Re: [PATCH v12 3/6] fpga: add simple-fpga-bus

[Josh Cartwright]

On Wed, Oct 28, 2015 at 12:59:16PM -0500, Josh Cartwright wrote:
> On Wed, Oct 28, 2015 at 12:03:41PM -0500, atull wrote:
> > On Wed, 28 Oct 2015, Moritz Fischer wrote:
> > 
> > > On Wed, Oct 28, 2015 at 9:18 AM, Josh Cartwright <joshc@xxxxxx> wrote:
> > > > On Wed, Oct 28, 2015 at 08:37:51AM -0700, Moritz Fischer wrote:
> > > >> On Wed, Oct 28, 2015 at 3:07 AM, Josh Cartwright <joshc@xxxxxx> wrote:
> > > >> > On Tue, Oct 27, 2015 at 05:09:12PM -0500, atull@xxxxxxxxxxxxxxxxxxxxx wrote:
> > > >> >> From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
> > > >> >>
> > > >> >> The Simple FPGA bus uses the FPGA Manager Framework and the
> > > >> >> FPGA Bridge Framework to provide a manufactorer-agnostic
> > > >> >> interface for reprogramming FPGAs that is Device Tree
> > > >> >> Overlays-based.
> > > >> >
> > > >> > Do you intend the "simple-fpga-bus" to be used on Zynq as well?  The
> > > >> > whole concept of the socfpga's "FPGA Bridge" doesn't map to the Zynq at
> > > >> > all, from what I can tell.
> > > >>
> > > >> For Zynq the zynq-fpga driver takes care of the level shifters on full
> > > >> reconfiguration,
> > > >> and doesn't for partial reconfiguration. Now depending on which parts
> > > >> of the fabric
> > > >> are partial reconfigured (say AXI masters), one might run into issues
> > > >> with a setup like that.
> > > >>
> > > >> My first plan was to counter that by using zynq-reset to hold the
> > > >> reset high during
> > > >> reconfiguration of that part of the FPGA.
> > > >>
> > > >> I'm happy to rethink that part and maybe redo the level shifters and
> > > >> resets together in a bridge
> > > >> driver under devicetree control gives finer grained control.
> > > >
> > > > There is already a framework which is used to describe and manipulate
> > > > level shifting/other IO properties, and that is pinctrl, and if we
> > > > wanted to use an appropriate abstraction, I think pinctrl would be the
> > > > best bet.
> > > 
> > > Alright, I'll investigate that. Again, for the non-partial reconfig
> > > case I'm happy
> > > with the behavior as implemented, for the partial reconfig I just
> > > haven't run into
> > > issues with not dealing with the level shifters.
> > 
> > Are you suggesting pinctrl instead of introducing a FPGA Bridge Framework?
> 
> I'm suggesting that for the set of operations/configuration states that
> need to be managed _for the Zynq[1]_ during reprogramming, I think
> pinctrl might be a good fit.
> 
> But the pinctrl state activation would happen in the context of the zynq
> fpga_mgr_ops write

*grr*... in the context of the zynq's write_init(), and write_complete()
callbacks.

  Josh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/