On 29.10.2015 13:58, Alim Akhtar wrote:Sorry, I don't have access to vendor code that you are looking into, so won't be able to comment on that.
RTC found in s2mps15 is almost same as one found on s2mps14/13
with few differences in RTC_UPDATE register fields, like
bit fields are changed for WUDR and AUDR.
This patch add required changes to enable s2mps15 rtc timer.
Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
---
drivers/rtc/rtc-s5m.c | 20 ++++++++++++++++++--
include/linux/mfd/samsung/rtc.h | 4 ++++
2 files changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index f2504b4eef34..0d106a99958f 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -188,6 +188,7 @@ static inline int s5m_check_peding_alarm_interrupt(struct s5m_rtc_info *info,
ret = regmap_read(info->regmap, S5M_RTC_STATUS, &val);
val &= S5M_ALARM0_STATUS;
break;
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
ret = regmap_read(info->s5m87xx->regmap_pmic, S2MPS14_REG_ST2,
@@ -223,6 +224,9 @@ static inline int s5m8767_rtc_set_time_reg(struct s5m_rtc_info *info)
if (info->device_type == S5M8763X || info->device_type == S5M8767X)
data |= S5M_RTC_TIME_EN_MASK;
+ if (info->device_type == S2MPS15X)
+ data |= S2MPS15_RTC_WUDR_MASK;
+
You are setting here bit 1 and bit 4. However vendor code sets only bit
4 (called WUDR there). That's confusing. Why the difference? Or maybe I
am looking at wrong vendor tree (SM-G920F)?
No they are not, AUDR on s2mps13 is bit:1 where as it is bit:4 on s2mps15.ret = regmap_write(info->regmap, info->regs->rtc_udr_update, data);
if (ret < 0) {
dev_err(info->dev, "failed to write update reg(%d)\n", ret);
@@ -252,6 +256,9 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
case S5M8767X:
data &= ~S5M_RTC_TIME_EN_MASK;
break;
+ case S2MPS15X:
+ data |= S2MPS15_RTC_AUDR_MASK;
+ break;
case S2MPS14X:
data |= S2MPS_RTC_RUDR_MASK;
break;
Another difference: you are setting here exactly the same values as
S2MPS13 - bit 1 and bit 4. However vendor code sets only bit 4 (called
WUDR there)?
What exactly is necessary to update alarm and time registers on S2MPS15?As explained above in example, it is required to update the 'write alarm buffer(AUDR)' and 'write time buffer(WUDR)' bits in-order to get rtc working.
uhh...will change.@@ -275,7 +282,6 @@ static inline int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
if (info->device_type == S2MPS13X)
regmap_update_bits(info->regmap, info->regs->rtc_udr_update,
S2MPS13_RTC_AUDR_MASK, 0);
-
This is not related to the patch.
Best regards,Thanks again.
Krzysztof
--
return ret;
}
@@ -317,7 +323,8 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
u8 data[info->regs->regs_count];
int ret;
- if (info->device_type == S2MPS14X || info->device_type == S2MPS13X) {
+ if (info->device_type == S2MPS15X || info->device_type == S2MPS14X ||
+ info->device_type == S2MPS13X) {
ret = regmap_update_bits(info->regmap,
info->regs->rtc_udr_update,
S2MPS_RTC_RUDR_MASK, S2MPS_RTC_RUDR_MASK);
@@ -339,6 +346,7 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
s5m8767_data_to_tm(data, tm, info->rtc_24hr_mode);
@@ -366,6 +374,7 @@ static int s5m_rtc_set_time(struct device *dev, struct rtc_time *tm)
s5m8763_tm_to_data(tm, data);
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
ret = s5m8767_tm_to_data(tm, data);
@@ -414,6 +423,7 @@ static int s5m_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
s5m8767_data_to_tm(data, &alrm->time, info->rtc_24hr_mode);
@@ -463,6 +473,7 @@ static int s5m_rtc_stop_alarm(struct s5m_rtc_info *info)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
for (i = 0; i < info->regs->regs_count; i++)
@@ -508,6 +519,7 @@ static int s5m_rtc_start_alarm(struct s5m_rtc_info *info)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
data[RTC_SEC] |= ALARM_ENABLE_MASK;
@@ -548,6 +560,7 @@ static int s5m_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
break;
case S5M8767X:
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
s5m8767_tm_to_data(&alrm->time, data);
@@ -631,6 +644,7 @@ static int s5m8767_rtc_init_reg(struct s5m_rtc_info *info)
ret = regmap_raw_write(info->regmap, S5M_ALARM0_CONF, data, 2);
break;
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
data[0] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT);
@@ -679,6 +693,7 @@ static int s5m_rtc_probe(struct platform_device *pdev)
return -ENOMEM;
switch (platform_get_device_id(pdev)->driver_data) {
+ case S2MPS15X:
case S2MPS14X:
case S2MPS13X:
regmap_cfg = &s2mps14_rtc_regmap_config;
@@ -805,6 +820,7 @@ static const struct platform_device_id s5m_rtc_id[] = {
{ "s5m-rtc", S5M8767X },
{ "s2mps13-rtc", S2MPS13X },
{ "s2mps14-rtc", S2MPS14X },
+ { "s2mps15-rtc", S2MPS15X },
{ },
};
MODULE_DEVICE_TABLE(platform, s5m_rtc_id);
diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h
index 29c30ac36020..0be45fccc52b 100644
--- a/include/linux/mfd/samsung/rtc.h
+++ b/include/linux/mfd/samsung/rtc.h
@@ -107,6 +107,10 @@ enum s2mps_rtc_reg {
#define S2MPS_RTC_WUDR_MASK (1 << S2MPS_RTC_WUDR_SHIFT)
#define S2MPS13_RTC_AUDR_SHIFT 1
#define S2MPS13_RTC_AUDR_MASK (1 << S2MPS13_RTC_AUDR_SHIFT)
+#define S2MPS15_RTC_AUDR_SHIFT 4
+#define S2MPS15_RTC_AUDR_MASK (1 << S2MPS15_RTC_AUDR_SHIFT)
+#define S2MPS15_RTC_WUDR_SHIFT 1
+#define S2MPS15_RTC_WUDR_MASK (1 << S2MPS15_RTC_WUDR_SHIFT)
#define S2MPS_RTC_RUDR_SHIFT 0
#define S2MPS_RTC_RUDR_MASK (1 << S2MPS_RTC_RUDR_SHIFT)
#define RTC_TCON_SHIFT 1