[PATCH v9 8/8] scsi: ufs-qcom: add QUniPro hardware support and power optimizations
From: Yaniv Gardi
Date: Wed Oct 28 2015 - 07:17:00 EST
New revisions of UFS host controller supports the new UniPro
hardware controller (referred as QUniPro). This patch adds
the support to enable this new UniPro controller hardware.
This change also adds power optimization for bus scaling feature,
as well as support for HS-G3 power mode.
Reviewed-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
Reviewed-by: Gilad Broner <gbroner@xxxxxxxxxxxxxx>
Signed-off-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>
---
drivers/scsi/ufs/ufs-qcom.c | 640 ++++++++++++++++++++++++++++++++------------
drivers/scsi/ufs/ufs-qcom.h | 31 ++-
drivers/scsi/ufs/ufshcd.c | 8 +-
drivers/scsi/ufs/ufshcd.h | 27 +-
4 files changed, 525 insertions(+), 181 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 1633808..4f38d00 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -44,11 +44,11 @@ enum {
static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
-static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result);
-static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
- const char *speed_mode);
static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote);
static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
+static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
+ u32 clk_cycles);
+
static void ufs_qcom_dump_regs(struct ufs_hba *hba, int offset, int len,
char *prefix)
{
@@ -177,6 +177,7 @@ static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk",
&host->tx_l1_sync_clk);
+
out:
return err;
}
@@ -209,7 +210,9 @@ static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
do {
err = ufshcd_dme_get(hba,
- UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val);
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
+ UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
+ &tx_fsm_val);
if (err || tx_fsm_val == TX_FSM_HIBERN8)
break;
@@ -223,7 +226,9 @@ static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
*/
if (time_after(jiffies, timeout))
err = ufshcd_dme_get(hba,
- UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val);
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
+ UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
+ &tx_fsm_val);
if (err) {
dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
@@ -237,6 +242,15 @@ static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
return err;
}
+static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
+{
+ ufshcd_rmwl(host->hba, QUNIPRO_SEL,
+ ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0,
+ REG_UFS_CFG1);
+ /* make sure above configuration is applied before we return */
+ mb();
+}
+
static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@@ -251,9 +265,11 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
usleep_range(1000, 1100);
ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B);
+
if (ret) {
- dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = %d\n",
- __func__, ret);
+ dev_err(hba->dev,
+ "%s: ufs_qcom_phy_calibrate_phy()failed, ret = %d\n",
+ __func__, ret);
goto out;
}
@@ -274,9 +290,12 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
ret = ufs_qcom_phy_is_pcs_ready(phy);
if (ret)
- dev_err(hba->dev, "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
+ dev_err(hba->dev,
+ "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
__func__, ret);
+ ufs_qcom_select_unipro_mode(host);
+
out:
return ret;
}
@@ -299,7 +318,8 @@ static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba)
mb();
}
-static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, bool status)
+static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
int err = 0;
@@ -329,12 +349,12 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, bool status)
}
/**
- * Returns non-zero for success (which rate of core_clk) and 0
- * in case of a failure
+ * Returns zero for success and non-zero in case of a failure
*/
-static unsigned long
-ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
+static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
+ u32 hs, u32 rate, bool update_link_startup_timer)
{
+ int ret = 0;
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct ufs_clk_info *clki;
u32 core_clk_period_in_ns;
@@ -352,11 +372,13 @@ ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
static u32 hs_fr_table_rA[][2] = {
{UFS_HS_G1, 0x1F},
{UFS_HS_G2, 0x3e},
+ {UFS_HS_G3, 0x7D},
};
static u32 hs_fr_table_rB[][2] = {
{UFS_HS_G1, 0x24},
{UFS_HS_G2, 0x49},
+ {UFS_HS_G3, 0x92},
};
/*
@@ -384,7 +406,17 @@ ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
core_clk_rate = DEFAULT_CLK_RATE_HZ;
core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC;
- ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
+ if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) {
+ ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
+ /*
+ * make sure above write gets applied before we return from
+ * this function.
+ */
+ mb();
+ }
+
+ if (ufs_qcom_cap_qunipro(host))
+ goto out;
core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate;
core_clk_period_in_ns <<= OFFSET_CLK_NS_REG;
@@ -434,35 +466,59 @@ ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate)
goto out_error;
}
- /* this register 2 fields shall be written at once */
- ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us,
- REG_UFS_TX_SYMBOL_CLK_NS_US);
+ if (ufshcd_readl(hba, REG_UFS_TX_SYMBOL_CLK_NS_US) !=
+ (core_clk_period_in_ns | tx_clk_cycles_per_us)) {
+ /* this register 2 fields shall be written at once */
+ ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us,
+ REG_UFS_TX_SYMBOL_CLK_NS_US);
+ /*
+ * make sure above write gets applied before we return from
+ * this function.
+ */
+ mb();
+ }
+
+ if (update_link_startup_timer) {
+ ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
+ REG_UFS_PA_LINK_STARTUP_TIMER);
+ /*
+ * make sure that this configuration is applied before
+ * we return
+ */
+ mb();
+ }
goto out;
out_error:
- core_clk_rate = 0;
+ ret = -EINVAL;
out:
- return core_clk_rate;
+ return ret;
}
-static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, bool status)
+static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
{
- unsigned long core_clk_rate = 0;
- u32 core_clk_cycles_per_100ms;
+ int err = 0;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
switch (status) {
case PRE_CHANGE:
- core_clk_rate = ufs_qcom_cfg_timers(hba, UFS_PWM_G1,
- SLOWAUTO_MODE, 0);
- if (!core_clk_rate) {
+ if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE,
+ 0, true)) {
dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
__func__);
- return -EINVAL;
+ err = -EINVAL;
+ goto out;
}
- core_clk_cycles_per_100ms =
- (core_clk_rate / MSEC_PER_SEC) * 100;
- ufshcd_writel(hba, core_clk_cycles_per_100ms,
- REG_UFS_PA_LINK_STARTUP_TIMER);
+
+ if (ufs_qcom_cap_qunipro(host))
+ /*
+ * set unipro core clock cycles to 150 & clear clock
+ * divider
+ */
+ err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba,
+ 150);
+
break;
case POST_CHANGE:
ufs_qcom_link_startup_post_change(hba);
@@ -471,7 +527,8 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, bool status)
break;
}
- return 0;
+out:
+ return err;
}
static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
@@ -498,8 +555,10 @@ static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
* If UniPro link is not active, PHY ref_clk, main PHY analog power
* rail and low noise analog power rail for PLL can be switched off.
*/
- if (!ufs_qcom_is_link_active(hba))
+ if (!ufs_qcom_is_link_active(hba)) {
+ ufs_qcom_disable_lane_clks(host);
phy_power_off(phy);
+ }
out:
return ret;
@@ -518,6 +577,10 @@ static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
goto out;
}
+ err = ufs_qcom_enable_lane_clks(host);
+ if (err)
+ goto out;
+
hba->is_sys_suspended = false;
out:
@@ -622,6 +685,81 @@ static int ufs_qcom_get_pwr_dev_param(struct ufs_qcom_dev_params *qcom_param,
return 0;
}
+#ifdef CONFIG_MSM_BUS_SCALING
+static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
+ const char *speed_mode)
+{
+ struct device *dev = host->hba->dev;
+ struct device_node *np = dev->of_node;
+ int err;
+ const char *key = "qcom,bus-vector-names";
+
+ if (!speed_mode) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN"))
+ err = of_property_match_string(np, key, "MAX");
+ else
+ err = of_property_match_string(np, key, speed_mode);
+
+out:
+ if (err < 0)
+ dev_err(dev, "%s: Invalid %s mode %d\n",
+ __func__, speed_mode, err);
+ return err;
+}
+
+static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result)
+{
+ int gear = max_t(u32, p->gear_rx, p->gear_tx);
+ int lanes = max_t(u32, p->lane_rx, p->lane_tx);
+ int pwr;
+
+ /* default to PWM Gear 1, Lane 1 if power mode is not initialized */
+ if (!gear)
+ gear = 1;
+
+ if (!lanes)
+ lanes = 1;
+
+ if (!p->pwr_rx && !p->pwr_tx) {
+ pwr = SLOWAUTO_MODE;
+ snprintf(result, BUS_VECTOR_NAME_LEN, "MIN");
+ } else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE ||
+ p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) {
+ pwr = FAST_MODE;
+ snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS",
+ p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes);
+ } else {
+ pwr = SLOW_MODE;
+ snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d",
+ "PWM", gear, lanes);
+ }
+}
+
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+{
+ int err = 0;
+
+ if (vote != host->bus_vote.curr_vote) {
+ err = msm_bus_scale_client_update_request(
+ host->bus_vote.client_handle, vote);
+ if (err) {
+ dev_err(host->hba->dev,
+ "%s: msm_bus_scale_client_update_request() failed: bus_client_handle=0x%x, vote=%d, err=%d\n",
+ __func__, host->bus_vote.client_handle,
+ vote, err);
+ goto out;
+ }
+
+ host->bus_vote.curr_vote = vote;
+ }
+out:
+ return err;
+}
+
static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
{
int vote;
@@ -643,8 +781,132 @@ static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
return err;
}
+static ssize_t
+show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n",
+ host->bus_vote.is_max_bw_needed);
+}
+
+static ssize_t
+store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ uint32_t value;
+
+ if (!kstrtou32(buf, 0, &value)) {
+ host->bus_vote.is_max_bw_needed = !!value;
+ ufs_qcom_update_bus_bw_vote(host);
+ }
+
+ return count;
+}
+
+static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
+{
+ int err;
+ struct msm_bus_scale_pdata *bus_pdata;
+ struct device *dev = host->hba->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct device_node *np = dev->of_node;
+
+ bus_pdata = msm_bus_cl_get_pdata(pdev);
+ if (!bus_pdata) {
+ dev_err(dev, "%s: failed to get bus vectors\n", __func__);
+ err = -ENODATA;
+ goto out;
+ }
+
+ err = of_property_count_strings(np, "qcom,bus-vector-names");
+ if (err < 0 || err != bus_pdata->num_usecases) {
+ dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n",
+ __func__, err);
+ goto out;
+ }
+
+ host->bus_vote.client_handle = msm_bus_scale_register_client(bus_pdata);
+ if (!host->bus_vote.client_handle) {
+ dev_err(dev, "%s: msm_bus_scale_register_client failed\n",
+ __func__);
+ err = -EFAULT;
+ goto out;
+ }
+
+ /* cache the vote index for minimum and maximum bandwidth */
+ host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN");
+ host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX");
+
+ host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw;
+ host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw;
+ sysfs_attr_init(&host->bus_vote.max_bus_bw.attr);
+ host->bus_vote.max_bus_bw.attr.name = "max_bus_bw";
+ host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR;
+ err = device_create_file(dev, &host->bus_vote.max_bus_bw);
+out:
+ return err;
+}
+#else /* CONFIG_MSM_BUS_SCALING */
+static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host)
+{
+ return 0;
+}
+
+static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
+{
+ return 0;
+}
+
+static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
+{
+ return 0;
+}
+#endif /* CONFIG_MSM_BUS_SCALING */
+
+static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable)
+{
+ if (host->dev_ref_clk_ctrl_mmio &&
+ (enable ^ host->is_dev_ref_clk_enabled)) {
+ u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio);
+
+ if (enable)
+ temp |= host->dev_ref_clk_en_mask;
+ else
+ temp &= ~host->dev_ref_clk_en_mask;
+
+ /*
+ * If we are here to disable this clock it might be immediately
+ * after entering into hibern8 in which case we need to make
+ * sure that device ref_clk is active at least 1us after the
+ * hibern8 enter.
+ */
+ if (!enable)
+ udelay(1);
+
+ writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio);
+
+ /* ensure that ref_clk is enabled/disabled before we return */
+ wmb();
+
+ /*
+ * If we call hibern8 exit after this, we need to make sure that
+ * device ref_clk is stable for at least 1us before the hibern8
+ * exit command.
+ */
+ if (enable)
+ udelay(1);
+
+ host->is_dev_ref_clk_enabled = enable;
+ }
+}
+
static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
- bool status,
+ enum ufs_notify_change_status status,
struct ufs_pa_layer_attr *dev_max_params,
struct ufs_pa_layer_attr *dev_req_params)
{
@@ -677,6 +939,20 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
ufs_qcom_cap.desired_working_mode =
UFS_QCOM_LIMIT_DESIRED_MODE;
+ if (host->hw_ver.major == 0x1) {
+ /*
+ * HS-G3 operations may not reliably work on legacy QCOM
+ * UFS host controller hardware even though capability
+ * exchange during link startup phase may end up
+ * negotiating maximum supported gear as G3.
+ * Hence downgrade the maximum supported gear to HS-G2.
+ */
+ if (ufs_qcom_cap.hs_tx_gear > UFS_HS_G2)
+ ufs_qcom_cap.hs_tx_gear = UFS_HS_G2;
+ if (ufs_qcom_cap.hs_rx_gear > UFS_HS_G2)
+ ufs_qcom_cap.hs_rx_gear = UFS_HS_G2;
+ }
+
ret = ufs_qcom_get_pwr_dev_param(&ufs_qcom_cap,
dev_max_params,
dev_req_params);
@@ -688,9 +964,9 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
break;
case POST_CHANGE:
- if (!ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
+ if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
dev_req_params->pwr_rx,
- dev_req_params->hs_rate)) {
+ dev_req_params->hs_rate, false)) {
dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
__func__);
/*
@@ -752,10 +1028,11 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
if (host->hw_ver.minor == 0x0001 && host->hw_ver.step == 0x0001)
hba->quirks |= UFSHCD_QUIRK_BROKEN_INTR_AGGR;
+
+ hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC;
}
if (host->hw_ver.major >= 0x2) {
- hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC;
hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION;
if (!ufs_qcom_cap_qunipro(host))
@@ -770,77 +1047,27 @@ static void ufs_qcom_set_caps(struct ufs_hba *hba)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
- if (host->hw_ver.major >= 0x2)
- host->caps = UFS_QCOM_CAP_QUNIPRO;
-}
-
-static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host,
- const char *speed_mode)
-{
- struct device *dev = host->hba->dev;
- struct device_node *np = dev->of_node;
- int err;
- const char *key = "qcom,bus-vector-names";
-
- if (!speed_mode) {
- err = -EINVAL;
- goto out;
- }
-
- if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN"))
- err = of_property_match_string(np, key, "MAX");
- else
- err = of_property_match_string(np, key, speed_mode);
-
-out:
- if (err < 0)
- dev_err(dev, "%s: Invalid %s mode %d\n",
- __func__, speed_mode, err);
- return err;
-}
-
-static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote)
-{
- int err = 0;
-
- if (vote != host->bus_vote.curr_vote)
- host->bus_vote.curr_vote = vote;
-
- return err;
-}
-
-static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result)
-{
- int gear = max_t(u32, p->gear_rx, p->gear_tx);
- int lanes = max_t(u32, p->lane_rx, p->lane_tx);
- int pwr;
-
- /* default to PWM Gear 1, Lane 1 if power mode is not initialized */
- if (!gear)
- gear = 1;
-
- if (!lanes)
- lanes = 1;
+ hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
+ hba->caps |= UFSHCD_CAP_CLK_SCALING;
+ hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
- if (!p->pwr_rx && !p->pwr_tx) {
- pwr = SLOWAUTO_MODE;
- snprintf(result, BUS_VECTOR_NAME_LEN, "MIN");
- } else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE ||
- p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) {
- pwr = FAST_MODE;
- snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS",
- p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes);
- } else {
- pwr = SLOW_MODE;
- snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d",
- "PWM", gear, lanes);
+ if (host->hw_ver.major >= 0x2) {
+ host->caps = UFS_QCOM_CAP_QUNIPRO |
+ UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE;
}
}
+/**
+ * ufs_qcom_setup_clocks - enables/disable clocks
+ * @hba: host controller instance
+ * @on: If true, enable clocks else disable them.
+ *
+ * Returns 0 on success, non-zero on failure.
+ */
static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
- int err = 0;
+ int err;
int vote = 0;
/*
@@ -863,20 +1090,18 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on)
ufs_qcom_phy_disable_iface_clk(host->generic_phy);
goto out;
}
- /* enable the device ref clock */
- ufs_qcom_phy_enable_dev_ref_clk(host->generic_phy);
vote = host->bus_vote.saved_vote;
if (vote == host->bus_vote.min_bw_vote)
ufs_qcom_update_bus_bw_vote(host);
+
} else {
+
/* M-PHY RMMI interface clocks can be turned off */
ufs_qcom_phy_disable_iface_clk(host->generic_phy);
- if (!ufs_qcom_is_link_active(hba)) {
- /* turn off UFS local PHY ref_clk */
- ufs_qcom_phy_disable_ref_clk(host->generic_phy);
+ if (!ufs_qcom_is_link_active(hba))
/* disable device ref_clk */
- ufs_qcom_phy_disable_dev_ref_clk(host->generic_phy);
- }
+ ufs_qcom_dev_ref_clk_ctrl(host, false);
+
vote = host->bus_vote.min_bw_vote;
}
@@ -889,60 +1114,6 @@ out:
return err;
}
-static ssize_t
-show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct ufs_hba *hba = dev_get_drvdata(dev);
- struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-
- return snprintf(buf, PAGE_SIZE, "%u\n",
- host->bus_vote.is_max_bw_needed);
-}
-
-static ssize_t
-store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct ufs_hba *hba = dev_get_drvdata(dev);
- struct ufs_qcom_host *host = ufshcd_get_variant(hba);
- uint32_t value;
-
- if (!kstrtou32(buf, 0, &value)) {
- host->bus_vote.is_max_bw_needed = !!value;
- ufs_qcom_update_bus_bw_vote(host);
- }
-
- return count;
-}
-
-static int ufs_qcom_bus_register(struct ufs_qcom_host *host)
-{
- int err;
- struct device *dev = host->hba->dev;
- struct device_node *np = dev->of_node;
-
- err = of_property_count_strings(np, "qcom,bus-vector-names");
- if (err < 0 ) {
- dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n",
- __func__, err);
- goto out;
- }
-
- /* cache the vote index for minimum and maximum bandwidth */
- host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN");
- host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX");
-
- host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw;
- host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw;
- sysfs_attr_init(&host->bus_vote.max_bus_bw.attr);
- host->bus_vote.max_bus_bw.attr.name = "max_bus_bw";
- host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR;
- err = device_create_file(dev, &host->bus_vote.max_bus_bw);
-out:
- return err;
-}
-
#define ANDROID_BOOT_DEV_MAX 30
static char android_boot_dev[ANDROID_BOOT_DEV_MAX];
@@ -969,7 +1140,9 @@ static int ufs_qcom_init(struct ufs_hba *hba)
{
int err;
struct device *dev = hba->dev;
+ struct platform_device *pdev = to_platform_device(dev);
struct ufs_qcom_host *host;
+ struct resource *res;
if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev)))
return -ENODEV;
@@ -981,9 +1154,15 @@ static int ufs_qcom_init(struct ufs_hba *hba)
goto out;
}
+ /* Make a two way bind between the qcom host and the hba */
host->hba = hba;
ufshcd_set_variant(hba, host);
+ /*
+ * voting/devoting device ref_clk source is time consuming hence
+ * skip devoting it during aggressive clock gating. This clock
+ * will still be gated off during runtime suspend.
+ */
host->generic_phy = devm_phy_get(dev, "ufsphy");
if (IS_ERR(host->generic_phy)) {
@@ -999,6 +1178,30 @@ static int ufs_qcom_init(struct ufs_hba *hba)
ufs_qcom_get_controller_revision(hba, &host->hw_ver.major,
&host->hw_ver.minor, &host->hw_ver.step);
+ /*
+ * for newer controllers, device reference clock control bit has
+ * moved inside UFS controller register address space itself.
+ */
+ if (host->hw_ver.major >= 0x02) {
+ host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1;
+ host->dev_ref_clk_en_mask = BIT(26);
+ } else {
+ /* "dev_ref_clk_ctrl_mem" is optional resource */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res) {
+ host->dev_ref_clk_ctrl_mmio =
+ devm_ioremap_resource(dev, res);
+ if (IS_ERR(host->dev_ref_clk_ctrl_mmio)) {
+ dev_warn(dev,
+ "%s: could not map dev_ref_clk_ctrl_mmio, err %ld\n",
+ __func__,
+ PTR_ERR(host->dev_ref_clk_ctrl_mmio));
+ host->dev_ref_clk_ctrl_mmio = NULL;
+ }
+ host->dev_ref_clk_en_mask = BIT(5);
+ }
+ }
+
/* update phy revision information before calling phy_init() */
ufs_qcom_phy_save_controller_version(host->generic_phy,
host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
@@ -1015,9 +1218,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
ufs_qcom_set_caps(hba);
ufs_qcom_advertise_quirks(hba);
- hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_CLK_SCALING;
- hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
-
ufs_qcom_setup_clocks(hba, true);
if (hba->dev->id < MAX_UFS_QCOM_HOSTS)
@@ -1053,14 +1253,118 @@ static void ufs_qcom_exit(struct ufs_hba *hba)
phy_power_off(host->generic_phy);
}
-static
-void ufs_qcom_clk_scale_notify(struct ufs_hba *hba)
+static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
+ u32 clk_cycles)
+{
+ int err;
+ u32 core_clk_ctrl_reg;
+
+ if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK)
+ return -EINVAL;
+
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ &core_clk_ctrl_reg);
+ if (err)
+ goto out;
+
+ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
+ core_clk_ctrl_reg |= clk_cycles;
+
+ /* Clear CORE_CLK_DIV_EN */
+ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+
+ err = ufshcd_dme_set(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ core_clk_ctrl_reg);
+out:
+ return err;
+}
+
+static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
+{
+ /* nothing to do as of now */
+ return 0;
+}
+
+static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ if (!ufs_qcom_cap_qunipro(host))
+ return 0;
+
+ /* set unipro core clock cycles to 150 and clear clock divider */
+ return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150);
+}
+
+static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ int err;
+ u32 core_clk_ctrl_reg;
+
+ if (!ufs_qcom_cap_qunipro(host))
+ return 0;
+
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ &core_clk_ctrl_reg);
+
+ /* make sure CORE_CLK_DIV_EN is cleared */
+ if (!err &&
+ (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) {
+ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+ err = ufshcd_dme_set(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ core_clk_ctrl_reg);
+ }
+
+ return err;
+}
+
+static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ if (!ufs_qcom_cap_qunipro(host))
+ return 0;
+
+ /* set unipro core clock cycles to 75 and clear clock divider */
+ return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75);
+}
+
+static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
+ bool scale_up, enum ufs_notify_change_status status)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
+ int err = 0;
- if (!dev_req_params)
- return;
+ if (status == PRE_CHANGE) {
+ if (scale_up)
+ err = ufs_qcom_clk_scale_up_pre_change(hba);
+ else
+ err = ufs_qcom_clk_scale_down_pre_change(hba);
+ } else {
+ if (scale_up)
+ err = ufs_qcom_clk_scale_up_post_change(hba);
+ else
+ err = ufs_qcom_clk_scale_down_post_change(hba);
+
+ if (err || !dev_req_params)
+ goto out;
+
+ ufs_qcom_cfg_timers(hba,
+ dev_req_params->gear_rx,
+ dev_req_params->pwr_rx,
+ dev_req_params->hs_rate,
+ false);
+ ufs_qcom_update_bus_bw_vote(host);
+ }
+
+out:
+ return err;
}
static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host)
diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/scsi/ufs/ufs-qcom.h
index 1b71a1b..36249b3 100644
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -35,8 +35,8 @@
#define UFS_QCOM_LIMIT_NUM_LANES_RX 2
#define UFS_QCOM_LIMIT_NUM_LANES_TX 2
-#define UFS_QCOM_LIMIT_HSGEAR_RX UFS_HS_G2
-#define UFS_QCOM_LIMIT_HSGEAR_TX UFS_HS_G2
+#define UFS_QCOM_LIMIT_HSGEAR_RX UFS_HS_G3
+#define UFS_QCOM_LIMIT_HSGEAR_TX UFS_HS_G3
#define UFS_QCOM_LIMIT_PWMGEAR_RX UFS_PWM_G4
#define UFS_QCOM_LIMIT_PWMGEAR_TX UFS_PWM_G4
#define UFS_QCOM_LIMIT_RX_PWR_PWM SLOW_MODE
@@ -64,6 +64,11 @@ enum {
UFS_TEST_BUS_CTRL_2 = 0xF4,
UFS_UNIPRO_CFG = 0xF8,
+ /*
+ * QCOM UFS host controller vendor specific registers
+ * added in HW Version 3.0.0
+ */
+ UFS_AH8_CFG = 0xFC,
};
/* QCOM UFS host controller vendor specific debug registers */
@@ -83,6 +88,11 @@ enum {
UFS_UFS_DBG_RD_EDTL_RAM = 0x1900,
};
+#define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x) (0x000 + x)
+#define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x) (0x400 + x)
+
+/* bit definitions for REG_UFS_CFG1 register */
+#define QUNIPRO_SEL UFS_BIT(0)
#define TEST_BUS_EN BIT(18)
#define TEST_BUS_SEL GENMASK(22, 19)
@@ -131,6 +141,12 @@ enum ufs_qcom_phy_init_type {
(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_ICE_REGS_EN | \
UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
+/* QUniPro Vendor specific attributes */
+#define DME_VS_CORE_CLK_CTRL 0xD002
+/* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */
+#define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT BIT(8)
+#define DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK 0xFF
+
static inline void
ufs_qcom_get_controller_revision(struct ufs_hba *hba,
u8 *major, u16 *minor, u16 *step)
@@ -196,6 +212,12 @@ struct ufs_qcom_host {
* controller supports the QUniPro mode.
*/
#define UFS_QCOM_CAP_QUNIPRO UFS_BIT(0)
+
+ /*
+ * Set this capability if host controller can retain the secure
+ * configuration even after UFS controller core power collapse.
+ */
+ #define UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE UFS_BIT(1)
u32 caps;
struct phy *generic_phy;
@@ -208,7 +230,12 @@ struct ufs_qcom_host {
struct clk *tx_l1_sync_clk;
bool is_lane_clks_enabled;
+ void __iomem *dev_ref_clk_ctrl_mmio;
+ bool is_dev_ref_clk_enabled;
struct ufs_hw_version hw_ver;
+
+ u32 dev_ref_clk_en_mask;
+
/* Bitmask for enabling debug prints */
u32 dbg_print_en;
struct ufs_qcom_testbus testbus;
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 52f9dad..131c720 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5420,6 +5420,10 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
if (!head || list_empty(head))
goto out;
+ ret = ufshcd_vops_clk_scale_notify(hba, scale_up, PRE_CHANGE);
+ if (ret)
+ return ret;
+
list_for_each_entry(clki, head, list) {
if (!IS_ERR_OR_NULL(clki->clk)) {
if (scale_up && clki->max_freq) {
@@ -5450,7 +5454,9 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up)
dev_dbg(hba->dev, "%s: clk: %s, rate: %lu\n", __func__,
clki->name, clk_get_rate(clki->clk));
}
- ufshcd_vops_clk_scale_notify(hba);
+
+ ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE);
+
out:
return ret;
}
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 471c667..2570d94 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -223,8 +223,10 @@ struct ufs_clk_info {
bool enabled;
};
-#define PRE_CHANGE 0
-#define POST_CHANGE 1
+enum ufs_notify_change_status {
+ PRE_CHANGE,
+ POST_CHANGE,
+};
struct ufs_pa_layer_attr {
u32 gear_rx;
@@ -266,13 +268,17 @@ struct ufs_hba_variant_ops {
int (*init)(struct ufs_hba *);
void (*exit)(struct ufs_hba *);
u32 (*get_ufs_hci_version)(struct ufs_hba *);
- void (*clk_scale_notify)(struct ufs_hba *);
- int (*setup_clocks)(struct ufs_hba *, bool);
+ int (*clk_scale_notify)(struct ufs_hba *, bool,
+ enum ufs_notify_change_status);
+ int (*setup_clocks)(struct ufs_hba *, bool);
int (*setup_regulators)(struct ufs_hba *, bool);
- int (*hce_enable_notify)(struct ufs_hba *, bool);
- int (*link_startup_notify)(struct ufs_hba *, bool);
+ int (*hce_enable_notify)(struct ufs_hba *,
+ enum ufs_notify_change_status);
+ int (*link_startup_notify)(struct ufs_hba *,
+ enum ufs_notify_change_status);
int (*pwr_change_notify)(struct ufs_hba *,
- bool, struct ufs_pa_layer_attr *,
+ enum ufs_notify_change_status status,
+ struct ufs_pa_layer_attr *,
struct ufs_pa_layer_attr *);
int (*suspend)(struct ufs_hba *, enum ufs_pm_op);
int (*resume)(struct ufs_hba *, enum ufs_pm_op);
@@ -708,17 +714,18 @@ static inline u32 ufshcd_vops_get_ufs_hci_version(struct ufs_hba *hba)
return ufshcd_readl(hba, REG_UFS_VERSION);
}
-static inline void ufshcd_vops_clk_scale_notify(struct ufs_hba *hba)
+static inline int ufshcd_vops_clk_scale_notify(struct ufs_hba *hba,
+ bool up, enum ufs_notify_change_status status)
{
if (hba->vops && hba->vops->clk_scale_notify)
- return hba->vops->clk_scale_notify(hba);
+ return hba->vops->clk_scale_notify(hba, up, status);
+ return 0;
}
static inline int ufshcd_vops_setup_clocks(struct ufs_hba *hba, bool on)
{
if (hba->vops && hba->vops->setup_clocks)
return hba->vops->setup_clocks(hba, on);
-
return 0;
}
--
1.8.5.2
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/