_INFO_CALIBBIAS:
> - /* only the acceleration axis - read from cache */
> - *val = st->accel_calibbias;
> - ret = IIO_VAL_INT;
> - break;
> - case IIO_CHAN_INFO_CALIBSCALE:
> - *val = st->accel_calibscale->val;
> - *val2 = st->accel_calibscale->val2;
> - ret = IIO_VAL_INT_PLUS_MICRO;
> - break;
> - case IIO_CHAN_INFO_SAMP_FREQ:
> - *val = 3;
> - *val2 = 33;
> - ret = IIO_VAL_INT_PLUS_NANO;
> - break;
> - case IIO_CHAN_INFO_ENABLE:
> - switch (chan->type) {
> - case IIO_STEPS:
> - *val = st->steps_enabled;
> - ret = IIO_VAL_INT;
> - break;
> - default:
> - break;
> - }
> - break;
> - case IIO_CHAN_INFO_CALIBHEIGHT:
> - switch (chan->type) {
> - case IIO_STEPS:
> - *val = st->height;
> - ret = IIO_VAL_INT;
> - break;
> - default:
> - break;
> - }
> - break;
> -
> - default:
> - break;
> - }
> - mutex_unlock(&st->lock);
> - return ret;
> -}
> -
> -/**
> - * iio_dummy_write_raw() - data write function.
> - * @indio_dev: the struct iio_dev associated with this device instance
> - * @chan: the channel whose data is to be written
> - * @val: first element of value to set (typically INT)
> - * @val2: second element of value to set (typically MICRO)
> - * @mask: what we actually want to write as per the info_mask_*
> - * in iio_chan_spec.
> - *
> - * Note that all raw writes are assumed IIO_VAL_INT and info mask elements
> - * are assumed to be IIO_INT_PLUS_MICRO unless the callback write_raw_get_fmt
> - * in struct iio_info is provided by the driver.
> - */
> -static int iio_dummy_write_raw(struct iio_dev *indio_dev,
> - struct iio_chan_spec const *chan,
> - int val,
> - int val2,
> - long mask)
> -{
> - int i;
> - int ret = 0;
> - struct iio_dummy_state *st = iio_priv(indio_dev);
> -
> - switch (mask) {
> - case IIO_CHAN_INFO_RAW:
> - switch (chan->type) {
> - case IIO_VOLTAGE:
> - if (chan->output == 0)
> - return -EINVAL;
> -
> - /* Locking not required as writing single value */
> - mutex_lock(&st->lock);
> - st->dac_val = val;
> - mutex_unlock(&st->lock);
> - return 0;
> - default:
> - return -EINVAL;
> - }
> - case IIO_CHAN_INFO_PROCESSED:
> - switch (chan->type) {
> - case IIO_STEPS:
> - mutex_lock(&st->lock);
> - st->steps = val;
> - mutex_unlock(&st->lock);
> - return 0;
> - case IIO_ACTIVITY:
> - if (val < 0)
> - val = 0;
> - if (val > 100)
> - val = 100;
> - switch (chan->channel2) {
> - case IIO_MOD_RUNNING:
> - st->activity_running = val;
> - return 0;
> - case IIO_MOD_WALKING:
> - st->activity_walking = val;
> - return 0;
> - default:
> - return -EINVAL;
> - }
> - break;
> - default:
> - return -EINVAL;
> - }
> - case IIO_CHAN_INFO_CALIBSCALE:
> - mutex_lock(&st->lock);
> - /* Compare against table - hard matching here */
> - for (i = 0; i < ARRAY_SIZE(dummy_scales); i++)
> - if (val == dummy_scales[i].val &&
> - val2 == dummy_scales[i].val2)
> - break;
> - if (i == ARRAY_SIZE(dummy_scales))
> - ret = -EINVAL;
> - else
> - st->accel_calibscale = &dummy_scales[i];
> - mutex_unlock(&st->lock);
> - return ret;
> - case IIO_CHAN_INFO_CALIBBIAS:
> - mutex_lock(&st->lock);
> - st->accel_calibbias = val;
> - mutex_unlock(&st->lock);
> - return 0;
> - case IIO_CHAN_INFO_ENABLE:
> - switch (chan->type) {
> - case IIO_STEPS:
> - mutex_lock(&st->lock);
> - st->steps_enabled = val;
> - mutex_unlock(&st->lock);
> - return 0;
> - default:
> - return -EINVAL;
> - }
> - case IIO_CHAN_INFO_CALIBHEIGHT:
> - switch (chan->type) {
> - case IIO_STEPS:
> - st->height = val;
> - return 0;
> - default:
> - return -EINVAL;
> - }
> -
> - default:
> - return -EINVAL;
> - }
> -}
> -
> -/*
> - * Device type specific information.
> - */
> -static const struct iio_info iio_dummy_info = {
> - .driver_module = THIS_MODULE,
> - .read_raw = &iio_dummy_read_raw,
> - .write_raw = &iio_dummy_write_raw,
> -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> - .read_event_config = &iio_simple_dummy_read_event_config,
> - .write_event_config = &iio_simple_dummy_write_event_config,
> - .read_event_value = &iio_simple_dummy_read_event_value,
> - .write_event_value = &iio_simple_dummy_write_event_value,
> -#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> -};
> -
> -/**
> - * iio_dummy_init_device() - device instance specific init
> - * @indio_dev: the iio device structure
> - *
> - * Most drivers have one of these to set up default values,
> - * reset the device to known state etc.
> - */
> -static int iio_dummy_init_device(struct iio_dev *indio_dev)
> -{
> - struct iio_dummy_state *st = iio_priv(indio_dev);
> -
> - st->dac_val = 0;
> - st->single_ended_adc_val = 73;
> - st->differential_adc_val[0] = 33;
> - st->differential_adc_val[1] = -34;
> - st->accel_val = 34;
> - st->accel_calibbias = -7;
> - st->accel_calibscale = &dummy_scales[0];
> - st->steps = 47;
> - st->activity_running = 98;
> - st->activity_walking = 4;
> -
> - return 0;
> -}
> -
> -/**
> - * iio_dummy_probe() - device instance probe
> - * @index: an id number for this instance.
> - *
> - * Arguments are bus type specific.
> - * I2C: iio_dummy_probe(struct i2c_client *client,
> - * const struct i2c_device_id *id)
> - * SPI: iio_dummy_probe(struct spi_device *spi)
> - */
> -static int iio_dummy_probe(int index)
> -{
> - int ret;
> - struct iio_dev *indio_dev;
> - struct iio_dummy_state *st;
> -
> - /*
> - * Allocate an IIO device.
> - *
> - * This structure contains all generic state
> - * information about the device instance.
> - * It also has a region (accessed by iio_priv()
> - * for chip specific state information.
> - */
> - indio_dev = iio_device_alloc(sizeof(*st));
> - if (!indio_dev) {
> - ret = -ENOMEM;
> - goto error_ret;
> - }
> -
> - st = iio_priv(indio_dev);
> - mutex_init(&st->lock);
> -
> - iio_dummy_init_device(indio_dev);
> - /*
> - * With hardware: Set the parent device.
> - * indio_dev->dev.parent = &spi->dev;
> - * indio_dev->dev.parent = &client->dev;
> - */
> -
> - /*
> - * Make the iio_dev struct available to remove function.
> - * Bus equivalents
> - * i2c_set_clientdata(client, indio_dev);
> - * spi_set_drvdata(spi, indio_dev);
> - */
> - iio_dummy_devs[index] = indio_dev;
> -
> - /*
> - * Set the device name.
> - *
> - * This is typically a part number and obtained from the module
> - * id table.
> - * e.g. for i2c and spi:
> - * indio_dev->name = id->name;
> - * indio_dev->name = spi_get_device_id(spi)->name;
> - */
> - indio_dev->name = iio_dummy_part_number;
> -
> - /* Provide description of available channels */
> - indio_dev->channels = iio_dummy_channels;
> - indio_dev->num_channels = ARRAY_SIZE(iio_dummy_channels);
> -
> - /*
> - * Provide device type specific interface functions and
> - * constant data.
> - */
> - indio_dev->info = &iio_dummy_info;
> -
> - /* Specify that device provides sysfs type interfaces */
> - indio_dev->modes = INDIO_DIRECT_MODE;
> -
> - ret = iio_simple_dummy_events_register(indio_dev);
> - if (ret < 0)
> - goto error_free_device;
> -
> - ret = iio_simple_dummy_configure_buffer(indio_dev);
> - if (ret < 0)
> - goto error_unregister_events;
> -
> - ret = iio_device_register(indio_dev);
> - if (ret < 0)
> - goto error_unconfigure_buffer;
> -
> - return 0;
> -error_unconfigure_buffer:
> - iio_simple_dummy_unconfigure_buffer(indio_dev);
> -error_unregister_events:
> - iio_simple_dummy_events_unregister(indio_dev);
> -error_free_device:
> - iio_device_free(indio_dev);
> -error_ret:
> - return ret;
> -}
> -
> -/**
> - * iio_dummy_remove() - device instance removal function
> - * @index: device index.
> - *
> - * Parameters follow those of iio_dummy_probe for buses.
> - */
> -static void iio_dummy_remove(int index)
> -{
> - /*
> - * Get a pointer to the device instance iio_dev structure
> - * from the bus subsystem. E.g.
> - * struct iio_dev *indio_dev = i2c_get_clientdata(client);
> - * struct iio_dev *indio_dev = spi_get_drvdata(spi);
> - */
> - struct iio_dev *indio_dev = iio_dummy_devs[index];
> -
> - /* Unregister the device */
> - iio_device_unregister(indio_dev);
> -
> - /* Device specific code to power down etc */
> -
> - /* Buffered capture related cleanup */
> - iio_simple_dummy_unconfigure_buffer(indio_dev);
> -
> - iio_simple_dummy_events_unregister(indio_dev);
> -
> - /* Free all structures */
> - iio_device_free(indio_dev);
> -}
> -
> -/**
> - * iio_dummy_init() - device driver registration
> - *
> - * Varies depending on bus type of the device. As there is no device
> - * here, call probe directly. For information on device registration
> - * i2c:
> - * Documentation/i2c/writing-clients
> - * spi:
> - * Documentation/spi/spi-summary
> - */
> -static __init int iio_dummy_init(void)
> -{
> - int i, ret;
> -
> - if (instances > 10) {
> - instances = 1;
> - return -EINVAL;
> - }
> -
> - /* Fake a bus */
> - iio_dummy_devs = kcalloc(instances, sizeof(*iio_dummy_devs),
> - GFP_KERNEL);
> - /* Here we have no actual device so call probe */
> - for (i = 0; i < instances; i++) {
> - ret = iio_dummy_probe(i);
> - if (ret < 0)
> - goto error_remove_devs;
> - }
> - return 0;
> -
> -error_remove_devs:
> - while (i--)
> - iio_dummy_remove(i);
> -
> - kfree(iio_dummy_devs);
> - return ret;
> -}
> -module_init(iio_dummy_init);
> -
> -/**
> - * iio_dummy_exit() - device driver removal
> - *
> - * Varies depending on bus type of the device.
> - * As there is no device here, call remove directly.
> - */
> -static __exit void iio_dummy_exit(void)
> -{
> - int i;
> -
> - for (i = 0; i < instances; i++)
> - iio_dummy_remove(i);
> - kfree(iio_dummy_devs);
> -}
> -module_exit(iio_dummy_exit);
> -
> -MODULE_AUTHOR("Jonathan Cameron <jic23@xxxxxxxxxx>");
> -MODULE_DESCRIPTION("IIO dummy driver");
> -MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/iio/iio_simple_dummy.h b/drivers/staging/iio/iio_simple_dummy.h
> deleted file mode 100644
> index 5c2f4d0..0000000
> --- a/drivers/staging/iio/iio_simple_dummy.h
> +++ /dev/null
> @@ -1,129 +0,0 @@
> -/**
> - * Copyright (c) 2011 Jonathan Cameron
> - *
> - * This program is free software; you can redistribute it and/or modify it
> - * under the terms of the GNU General Public License version 2 as published by
> - * the Free Software Foundation.
> - *
> - * Join together the various functionality of iio_simple_dummy driver
> - */
> -
> -#ifndef _IIO_SIMPLE_DUMMY_H_
> -#define _IIO_SIMPLE_DUMMY_H_
> -#include <linux/kernel.h>
> -
> -struct iio_dummy_accel_calibscale;
> -struct iio_dummy_regs;
> -
> -/**
> - * struct iio_dummy_state - device instance specific state.
> - * @dac_val: cache for dac value
> - * @single_ended_adc_val: cache for single ended adc value
> - * @differential_adc_val: cache for differential adc value
> - * @accel_val: cache for acceleration value
> - * @accel_calibbias: cache for acceleration calibbias
> - * @accel_calibscale: cache for acceleration calibscale
> - * @lock: lock to ensure state is consistent
> - * @event_irq: irq number for event line (faked)
> - * @event_val: cache for event threshold value
> - * @event_en: cache of whether event is enabled
> - */
> -struct iio_dummy_state {
> - int dac_val;
> - int single_ended_adc_val;
> - int differential_adc_val[2];
> - int accel_val;
> - int accel_calibbias;
> - int activity_running;
> - int activity_walking;
> - const struct iio_dummy_accel_calibscale *accel_calibscale;
> - struct mutex lock;
> - struct iio_dummy_regs *regs;
> - int steps_enabled;
> - int steps;
> - int height;
> -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> - int event_irq;
> - int event_val;
> - bool event_en;
> - s64 event_timestamp;
> -#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS */
> -};
> -
> -#ifdef CONFIG_IIO_SIMPLE_DUMMY_EVENTS
> -
> -struct iio_dev;
> -
> -int iio_simple_dummy_read_event_config(struct iio_dev *indio_dev,
> - const struct iio_chan_spec *chan,
> - enum iio_event_type type,
> - enum iio_event_direction dir);
> -
> -int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
> - const struct iio_chan_spec *chan,
> - enum iio_event_type type,
> - enum iio_event_direction dir,
> - int state);
> -
> -int iio_simple_dummy_read_event_value(struct iio_dev *indio_dev,
> - const struct iio_chan_spec *chan,
> - enum iio_event_type type,
> - enum iio_event_direction dir,
> - enum iio_event_info info, int *val,
> - int *val2);
> -
> -int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev,
> - const struct iio_chan_spec *chan,
> - enum iio_event_type type,
> - enum iio_event_direction dir,
> - enum iio_event_info info, int val,
> - int val2);
> -
> -int iio_simple_dummy_events_register(struct iio_dev *indio_dev);
> -void iio_simple_dummy_events_unregister(struct iio_dev *indio_dev);
> -
> -#else /* Stubs for when events are disabled at compile time */
> -
> -static inline int
> -iio_simple_dummy_events_register(struct iio_dev *indio_dev)
> -{
> - return 0;
> -};
> -
> -static inline void
> -iio_simple_dummy_events_unregister(struct iio_dev *indio_dev)
> -{ };
> -
> -#endif /* CONFIG_IIO_SIMPLE_DUMMY_EVENTS*/
> -
> -/**
> - * enum iio_simple_dummy_scan_elements - scan index enum
> - * @voltage0: the single ended voltage channel
> - * @diffvoltage1m2: first differential channel
> - * @diffvoltage3m4: second differenial channel
> - * @accelx: acceleration channel
> - *
> - * Enum provides convenient numbering for the scan index.
> - */
> -enum iio_simple_dummy_scan_elements {
> - voltage0,
> - diffvoltage1m2,
> - diffvoltage3m4,
> - accelx,
> -};
> -
> -#ifdef CONFIG_IIO_SIMPLE_DUMMY_BUFFER
> -int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev);
> -void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev);
> -#else
> -static inline int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev)
> -{
> - return 0;
> -};
> -
> -static inline
> -void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev)
> -{};
> -
> -#endif /* CONFIG_IIO_SIMPLE_DUMMY_BUFFER */
> -#endif /* _IIO_SIMPLE_DUMMY_H_ */
> diff --git a/drivers/staging/iio/iio_simple_dummy_buffer.c b/drivers/staging/iio/iio_simple_dummy_buffer.c
> deleted file mode 100644
> index 00ed774..0000000
> --- a/drivers/staging/iio/iio_simple_dummy_buffer.c
> +++ /dev/null
> @@ -1,192 +0,0 @@
> -/**
> - * Copyright (c) 2011 Jonathan Cameron
> - *
> - * This program is free software; you can redistribute it and/or modify it
> - * under the terms of the GNU General Public License version 2 as published by
> - * the Free Software Foundation.
> - *
> - * Buffer handling elements of industrial I/O reference driver.
> - * Uses the kfifo buffer.
> - *
> - * To test without hardware use the sysfs trigger.
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/export.h>
> -#include <linux/slab.h>
> -#include <linux/interrupt.h>
> -#include <linux/irq.h>
> -#include <linux/bitmap.h>
> -
> -#include <linux/iio/iio.h>
> -#include <linux/iio/trigger_consumer.h>
> -#include <linux/iio/kfifo_buf.h>
> -
> -#include "iio_simple_dummy.h"
> -
> -/* Some fake data */
> -
> -static const s16 fakedata[] = {
> - [voltage0] = 7,
> - [diffvoltage1m2] = -33,
> - [diffvoltage3m4] = -2,
> - [accelx] = 344,
> -};
> -
> -/**
> - * iio_simple_dummy_trigger_h() - the trigger handler function
> - * @irq: the interrupt number
> - * @p: private data - always a pointer to the poll func.
> - *
> - * This is the guts of buffered capture. On a trigger event occurring,
> - * if the pollfunc is attached then this handler is called as a threaded
> - * interrupt (and hence may sleep). It is responsible for grabbing data
> - * from the device and pushing it into the associated buffer.
> - */
> -static irqreturn_t iio_simple_dummy_trigger_h(int irq, void *p)
> -{
> - struct iio_poll_func *pf = p;
> - struct iio_dev *indio_dev = pf->indio_dev;
> - int len = 0;
> - u16 *data;
> -
> - data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
> - if (!data)
> - goto done;
> -
> - if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) {
> - /*
> - * Three common options here:
> - * hardware scans: certain combinations of channels make
> - * up a fast read. The capture will consist of all of them.
> - * Hence we just call the grab data function and fill the
> - * buffer without processing.
> - * software scans: can be considered to be random access
> - * so efficient reading is just a case of minimal bus
> - * transactions.
> - * software culled hardware scans:
> - * occasionally a driver may process the nearest hardware
> - * scan to avoid storing elements that are not desired. This
> - * is the fiddliest option by far.
> - * Here let's pretend we have random access. And the values are
> - * in the constant table fakedata.
> - */
> - int i, j;
> -
> - for (i = 0, j = 0;
> - i < bitmap_weight(indio_dev->active_scan_mask,
> - indio_dev->masklength);
> - i++, j++) {
> - j = find_next_bit(indio_dev->active_scan_mask,
> - indio_dev->masklength, j);
> - /* random access read from the 'device' */
> - data[i] = fakedata[j];
> - len += 2;
> - }
> - }
> -
> - iio_push_to_buffers_with_timestamp(indio_dev, data, iio_get_time_ns());
> -
> - kfree(data);
> -
> -done:
> - /*
> - * Tell the core we are done with this trigger and ready for the
> - * next one.
> - */
> - iio_trigger_notify_done(indio_dev->trig);
> -
> - return IRQ_HANDLED;
> -}
> -
> -static const struct iio_buffer_setup_ops iio_simple_dummy_buffer_setup_ops = {
> - /*
> - * iio_triggered_buffer_postenable:
> - * Generic function that simply attaches the pollfunc to the trigger.
> - * Replace this to mess with hardware state before we attach the
> - * trigger.
> - */
> - .postenable = &iio_triggered_buffer_postenable,
> - /*
> - * iio_triggered_buffer_predisable:
> - * Generic function that simple detaches the pollfunc from the trigger.
> - * Replace this to put hardware state back again after the trigger is
> - * detached but before userspace knows we have disabled the ring.
> - */
> - .predisable = &iio_triggered_buffer_predisable,
> -};
> -
> -int iio_simple_dummy_configure_buffer(struct iio_dev *indio_dev)
> -{
> - int ret;
> - struct iio_buffer *buffer;
> -
> - /* Allocate a buffer to use - here a kfifo */
> - buffer = iio_kfifo_allocate();
> - if (!buffer) {
> - ret = -ENOMEM;
> - goto error_ret;
> - }
> -
> - iio_device_attach_buffer(indio_dev, buffer);
> -
> - /* Enable timestamps by default */
> - buffer->scan_timestamp = true;
> -
> - /*
> - * Tell the core what device type specific functions should
> - * be run on either side of buffer capture enable / disable.
> - */
> - indio_dev->setup_ops = &iio_simple_dummy_buffer_setup_ops;
> -
> - /*
> - * Configure a polling function.
> - * When a trigger event with this polling function connected
> - * occurs, this function is run. Typically this grabs data
> - * from the device.
> - *
> - * NULL for the bottom half. This is normally implemented only if we
> - * either want to ping a capture now pin (no sleeping) or grab
> - * a timestamp as close as possible to a data ready trigger firing.
> - *
> - * IRQF_ONESHOT ensures irqs are masked such that only one instance
> - * of the handler can run at a time.
> - *
> - * "iio_simple_dummy_consumer%d" formatting string for the irq 'name'
> - * as seen under /proc/interrupts. Remaining parameters as per printk.
> - */
> - indio_dev->pollfunc = iio_alloc_pollfunc(NULL,
> - &iio_simple_dummy_trigger_h,
> - IRQF_ONESHOT,
> - indio_dev,
> - "iio_simple_dummy_consumer%d",
> - indio_dev->id);
> -
> - if (!indio_dev->pollfunc) {
> - ret = -ENOMEM;
> - goto error_free_buffer;
> - }
> -
> - /*
> - * Notify the core that this device is capable of buffered capture
> - * driven by a trigger.
> - */
> - indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
> -
> - return 0;
> -
> -error_free_buffer:
> - iio_kfifo_free(indio_dev->buffer);
> -error_ret:
> - return ret;
> -}
> -
> -/**
> - * iio_simple_dummy_unconfigure_buffer() - release buffer resources
> - * @indo_dev: device instance state
> - */
> -void iio_simple_dummy_unconfigure_buffer(struct iio_dev *indio_dev)
> -{
> - iio_dealloc_pollfunc(indio_dev->pollfunc);
> - iio_kfifo_free(indio_dev->buffer);
> -}
> diff --git a/drivers/staging/iio/iio_simple_dummy_events.c b/drivers/staging/iio/iio_simple_dummy_events.c
> deleted file mode 100644
> index bfbf1c5..0000000
> --- a/drivers/staging/iio/iio_simple_dummy_events.c
> +++ /dev/null
> @@ -1,276 +0,0 @@
> -/**
> - * Copyright (c) 2011 Jonathan Cameron
> - *
> - * This program is free software; you can redistribute it and/or modify it
> - * under the terms of the GNU General Public License version 2 as published by
> - * the Free Software Foundation.
> - *
> - * Event handling elements of industrial I/O reference driver.
> - */
> -#include <linux/kernel.h>
> -#include <linux/slab.h>
> -#include <linux/interrupt.h>
> -#include <linux/irq.h>
> -
> -#include <linux/iio/iio.h>
> -#include <linux/iio/sysfs.h>
> -#include <linux/iio/events.h>
> -#include "iio_simple_dummy.h"
> -
> -/* Evgen 'fakes' interrupt events for this example */
> -#include "iio_dummy_evgen.h"
> -
> -/**
> - * iio_simple_dummy_read_event_config() - is event enabled?
> - * @indio_dev: the device instance data
> - * @chan: channel for the event whose state is being queried
> - * @type: type of the event whose state is being queried
> - * @dir: direction of the vent whose state is being queried
> - *
> - * This function would normally query the relevant registers or a cache to
> - * discover if the event generation is enabled on the device.
> - */
> -int iio_simple_dummy_read_event_config(struct iio_dev *indio_dev,
> - const struct iio_chan_spec *chan,
> - enum iio_event_type type,
> - enum iio_event_direction dir)
> -{
> - struct iio_dummy_state *st = iio_priv(indio_dev);
> -
> - return st->event_en;
> -}
> -
> -/**
> - * iio_simple_dummy_write_event_config() - set whether event is enabled
> - * @indio_dev: the device instance data
> - * @chan: channel for the event whose state is being set
> - * @type: type of the event whose state is being set
> - * @dir: direction of the vent whose state is being set
> - * @state: whether to enable or disable the device.
> - *
> - * This function would normally set the relevant registers on the devices
> - * so that it generates the specified event. Here it just sets up a cached
> - * value.
> - */
> -int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
> - const struct iio_chan_spec *chan,
> - enum iio_event_type type,
> - enum iio_event_direction dir,
> - int state)
> -{
> - struct iio_dummy_state *st = iio_priv(indio_dev);
> -
> - /*
> - * Deliberately over the top code splitting to illustrate
> - * how this is done when multiple events exist.
> - */
> - switch (chan->type) {
> - case IIO_VOLTAGE:
> - switch (type) {
> - case IIO_EV_TYPE_THRESH:
> - if (dir == IIO_EV_DIR_RISING)
> - st->event_en = state;
> - else
> - return -EINVAL;
> - default:
> - return -EINVAL;
> - }
> - break;
> - case IIO_ACTIVITY:
> - switch (type) {
> - case IIO_EV_TYPE_THRESH:
> - st->event_en = state;
> - break;
> - default:
> - return -EINVAL;
> - }
> - break;
> - case IIO_STEPS:
> - switch (type) {
> - case IIO_EV_TYPE_CHANGE:
> - st->event_en = state;
> - break;
> - default:
> - return -EINVAL;
> - }
> - break;
> - default:
> - return -EINVAL;
> - }
> -
> - return 0;
> -}
> -
> -/**
> - * iio_simple_dummy_read_event_value() - get value associated with event
> - * @indio_dev: device instance specific data
> - * @chan: channel for the event whose value is being read
> - * @type: type of the event whose value is being read
> - * @dir: direction of the vent whose value is being read
> - * @info: info type of the event whose value is being read
> - * @val: value for the event code.
> - *
> - * Many devices provide a large set of events of which only a subset may
> - * be enabled at a time, with value registers whose meaning changes depending
> - * on the event enabled. This often means that the driver must cache the values
> - * associated with each possible events so that the right value is in place when
> - * the enabled event is changed.
> - */
> -int iio_simple_dummy_read_event_value(struct iio_dev *indio_dev,
> - const struct iio_chan_spec *chan,
> - enum iio_event_type type,
> - enum iio_event_direction dir,
> - enum iio_event_info info,
> - int *val, int *val2)
> -{
> - struct iio_dummy_state *st = iio_priv(indio_dev);
> -
> - *val = st->event_val;
> -
> - return IIO_VAL_INT;
> -}
> -
> -/**
> - * iio_simple_dummy_write_event_value() - set value associate with event
> - * @indio_dev: device instance specific data
> - * @chan: channel for the event whose value is being set
> - * @type: type of the event whose value is being set
> - * @dir: direction of the vent whose value is being set
> - * @info: info type of the event whose value is being set
> - * @val: the value to be set.
> - */
> -int iio_simple_dummy_write_event_value(struct iio_dev *indio_dev,
> - const struct iio_chan_spec *chan,
> - enum iio_event_type type,
> - enum iio_event_direction dir,
> - enum iio_event_info info,
> - int val, int val2)
> -{
> - struct iio_dummy_state *st = iio_priv(indio_dev);
> -
> - st->event_val = val;
> -
> - return 0;
> -}
> -
> -static irqreturn_t iio_simple_dummy_get_timestamp(int irq, void *private)
> -{
> - struct iio_dev *indio_dev = private;
> - struct iio_dummy_state *st = iio_priv(indio_dev);
> -
> - st->event_timestamp = iio_get_time_ns();
> - return IRQ_HANDLED;
> -}
> -
> -/**
> - * iio_simple_dummy_event_handler() - identify and pass on event
> - * @irq: irq of event line
> - * @private: pointer to device instance state.
> - *
> - * This handler is responsible for querying the device to find out what
> - * event occurred and for then pushing that event towards userspace.
> - * Here only one event occurs so we push that directly on with locally
> - * grabbed timestamp.
> - */
> -static irqreturn_t iio_simple_dummy_event_handler(int irq, void *private)
> -{
> - struct iio_dev *indio_dev = private;
> - struct iio_dummy_state *st = iio_priv(indio_dev);
> -
> - dev_dbg(&indio_dev->dev, "id %x event %x\n",
> - st->regs->reg_id, st->regs->reg_data);
> -
> - switch (st->regs->reg_data) {
> - case 0:
> - iio_push_event(indio_dev,
> - IIO_EVENT_CODE(IIO_VOLTAGE, 0, 0,
> - IIO_EV_DIR_RISING,
> - IIO_EV_TYPE_THRESH, 0, 0, 0),
> - st->event_timestamp);
> - break;
> - case 1:
> - if (st->activity_running > st->event_val)
> - iio_push_event(indio_dev,
> - IIO_EVENT_CODE(IIO_ACTIVITY, 0,
> - IIO_MOD_RUNNING,
> - IIO_EV_DIR_RISING,
> - IIO_EV_TYPE_THRESH,
> - 0, 0, 0),
> - st->event_timestamp);
> - break;
> - case 2:
> - if (st->activity_walking < st->event_val)
> - iio_push_event(indio_dev,
> - IIO_EVENT_CODE(IIO_ACTIVITY, 0,
> - IIO_MOD_WALKING,
> - IIO_EV_DIR_FALLING,
> - IIO_EV_TYPE_THRESH,
> - 0, 0, 0),
> - st->event_timestamp);
> - break;
> - case 3:
> - iio_push_event(indio_dev,
> - IIO_EVENT_CODE(IIO_STEPS, 0, IIO_NO_MOD,
> - IIO_EV_DIR_NONE,
> - IIO_EV_TYPE_CHANGE, 0, 0, 0),
> - st->event_timestamp);
> - break;
> - default:
> - break;
> - }
> -
> - return IRQ_HANDLED;
> -}
> -
> -/**
> - * iio_simple_dummy_events_register() - setup interrupt handling for events
> - * @indio_dev: device instance data
> - *
> - * This function requests the threaded interrupt to handle the events.
> - * Normally the irq is a hardware interrupt and the number comes
> - * from board configuration files. Here we get it from a companion
> - * module that fakes the interrupt for us. Note that module in
> - * no way forms part of this example. Just assume that events magically
> - * appear via the provided interrupt.
> - */
> -int iio_simple_dummy_events_register(struct iio_dev *indio_dev)
> -{
> - struct iio_dummy_state *st = iio_priv(indio_dev);
> - int ret;
> -
> - /* Fire up event source - normally not present */
> - st->event_irq = iio_dummy_evgen_get_irq();
> - if (st->event_irq < 0) {
> - ret = st->event_irq;
> - goto error_ret;
> - }
> - st->regs = iio_dummy_evgen_get_regs(st->event_irq);
> -
> - ret = request_threaded_irq(st->event_irq,
> - &iio_simple_dummy_get_timestamp,
> - &iio_simple_dummy_event_handler,
> - IRQF_ONESHOT,
> - "iio_simple_event",
> - indio_dev);
> - if (ret < 0)
> - goto error_free_evgen;
> - return 0;
> -
> -error_free_evgen:
> - iio_dummy_evgen_release_irq(st->event_irq);
> -error_ret:
> - return ret;
> -}
> -
> -/**
> - * iio_simple_dummy_events_unregister() - tidy up interrupt handling on remove
> - * @indio_dev: device instance data
> - */
> -void iio_simple_dummy_events_unregister(struct iio_dev *indio_dev)
> -{
> - struct iio_dummy_state *st = iio_priv(indio_dev);
> -
> - free_irq(st->event_irq, indio_dev);
> - /* Not part of normal driver */
> - iio_dummy_evgen_release_irq(st->event_irq);
> -}
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Jonathan Cameron: "Re: [PATCH 1/2] iio: adc: mcp320x: Deprecated compatible strings with no vendor prefix"
Previous message: Oleg Nesterov: "Re: + signal-turn-dequeue_signal_lock-into-kernel_dequeue_signal.patch added to -mm tree"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]