[PATCH] ixgbe: Wait for 1ms, not 1us, after RST

[dan . streetman]

From: Dan Streetman <dan.streetman@xxxxxxxxxxxxx>

The driver currently waits 1us after issuing a RST, but the spec
requires it to wait 1ms.

Signed-off-by: Dan Streetman <dan.streetman@xxxxxxxxxxxxx>
Signed-off-by: Dan Streetman <ddstreet@xxxxxxxx>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index 4e75843..147bc65 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -113,7 +113,12 @@ mac_reset_top:
 
 	/* Poll for reset bit to self-clear indicating reset is complete */
 	for (i = 0; i < 10; i++) {
-		udelay(1);
+		/* sec 8.2.4.1.1 :
+		 * programmers must wait approximately 1 ms after setting before
+		 * attempting to check if the bit has cleared or to access (read
+		 * or write) any other device register.
+		 */
+		mdelay(1);
 		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
 		if (!(ctrl & IXGBE_CTRL_RST_MASK))
 			break;
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/