RE: [PATCH 0/3] Fix rcar-pcie for arm64

[Phil Edworthy]

Hi Wolfram,

On 02 November 2015 21:33, Wolfram wrote:
> > The first patches fixes the build problem, and the second patch reverts the
> > patch that removed the driver from arm64 builds. The final patch add a compat
> > string for the r8a7795 (arm64) device.
> 
> Thanks. I will test them next week when I have access to my board again.
It's worth mentioning that I had some troubles on my Salvator-X board
with some cards not being able to link up. Since my board has a socketed chip
and the board was designed for it not to be via a socket, and this is such a low
level functionality, I think this is HW related. My Intel Gigabit CT Desktop card
always works.
Also note that this PCIe controller only supports a 32-bit AXI address range,
so you need to limit memory to within the 4GiB address space. As far as I am
aware, there is no way to limit the dma mask that card drivers use via the
controller. The plan is to add support this via IOMMU.
 
> > Apart from patches to add the PCIe clock and DT nodes, I had to revert these
> > patches to get it to work on arm64:
> >  f075915ac0b1 ("PCI/MSI: Drop domain field from msi_controller")
> >  d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain use struct
> device::msi_domain")
> 
> Does that solve the MSI problems you mentioned?
It avoids the problem, but I have a proper fix in the pipeline which just needs
more testing.

Thanks
Phil

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/