Re: [PATCH v3] dmaengine: fsl-edma: add PM suspend/resume support
From: Vinod Koul
Date: Mon Oct 26 2015 - 22:00:47 EST
On Mon, Oct 19, 2015 at 04:31:05PM +0800, Yuan Yao wrote:
The patch overall looks fine, but
>
> +static int fsl_edma_suspend_late(struct device *dev)
This needs protection and will have build failure when CONFIG_PM is not
defined
> +{
> + struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev);
> + struct fsl_edma_chan *fsl_chan;
> + unsigned long flags;
> + int i;
> +
> + for (i = 0; i < fsl_edma->n_chans; i++) {
> + fsl_chan = &fsl_edma->chans[i];
> + spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
> + /* Make sure chan is idle or will force disable. */
> + if (unlikely(!fsl_chan->idle)) {
> + dev_warn(dev, "WARN: There is non-idle channel.");
> + fsl_edma_disable_request(fsl_chan);
> + fsl_edma_chan_mux(fsl_chan, 0, false);
> + }
> +
> + fsl_chan->pm_state = SUSPENDED;
> + spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
> + }
> +
> + return 0;
> +}
> +
> +static int fsl_edma_resume_early(struct device *dev)
> +{
> + struct fsl_edma_engine *fsl_edma = dev_get_drvdata(dev);
> + struct fsl_edma_chan *fsl_chan;
> + int i;
> +
> + for (i = 0; i < fsl_edma->n_chans; i++) {
> + fsl_chan = &fsl_edma->chans[i];
> + fsl_chan->pm_state = RUNNING;
> + edma_writew(fsl_edma, 0x0, fsl_edma->membase + EDMA_TCD_CSR(i));
> + if (fsl_chan->slave_id != 0)
> + fsl_edma_chan_mux(fsl_chan, fsl_chan->slave_id, true);
> + }
> +
> + edma_writel(fsl_edma, EDMA_CR_ERGA | EDMA_CR_ERCA,
> + fsl_edma->membase + EDMA_CR);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops fsl_edma_pm_ops = {
> + .suspend_late = fsl_edma_suspend_late,
> + .resume_early = fsl_edma_resume_early,
> +};
This one too, also why use late and early, pls add the note here
> static const struct of_device_id fsl_edma_dt_ids[] = {
> { .compatible = "fsl,vf610-edma", },
> { /* sentinel */ }
> @@ -969,6 +1042,7 @@ static struct platform_driver fsl_edma_driver = {
> .driver = {
> .name = "fsl-edma",
> .of_match_table = fsl_edma_dt_ids,
> + .pm = &fsl_edma_pm_ops,
This will fail too if CONFIG_PM is not defined
--
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/