Re: [PATCH v3 3/4] mfd: arizona: Remove bindings covered in new subsystem specific docs

From: Lee Jones
Date: Wed Oct 28 2015 - 05:03:19 EST


On Tue, 27 Oct 2015, Charles Keepax wrote:

> Binding documentation has been added in new subsystem specific binding
> documents. This patch removes the now duplicate documentation from the
> MFD documentation.
>
> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>
> Changes since v2:
> - No longer moving the core regulators into the regulator binding document,
> as they are properties of the device as a whole not just the regulators
> - Moved the maintainer updates into a seperate patch
>
> Lee, I have removed your ack because the patch has changed a fair amount.
> Apologies if this would not have been your preference.

That was the right thing to do.

> Thanks,
> Charles
>
> Documentation/devicetree/bindings/mfd/arizona.txt | 15 +++------------
> 1 files changed, 3 insertions(+), 12 deletions(-)

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
> index a8fee60..18be0cb 100644
> --- a/Documentation/devicetree/bindings/mfd/arizona.txt
> +++ b/Documentation/devicetree/bindings/mfd/arizona.txt
> @@ -44,7 +44,6 @@ Required properties:
> Optional properties:
>
> - wlf,reset : GPIO specifier for the GPIO controlling /RESET
> - - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
>
> - wlf,gpio-defaults : A list of GPIO configuration register values. Defines
> for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
> @@ -67,21 +66,13 @@ Optional properties:
> present, the number of values should be less than or equal to the
> number of inputs, unspecified inputs will use the chip default.
>
> - - wlf,hpdet-channel : Headphone detection channel.
> - ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL
> - ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR
> - If this node is not mentioned or if the value is unknown, then
> - headphone detection mode is set to HPDETL.
> -
> - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
> they are being externally supplied. As covered in
> Documentation/devicetree/bindings/regulator/regulator.txt
>
> -Optional subnodes:
> - - ldo1 : Initial data for the LDO1 regulator, as covered in
> - Documentation/devicetree/bindings/regulator/regulator.txt
> - - micvdd : Initial data for the MICVDD regulator, as covered in
> - Documentation/devicetree/bindings/regulator/regulator.txt
> +Also see child specific device properties:
> + Regulator - ../regulator/arizona-regulator.txt
> + Extcon - ../extcon/extcon-arizona.txt
>
> Example:
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/