Re: [PATCH 09/19] drm: sun4i: Add DT bindings documentation

[Rob Herring]

On Fri, Oct 30, 2015 at 9:20 AM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> The display pipeline of the Allwinner A10 is involving several loosely
> coupled components.
>
> Add a documentation for the bindings.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/drm/sunxi/sun4i-drm.txt    | 122 +++++++++++++++++++++

bindings/display/sunxi/ please.

>  1 file changed, 122 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/drm/sunxi/sun4i-drm.txt
>
> diff --git a/Documentation/devicetree/bindings/drm/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/drm/sunxi/sun4i-drm.txt
> new file mode 100644
> index 000000000000..dbdccef787b4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/drm/sunxi/sun4i-drm.txt
> @@ -0,0 +1,122 @@
> +Allwinner A10 Display Pipeline
> +==============================
> +
> +The Allwinner A10 Display pipeline is composed of several components
> +that are going to be documented below:
> +
> +TV Encoder
> +----------
> +
> +The TV Encoder supports the composite and VGA output. It is one end of
> +the pipeline.
> +
> +Required properties:
> + - compatible: value should be "allwinner,sun4i-a10-tv-encoder".
> + - reg: base address and size of memory-mapped region
> + - clocks: the clocks driving the TV encoder
> +
> +TCON
> +----
> +
> +The TCON acts as a CRTC and encoder for RGB / LVDS interfaces.

Lets not carry DRMs old CRTC name into DT bindings. Just say "display
controller."

> +
> +Required properties:
> + - compatible: value should be "allwinner,sun4i-a10-tcon".
> + - reg: base address and size of memory-mapped region
> + - interrupts: interrupt associated to this IP
> + - clocks: phandles to the clocks feeding the TCON. Three are needed:
> +   - 'ahb': the interface clocks
> +   - 'tcon-ch0': The clock driving the TCON channel 0
> +   - 'tcon-ch1': The clock driving the TCON channel 0
> +
> + - clock-names: the clock names mentionned above

typo

> + - clock-output-names: Name of the pixel clock created
> +
> +
> +Display Engine Backend
> +----------------------
> +
> +The display engine backend exposes layers and sprites to the
> +system. It's split into two components, the frontend and backend, the
> +frontend doing formats conversion, scaling, deinterlacing, while the
> +backend actually manages the layers.
> +
> +Required properties:
> +  - compatible: value must be one of:
> +    * allwinner,sun5i-a13-display-engine
> +
> +  - reg: base address and size of the memory-mapped region. Two are needed:
> +    * backend0: registers of the display engine backend
> +    * frontend0: registers of the display engine frontend

Why the zeros? I think they should be dropped.

> +  - reg_names: the region names mentionned above.

typo

> +
> +  - interrupts: frontend interrupt phandle
> +
> +  - clocks: phandles to the clocks feeding the frontend and backend
> +    * backend0-bus: the backend interface clock
> +    * backend0-mod: the backend module clock
> +    * backend0-ram: the backend DRAM clock
> +    * frontend0-bus: the frontend interface clock
> +    * frontend0-mod: the frontend module clock
> +    * frontend0-ram: the frontend DRAM clock

Same comment on zeros.

> +  - clock-names: the clock names mentionned above

typo

> +
> +  - resets: phandles to the reset controllers. Two are needed:
> +    * backend0: backend reset controller
> +    * frontend0: frontend reset controller
> +  - reset-names: the reset names mentionned above

typo. At least you are consistent (unlike English grammar rules). ;)

> +
> +  - allwinner,tcon: phandle to the TCON in our pipeline

Use of-graph or just let the relationship live in the driver. If there
is only 1 instance of the blocks, the latter is fine.

> +
> +Optional properties:
> +  - allwinner,tv-encoder: phandle to the TV Encoder in our pipeline
> +  - allwinner,panel: phandle to the panel used in our RGB interface

Use of-graph please.

> +
> +Example:
> +
> +panel: panel {
> +       compatible = "olimex,lcd-olinuxino-43-ts";
> +};
> +
> +tve: encoder@01c0a000 {
> +       compatible = "allwinner,sun4i-a10-tv-encoder";
> +       reg = <0x01c0a000 0x1000>;
> +       clocks = <&ahb_gates 34>;
> +};
> +
> +tcon: lcd-controller@01c0c000 {
> +       compatible = "allwinner,sun4i-a10-tcon";
> +       reg = <0x01c0c000 0x1000>;
> +       interrupts = <44>;
> +       clocks = <&ahb_gates 36>,
> +                <&tcon_ch0_clk>,
> +                <&tcon_ch1_clk>;
> +       clock-names = "ahb",
> +                     "tcon-ch0",
> +                     "tcon-ch1";
> +       clock-output-names = "tcon-pixel-clock";
> +};
> +
> +de: display-engine@01e00000 {
> +       compatible = "allwinner,sun5i-a13-display-engine";
> +       reg = <0x01e00000 0x20000>,
> +             <0x01e60000 0x10000>;
> +       reg-names = "frontend0",
> +                   "backend0";
> +       interrupts = <47>;
> +       interrupt-names = "engine0";
> +       clocks = <&ahb_gates 46>, <&de_fe_clk>,
> +                <&dram_gates 25>, <&ahb_gates 44>,
> +                <&de_be_clk>, <&dram_gates 26>;
> +       clock-names = "frontend0-bus", "frontend0-mod",
> +                     "frontend0-ram", "backend0-bus",
> +                     "backend0-mod", "backend0-ram";
> +       resets = <&de_fe_clk>,
> +                <&de_be_clk>;
> +       reset-names = "frontend0",
> +                     "backend0";
> +
> +       allwinner,tcon = <&tcon>;
> +       allwinner,tv-encoder = <&tve>;
> +       allwinner,panel = <&panel>;
> +};
> --
> 2.6.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/