Linux 4.2.4 Wierd Fuse loading and errors with peripherals RH DVD Creator

From: Jeffrey Merkey
Date: Mon Oct 26 2015 - 19:46:08 EST


DVD Creator returns intermittent errors saying that the driver will
not close properly with 4.2.4. The log shows seeks for block
addresses which are out of bounds for the device size. Each time this
happens I see a message saying fuse is initing. Same as other traces
on previous bugs. For some reason fuse is constantly trying to load
and wierd drive behavior is the result.

Jeff


fuse init (API version 7.23)
blk_update_request: I/O error, dev fd0, sector 0
floppy: error -5 while reading block 0
blk_update_request: I/O error, dev fd0, sector 0
floppy: error -5 while reading block 0
sr 1:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] tag#0 Add. Sense: Logical block address out of range
sr 1:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
blk_update_request: I/O error, dev sr0, sector 0
sr 1:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] tag#0 Add. Sense: Logical block address out of range
sr 1:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
blk_update_request: I/O error, dev sr0, sector 0
Buffer I/O error on dev sr0, logical block 0, async page read
sr 1:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] tag#0 Add. Sense: Logical block address out of range
sr 1:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 01 00
blk_update_request: I/O error, dev sr0, sector 0
Buffer I/O error on dev sr0, logical block 0, async page read
tg3 0000:05:02.0 eth0: Link is down
tg3 0000:05:02.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:05:02.0 eth0: Flow control is on for TX and on for RX
tg3 0000:05:02.0 eth0: Link is down
tg3 0000:05:02.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:05:02.0 eth0: Flow control is on for TX and on for RX
perf interrupt took too long (2507 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5011 > 5000), lowering
kernel.perf_event_max_sample_rate to 25000
[root@aya ~]#
[root@aya ~]#
[root@aya ~]#
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/