[PATCH 1/2] dt: power: Add support for TI BQ24261 charger

[Ramakrishna Pallala]

This patch adds the device tree documentation for TI BQ24261 charger.

Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@xxxxxxxxx>
Signed-off-by: Jennt TC <jenny.tc@xxxxxxxxx>
---
 .../devicetree/bindings/power/bq24261.txt          |   34 ++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/bq24261.txt

diff --git a/Documentation/devicetree/bindings/power/bq24261.txt b/Documentation/devicetree/bindings/power/bq24261.txt
new file mode 100644
index 0000000..e18f6dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/bq24261.txt
@@ -0,0 +1,34 @@
+Binding for TI bq24261 Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+    * "ti,bq24261"
+- reg: integer, i2c address of the device.
+- ti,battery-regulation-voltage: integer, maximum charging voltage in uV.
+- ti,charge-current: integer, maximum charging current in uA.
+- ti,termination-current: integer, charge will be terminated when current in
+    constant-voltage phase drops below this value (in uA).
+
+Optional properties:
+- ti,max-charge-current: integer, maximum charging current (in uA);
+- ti,max-charge-voltage: integer, maximum charging voltage (in uV);
+- ti,min-charge-temperature: integer, minimum charging temperature (in DegC);
+- ti,max-charge-temperature: integer, maximum charging temperature (in DegC).
+- ti,thermal-sensing: integer, enable(1) or disable(0) JEITA thermal control.
+
+Example:
+
+bq24261 {
+        compatible = "ti,bq24261";
+        reg = <0x6b>;
+
+        ti,battery-regulation-voltage = <4200>;
+        ti,charge-current = <1000>;
+        ti,termination-current = <128>;
+
+        ti,max-charge-current = <3000>;
+        ti,max-charge-voltage = <4350>;
+        ti,min-charge-temperature = <0>;
+        ti,max-charge-temperature = <60>;
+        ti,thermal-sensing = <1>;
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/