Re: [PATCH 1/3] PM / OPP: Add "opp-supported-hw" binding

From: Viresh Kumar
Date: Mon Nov 02 2015 - 21:30:18 EST

On 30-10-15, 15:18, Stephen Boyd wrote:
> A side-note. I wonder if it would be better style to have the
> node name be:
>
> opp@600000000 {
>
> At least it seems that the assumption is we can store all the
> possible combinations of OPP values for a particular frequency in
> the same node. Following this style would make dt compilation
> fail if two nodes have the same frequency.

From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Date: Tue, 3 Nov 2015 07:51:09 +0530
Subject: [PATCH] PM / OPP: Rename OPP nodes as opp@<opp-hz>

It would be better to name OPP nodes as opp@<opp-hz> as that will ensure
that multiple DT nodes don't contain the same frequency. Of course we
expect the writer to name the node with its opp-hz frequency and not any
other frequency.

And that will let the compile error out if multiple nodes are using the
same opp-hz frequency.

Suggested-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
Documentation/devicetree/bindings/opp/opp.txt | 38 +++++++++++++--------------
1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 8d4a4075d634..3af2eca7212a 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -183,20 +183,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
compatible = "operating-points-v2";
opp-shared;

- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
- opp01 {
+ opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
- opp02 {
+ opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
clock-latency-ns = <290000>;
@@ -262,20 +262,20 @@ independently.
* independently.
*/

- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
- opp01 {
+ opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
- opp02 {
+ opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000;
@@ -338,20 +338,20 @@ DVFS state together.
compatible = "operating-points-v2";
opp-shared;

- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
- opp01 {
+ opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
- opp02 {
+ opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000>;
@@ -364,20 +364,20 @@ DVFS state together.
compatible = "operating-points-v2";
opp-shared;

- opp10 {
+ opp@1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1045000 1050000 1055000>;
opp-microamp = <95000>;
clock-latency-ns = <400000>;
opp-suspend;
};
- opp11 {
+ opp@1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1075000>;
opp-microamp = <100000>;
clock-latency-ns = <400000>;
};
- opp12 {
+ opp@1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1010000 1100000 1110000>;
opp-microamp = <95000>;
@@ -404,7 +404,7 @@ Example 4: Handling multiple regulators
compatible = "operating-points-v2";
opp-shared;

- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000>, /* Supply 0 */
<960000>, /* Supply 1 */
@@ -417,7 +417,7 @@ Example 4: Handling multiple regulators

/* OR */

- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
@@ -430,7 +430,7 @@ Example 4: Handling multiple regulators

/* OR */

- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
@@ -462,7 +462,7 @@ Example 5: opp-supported-hw
status = "okay";
opp-shared;

- opp00 {
+ opp@600000000 {
/*
* Supports all substrate and process versions for 0xF
* cuts, i.e. only first four cuts.
@@ -473,7 +473,7 @@ Example 5: opp-supported-hw
...
};

- opp01 {
+ opp@800000000 {
/*
* Supports:
* - cuts: only one, 6th cut (represented by 6th bit).
@@ -506,7 +506,7 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>, turbo-mode-<name>,
compatible = "operating-points-v2";
opp-shared;

- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt-slow = <900000 915000 925000>;
opp-microvolt-fast = <970000 975000 985000>;
@@ -516,7 +516,7 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>, turbo-mode-<name>,
opp-suspend-slow; /* Will be used as suspend-opp only if 'slow' is chosen */
};

- opp01 {
+ opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */
<910000 925000 935000>; /* Supply vcc1 */
--
viresh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/