[PATCH v5 1/5] Documentation: tps65912: Add DT bindings for the TPS65912 PMIC

[Andrew F. Davis]

The TPS65912 PMIC contains several regulators and a GPIO controller.
Add bindings for the TPS65912 PMIC.

Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---
 .../devicetree/bindings/gpio/gpio-tps65912.txt     | 16 +++++++
 Documentation/devicetree/bindings/mfd/tps65912.txt | 51 ++++++++++++++++++++++
 .../bindings/regulator/tps65912-regulator.txt      | 28 ++++++++++++
 3 files changed, 95 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/tps65912-regulator.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
new file mode 100644
index 0000000..0c5c05c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
@@ -0,0 +1,16 @@
+* TPS65912 GPIO Controller bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65912-gpio".
+ - gpio-controller : Marks the device node as a GPIO Controller.
+ - #gpio-cells : Should be two.  The first cell is the pin number and
+     the second cell is used to specify flags.
+     See include/dt-bindings/gpio/gpio.h for possible values.
+
+Example:
+
+	gpio4: tps65912_gpio {
+		compatible = "ti,tps65912-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
new file mode 100644
index 0000000..da5804a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
@@ -0,0 +1,51 @@
+* TPS65912 Power Management Integrated Circuit bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65912".
+ - reg : Slave address or chip select number (I2C / SPI).
+ - interrupt-parent : The parent interrupt controller.
+ - interrupts : The interrupt line the device is connected to.
+ - interrupt-controller : Marks the device node as an interrupt controller.
+ - #interrupt-cells: The number of cells to describe an IRQ, this should be 2.
+     The first cell is the IRQ number.
+     The second cell is the flags, encoded as the trigger masks from
+     ../interrupt-controller/interrupts.txt
+
+Additional nodes defined in:
+ - Regulators: ../regulator/tps65912-regulator.txt
+ - GPIO: ../gpio/gpio-tps65912.txt.
+
+Example:
+
+	pmic: tps65912@2d {
+		compatible = "ti,tps65912";
+		reg = <0x2d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			compatible = "ti,tps65912-regulator";
+
+			dcdc1 {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <912000>;
+				regulator-max-microvolt = <1144000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+			};
+		};
+
+		gpio4: tps65912_gpio {
+			compatible = "ti,tps65912-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
new file mode 100644
index 0000000..4cd05fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
@@ -0,0 +1,28 @@
+* TPS65912 regulator bindings
+
+Required properties:
+ - compatible: "ti,tps65912-regulator"
+ - list of regulators provided by this controller, must be named
+     after their hardware counterparts: dcdc[1-4] and ldo[1-10]
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+	tps65912_regulator {
+		compatible = "ti,tps65912-regulator";
+
+		dcdc1 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1 {
+			regulator-name = "ldo1";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+		};
+	};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/