Re: [PATCH v3 3/3] leds: rt5033: Add RT5033 Flash led device driver
From: Ingi Kim
Date: Mon Oct 26 2015 - 21:00:43 EST
Hi Jacek,
Thanks for the review
I can make this code better :)
On 2015ë 10ì 26ì 19:10, Jacek Anaszewski wrote:
> Hi Ingi,
>
> Thanks for the update. I've found a few minor issues, please
> refer to my comments below.
>
> On 10/23/2015 07:48 AM, Ingi Kim wrote:
>> This patch adds device driver of Richtek RT5033 PMIC.
>> The driver supports a current regulated output to drive
>> white LEDs for camera flash.
>>
>> Signed-off-by: Ingi Kim <ingi2.kim@xxxxxxxxxxx>
>> ---
>> drivers/leds/Kconfig | 8 +
>> drivers/leds/Makefile | 1 +
>> drivers/leds/leds-rt5033.c | 314 +++++++++++++++++++++++++++++++++++++
>> include/linux/mfd/rt5033-private.h | 49 ++++++
>> include/linux/mfd/rt5033.h | 13 ++
>> 5 files changed, 385 insertions(+)
>> create mode 100644 drivers/leds/leds-rt5033.c
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index 42990f2..29613e3 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -345,6 +345,14 @@ config LEDS_PCA963X
>> LED driver chip accessed via the I2C bus. Supported
>> devices include PCA9633 and PCA9634
>>
>> +config LEDS_RT5033
>> + tristate "LED support for RT5033 PMIC"
>> + depends on LEDS_CLASS_FLASH && OF
>> + depends on MFD_RT5033
>> + help
>> + This option enables support for on-chip LED driver on
>> + RT5033 PMIC.
>> +
>> config LEDS_WM831X_STATUS
>> tristate "LED support for status LEDs on WM831x PMICs"
>> depends on LEDS_CLASS
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index b503f92..bcc4d93 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -23,6 +23,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
>> obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
>> obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
>> obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
>> +obj-$(CONFIG_LEDS_RT5033) += leds-rt5033.o
>> obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
>> obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
>> obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
>> diff --git a/drivers/leds/leds-rt5033.c b/drivers/leds/leds-rt5033.c
>> new file mode 100644
>> index 0000000..4ba1ec6
>> --- /dev/null
>> +++ b/drivers/leds/leds-rt5033.c
>> @@ -0,0 +1,314 @@
>> +/*
>> + * led driver for RT5033
>> + *
>> + * Copyright (C) 2015 Samsung Electronics, Co., Ltd.
>> + * Ingi Kim <ingi2.kim@xxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#include <linux/mfd/rt5033.h>
>> +#include <linux/mfd/rt5033-private.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/workqueue.h>
>> +
>> +#define RT5033_LED_FLASH_TIMEOUT_MIN 64000
>> +#define RT5033_LED_FLASH_TIMEOUT_STEP 32000
>> +#define RT5033_LED_FLASH_BRIGHTNESS_MIN 50000
>> +#define RT5033_LED_FLASH_BRIGHTNESS_STEP 25000
>> +#define RT5033_LED_TORCH_BRIGHTNESS_MIN 12500
>> +#define RT5033_LED_TORCH_BRIGHTNESS_STEP 12500
>> +
>> +/* Macro to get offset of rt5033_led_config_data */
>> +#define RT5033_LED_CONFIG_DATA_OFFSET(val, step, min) (((val) - (min)) \
>> + / (step))
>> +
>> +struct rt5033_led_config_data {
>> + u32 flash_max_microamp;
>> + u32 flash_max_timeout;
>> + u32 torch_max_microamp;
>> +};
>> +
>> +static struct rt5033_led *flcdev_to_led(
>> + struct led_classdev_flash *fled_cdev)
>> +{
>> + return container_of(fled_cdev, struct rt5033_led, fled_cdev);
>> +}
>> +
>> +static void rt5033_brightness_set(struct rt5033_led *led,
>> + enum led_brightness brightness)
>> +{
>> + mutex_lock(&led->lock);
>> +
>> + if (!brightness) {
>> + regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>> + RT5033_FLED_FUNC2_MASK, 0x0);
>> + } else {
>> + regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>> + RT5033_FLED_FUNC1_MASK, RT5033_FLED_PINCTRL);
>> + regmap_update_bits(led->regmap, RT5033_REG_FLED_CTRL1,
>> + RT5033_FLED_CTRL1_MASK,
>> + (brightness - 1) << 4);
>> + regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>> + RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED);
>> + }
>> +
>> + mutex_unlock(&led->lock);
>> +}
>> +
>> +static void rt5033_brightness_set_work(struct work_struct *work)
>> +{
>> + struct rt5033_led *led =
>> + container_of(work, struct rt5033_led, work_brightness_set);
>> +
>> + rt5033_brightness_set(led, led->torch_brightness);
>> +}
>> +
>> +static void rt5033_led_brightness_set(struct led_classdev *led_cdev,
>> + enum led_brightness brightness)
>> +{
>> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
>> + struct rt5033_led *led = flcdev_to_led(fled_cdev);
>> +
>> + led->torch_brightness = brightness;
>> + schedule_work(&led->work_brightness_set);
>> +}
>> +
>> +static int rt5033_led_brightness_set_sync(struct led_classdev *led_cdev,
>> + enum led_brightness brightness)
>> +{
>> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
>> + struct rt5033_led *led = flcdev_to_led(fled_cdev);
>> +
>> + rt5033_brightness_set(led, brightness);
>> +
>> + return 0;
>> +}
>> +
>> +static void rt5033_init_flash_properties(struct led_classdev_flash *fled_cdev,
>> + struct rt5033_led_config_data *cfg)
>> +{
>> + struct led_flash_setting *tm_set, *fl_set;
>> +
>> + tm_set = &fled_cdev->timeout;
>> + tm_set->min = RT5033_LED_FLASH_TIMEOUT_MIN;
>> + tm_set->max = cfg->flash_max_timeout;
>> + tm_set->step = RT5033_LED_FLASH_TIMEOUT_STEP;
>> + tm_set->val = cfg->flash_max_timeout;
>> +
>> + fl_set = &fled_cdev->brightness;
>> + fl_set->min = RT5033_LED_FLASH_BRIGHTNESS_MIN;
>> + fl_set->max = cfg->flash_max_microamp;
>> + fl_set->step = RT5033_LED_FLASH_BRIGHTNESS_STEP;
>> + fl_set->val = cfg->flash_max_microamp;
>> +}
>> +
>> +static int rt5033_led_parse_dt(struct rt5033_led *led, struct device *dev,
>> + struct rt5033_led_config_data *cfg)
>> +{
>> + struct device_node *np = dev->of_node;
>> + struct device_node *child_node;
>> + int ret = 0;
>> +
>> + if (!np)
>> + return -ENXIO;
>> +
>> + child_node = of_get_next_available_child(np, NULL);
>> + if (!child_node) {
>> + dev_err(dev, "DT child node isn't found\n");
>> + return -EINVAL;
>> + }
>> +
>> + led->fled_cdev.led_cdev.name =
>> + of_get_property(child_node, "label", NULL) ? : child_node->name;
>> +
>> + ret = of_property_read_u32(child_node, "led-max-microamp",
>> + &cfg->torch_max_microamp);
>> + if (ret) {
>> + dev_err(dev, "failed to parse led-max-microamp\n");
>> + return ret;
>
> You need to release of_node reference before returning.
> Add a label before of_node_put below, and goto there from here.
>
I understand what you are saying.
I'd fix like that.
>> + }
>> +
>> + ret = of_property_read_u32(child_node, "flash-max-microamp",
>> + &cfg->flash_max_microamp);
>> + if (ret) {
>> + dev_err(dev, "failed to parse flash-max-microamp\n");
>> + return ret;
>
> Same situation here.
>
>> + }
>> +
>> + ret = of_property_read_u32(child_node, "flash-max-timeout-us",
>> + &cfg->flash_max_timeout);
>> + if (ret)
>> + dev_err(dev, "failed to parse flash-max-timeout-us\n");
>> +
>> + of_node_put(child_node);
>> +
>> + return ret;
>> +}
>> +
>> +static int rt5033_led_flash_brightness_set(struct led_classdev_flash *fled_cdev,
>> + u32 brightness)
>> +{
>> + struct rt5033_led *led = flcdev_to_led(fled_cdev);
>> + u32 flash_brightness_offset;
>> +
>> + mutex_lock(&led->lock);
>> +
>> + flash_brightness_offset =
>> + RT5033_LED_CONFIG_DATA_OFFSET(fled_cdev->brightness.val,
>> + fled_cdev->brightness.step,
>> + fled_cdev->brightness.min);
>> +
>> + regmap_update_bits(led->regmap, RT5033_REG_FLED_STROBE_CTRL1,
>> + RT5033_FLED_STRBCTRL1_MASK, flash_brightness_offset);
>> +
>> + mutex_unlock(&led->lock);
>> +
>> + return 0;
>> +}
>> +
>> +static int rt5033_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
>> + u32 timeout)
>> +{
>> + struct rt5033_led *led = flcdev_to_led(fled_cdev);
>> + u32 flash_tm_offset;
>> +
>> + mutex_lock(&led->lock);
>> +
>> + flash_tm_offset =
>> + RT5033_LED_CONFIG_DATA_OFFSET(fled_cdev->timeout.val,
>> + fled_cdev->timeout.step,
>> + fled_cdev->timeout.min);
>> +
>> + regmap_update_bits(led->regmap, RT5033_REG_FLED_STROBE_CTRL2,
>> + RT5033_FLED_STRBCTRL2_MASK, flash_tm_offset);
>> +
>> + mutex_unlock(&led->lock);
>> +
>> + return 0;
>> +}
>> +
>> +static int rt5033_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
>> + bool state)
>> +{
>> + struct rt5033_led *led = flcdev_to_led(fled_cdev);
>> +
>> + mutex_lock(&led->lock);
>> +
>> + regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>> + RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED);
>> +
>> + if (state) {
>> + regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>> + RT5033_FLED_FUNC1_MASK, RT5033_FLED_STRB_SEL
>> + | RT5033_FLED_PINCTRL);
>> + regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION2,
>> + RT5033_FLED_FUNC2_MASK, RT5033_FLED_ENFLED
>> + | RT5033_FLED_SREG_STRB);
>> + }
>> + fled_cdev->led_cdev.brightness = LED_OFF;
>> +
>> + mutex_unlock(&led->lock);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct led_flash_ops flash_ops = {
>> + .flash_brightness_set = rt5033_led_flash_brightness_set,
>> + .strobe_set = rt5033_led_flash_strobe_set,
>> + .timeout_set = rt5033_led_flash_timeout_set,
>> +};
>> +
>> +static int rt5033_led_probe(struct platform_device *pdev)
>> +{
>> + struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
>> + struct rt5033_led *led;
>> + struct led_classdev *led_cdev;
>> + struct rt5033_led_config_data led_cfg;
>> + int ret;
>> +
>> + led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
>> + if (!led)
>> + return -ENOMEM;
>> +
>> + platform_set_drvdata(pdev, led);
>> + led->dev = &pdev->dev;
>> + led->regmap = rt5033->regmap;
>> +
>> + ret = rt5033_led_parse_dt(led, &pdev->dev, &led_cfg);
>> + if (ret)
>> + return ret;
>> +
>> + mutex_init(&led->lock);
>> + INIT_WORK(&led->work_brightness_set, rt5033_brightness_set_work);
>> +
>> + rt5033_init_flash_properties(&led->fled_cdev, &led_cfg);
>> + led->fled_cdev.ops = &flash_ops;
>> + led_cdev = &led->fled_cdev.led_cdev;
>> +
>> + led_cdev->max_brightness =
>> + RT5033_LED_CONFIG_DATA_OFFSET(led_cfg.torch_max_microamp,
>> + RT5033_LED_TORCH_BRIGHTNESS_STEP,
>> + RT5033_LED_TORCH_BRIGHTNESS_MIN);
>> +
>> + led_cdev->brightness_set = rt5033_led_brightness_set;
>> + led_cdev->brightness_set_sync = rt5033_led_brightness_set_sync;
>> + led_cdev->flags |= LED_CORE_SUSPENDRESUME | LED_DEV_CAP_FLASH;
>> +
>> + ret = led_classdev_flash_register(&pdev->dev, &led->fled_cdev);
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "can't register LED %s\n", led_cdev->name);
>> + mutex_destroy(&led->lock);
>> + return ret;
>> + }
>> +
>> + regmap_update_bits(led->regmap, RT5033_REG_FLED_FUNCTION1,
>> + RT5033_FLED_FUNC1_MASK, RT5033_FLED_RESET);
>> +
>> + return 0;
>> +}
>> +
>> +static int rt5033_led_remove(struct platform_device *pdev)
>> +{
>> + struct rt5033_led *led = platform_get_drvdata(pdev);
>> +
>> + led_classdev_flash_unregister(&led->fled_cdev);
>> + cancel_work_sync(&led->work_brightness_set);
>> +
>> + mutex_destroy(&led->lock);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct platform_device_id rt5033_led_id[] = {
>> + { "rt5033-led", },
>> + { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(platform, rt5033_led_id);
>
> You're using only DT, please remove above MODULE_DEVICE_TABLE and
> rt5033_led_id definition.
>
Okay, I'd remove it.
>> +static const struct of_device_id rt5033_led_match[] = {
>> + { .compatible = "richtek,rt5033-led", },
>> + { /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, rt5033_led_match);
>> +
>> +static struct platform_driver rt5033_led_driver = {
>> + .driver = {
>> + .name = "rt5033-led",
>> + .of_match_table = rt5033_led_match,
>> + },
>> + .probe = rt5033_led_probe,
>> + .id_table = rt5033_led_id,
>> + .remove = rt5033_led_remove,
>> +};
>> +module_platform_driver(rt5033_led_driver);
>> +
>> +MODULE_AUTHOR("Ingi Kim <ingi2.kim@xxxxxxxxxxx>");
>> +MODULE_DESCRIPTION("Richtek RT5033 LED driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_ALIAS("platform:rt5033-led");
>> diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
>> index 1b63fc2..c8e99e4 100644
>> --- a/include/linux/mfd/rt5033-private.h
>> +++ b/include/linux/mfd/rt5033-private.h
>> @@ -93,6 +93,55 @@ enum rt5033_reg {
>> #define RT5033_RT_CTRL1_UUG_MASK 0x02
>> #define RT5033_RT_HZ_MASK 0x01
>>
>> +/* RT5033 FLED Function1 register */
>> +#define RT5033_FLED_FUNC1_MASK 0x94
>> +#define RT5033_FLED_STRB_SEL 0x04
>> +#define RT5033_FLED_PINCTRL 0x10
>> +#define RT5033_FLED_RESET 0x80
>> +
>> +/* RT5033 FLED Function2 register */
>> +#define RT5033_FLED_FUNC2_MASK 0x81
>> +#define RT5033_FLED_ENFLED 0x01
>> +#define RT5033_FLED_SREG_STRB 0x80
>> +
>> +/* RT5033 FLED Strobe Control1 */
>> +#define RT5033_FLED_STRBCTRL1_MASK 0xFF
>> +#define RT5033_FLED_STRBCTRL1_TM_CUR_MAX 0xE0
>> +#define RT5033_FLED_STRBCTRL1_FL_CUR_DEF 0x0D
>> +#define RT5033_FLED_STRBCTRL1_FL_CUR_MAX 0x1F
>> +
>> +/* RT5033 FLED Strobe Control2 */
>> +#define RT5033_FLED_STRBCTRL2_MASK 0x3F
>> +#define RT5033_FLED_STRBCTRL2_TM_DEF 0x0F
>> +#define RT5033_FLED_STRBCTRL2_TM_MAX 0x3F
>> +
>> +/* RT5033 FLED Control1 */
>> +#define RT5033_FLED_CTRL1_MASK 0xF7
>> +#define RT5033_FLED_CTRL1_TORCH_CUR_DEF 0x20
>> +#define RT5033_FLED_CTRL1_TORCH_CUR_MAX 0xF0
>> +#define RT5033_FLED_CTRL1_LBP_DEF 0x02
>> +#define RT5033_FLED_CTRL1_LBP_MAX 0x07
>> +
>> +/* RT5033 FLED Control2 */
>> +#define RT5033_FLED_CTRL2_MASK 0xFF
>> +#define RT5033_FLED_CTRL2_VMID_DEF 0x37
>> +#define RT5033_FLED_CTRL2_VMID_MAX 0x3F
>> +#define RT5033_FLED_CTRL2_TRACK_ALIVE 0x40
>> +#define RT5033_FLED_CTRL2_MID_TRACK 0x80
>> +
>> +/* RT5033 FLED Control4 */
>> +#define RT5033_FLED_CTRL4_MASK 0xE0
>> +#define RT5033_FLED_CTRL4_RESV 0x14
>> +#define RT5033_FLED_CTRL4_VTRREG_DEF 0x40
>> +#define RT5033_FLED_CTRL4_VTRREG_MAX 0x60
>> +#define RT5033_FLED_CTRL4_TRACK_CLK 0x80
>> +
>> +/* RT5033 FLED Control5 */
>> +#define RT5033_FLED_CTRL5_MASK 0xC0
>> +#define RT5033_FLED_CTRL5_RESV 0x10
>> +#define RT5033_FLED_CTRL5_TA_GOOD 0x40
>> +#define RT5033_FLED_CTRL5_TA_EXIST 0x80
>> +
>> /* RT5033 control register */
>> #define RT5033_CTRL_FCCM_BUCK_MASK 0x00
>> #define RT5033_CTRL_BUCKOMS_MASK 0x01
>> diff --git a/include/linux/mfd/rt5033.h b/include/linux/mfd/rt5033.h
>> index 6cff5cf..11f6d48 100644
>> --- a/include/linux/mfd/rt5033.h
>> +++ b/include/linux/mfd/rt5033.h
>> @@ -15,6 +15,7 @@
>> #include <linux/regulator/consumer.h>
>> #include <linux/i2c.h>
>> #include <linux/regmap.h>
>> +#include <linux/led-class-flash.h>
>> +
>> #include <linux/power_supply.h>
>>
>> /* RT5033 regulator IDs */
>> @@ -59,4 +60,16 @@ struct rt5033_charger {
>> struct rt5033_charger_data *chg;
>> };
>>
>> +/* RT5033 Flash led platform data */
>> +struct rt5033_led {
>> + struct device *dev;
>> + struct led_classdev_flash fled_cdev;
>> + struct mutex lock;
>> + struct rt5033_dev *rt5033;
>
> You don't use this field in the driver.
>
Check, I'd remove it.
>> + struct regmap *regmap;
>> + struct work_struct work_brightness_set;
>> +
>> + enum led_brightness torch_brightness;
>> +};
>
> Move this struct to leds-rt5033.c. It is not being
> used in drivers/mfd/rt5033.c. You could avoid including
> linux/led-class-flash.h then, too.
>
Right, This struct is only used to rt5033 led driver.
I should move it.
>> +
>> #endif /* __RT5033_H__ */
>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/