Re: [PATCH 1/2] Documentation: afe4404: Add DT bindings for the AFE4404 heart monitor

From: Rob Herring
Date: Sat Oct 31 2015 - 14:44:45 EST


gmail thinks this is spam BTW.

On Sat, Oct 31, 2015 at 11:31 AM, Andrew F. Davis <afd@xxxxxx> wrote:
> Add the TI afe4404 heart monitor DT bindings documentation.
> Create health directory created under iio.
>
> Signed-off-by: Andrew F. Davis <afd@xxxxxx>
> ---
> .../devicetree/bindings/iio/health/afe4404.txt | 27 ++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
> new file mode 100644
> index 0000000..d377033
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
> @@ -0,0 +1,27 @@
> +* Texas Instruments AFE4404 Heart rate and Pulse Oximeter
> +
> +Required properties:
> + - compatible : Should be "ti,afe4404".
> + - reg : I2C address of the device.
> + - led-supply : Regulator supply to the device.

Is led correct name or copy-n-paste? The datasheet has tx_sup and
rx_sup for supplies.

> + - interrupt-parent : Phandle to he parent interrupt controller.
> + - interrupts : The interrupt line the device ADC_RDY pin is connected to.
> +
> +Optional properties:
> + - reset-gpios : GPIO used to reset the device.
> +
> +Example:
> +
> +&i2c2 {
> + heart_mon@58 {
> + compatible = "ti,afe4404";
> + reg = <0x58>;
> +
> + led-supply = <&vbat>;
> +
> + interrupt-parent = <&gpio1>;
> + interrupts = <28 IRQ_TYPE_EDGE_RISING>;
> +
> + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
> + };
> +};
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/