[PATCH v2 1/4] perf test: Keep test result clean if '-v' not set

[Wang Nan]

According to [1], 'perf state' should avoid output too much information
if '-v' not set, only 'Ok', 'FAIL' or 'Skip' need to be printed.

This patch removes sereval stderr output to make output clean.

Before this patch:
 # perf test dummy
 23: Test using a dummy software event to keep tracking       : (not supported) Ok

After this patch:
 # perf test dummy
 23: Test using a dummy software event to keep tracking       : Skip

[1] http://lkml.kernel.org/r/20151020134155.GE4400@xxxxxxxxxx

Signed-off-by: Wang Nan <wangnan0@xxxxxxxxxx>
Acked-by: Namhyung Kim <namhyung@xxxxxxxxxx>
Cc: Arnaldo Carvalho de Melo <acme@xxxxxxxxxx>
Link: http://lkml.kernel.org/n/tip-446450727-218554-1-git-send-email-wangnan0@xxxxxxxxxx
---
 tools/perf/tests/attr.c            |  3 +--
 tools/perf/tests/code-reading.c    |  8 ++++----
 tools/perf/tests/keep-tracking.c   |  4 ++--
 tools/perf/tests/llvm.c            | 11 ++++-------
 tools/perf/tests/switch-tracking.c |  4 ++--
 5 files changed, 13 insertions(+), 17 deletions(-)

diff --git a/tools/perf/tests/attr.c b/tools/perf/tests/attr.c
index 2dfc9ad..638875a 100644
--- a/tools/perf/tests/attr.c
+++ b/tools/perf/tests/attr.c
@@ -171,6 +171,5 @@ int test__attr(void)
 	    !lstat(path_perf, &st))
 		return run_dir(path_dir, path_perf);
 
-	fprintf(stderr, " (omitted)");
-	return 0;
+	return TEST_SKIP;
 }
diff --git a/tools/perf/tests/code-reading.c b/tools/perf/tests/code-reading.c
index 49b1959..a767a64 100644
--- a/tools/perf/tests/code-reading.c
+++ b/tools/perf/tests/code-reading.c
@@ -613,16 +613,16 @@ int test__code_reading(void)
 	case TEST_CODE_READING_OK:
 		return 0;
 	case TEST_CODE_READING_NO_VMLINUX:
-		fprintf(stderr, " (no vmlinux)");
+		pr_debug("no vmlinux\n");
 		return 0;
 	case TEST_CODE_READING_NO_KCORE:
-		fprintf(stderr, " (no kcore)");
+		pr_debug("no kcore\n");
 		return 0;
 	case TEST_CODE_READING_NO_ACCESS:
-		fprintf(stderr, " (no access)");
+		pr_debug("no access\n");
 		return 0;
 	case TEST_CODE_READING_NO_KERNEL_OBJ:
-		fprintf(stderr, " (no kernel obj)");
+		pr_debug("no kernel obj\n");
 		return 0;
 	default:
 		return -1;
diff --git a/tools/perf/tests/keep-tracking.c b/tools/perf/tests/keep-tracking.c
index 4d4b983..a2e2269 100644
--- a/tools/perf/tests/keep-tracking.c
+++ b/tools/perf/tests/keep-tracking.c
@@ -90,8 +90,8 @@ int test__keep_tracking(void)
 	evsel->attr.enable_on_exec = 0;
 
 	if (perf_evlist__open(evlist) < 0) {
-		fprintf(stderr, " (not supported)");
-		err = 0;
+		pr_debug("Unable to open dummy and cycles event\n");
+		err = TEST_SKIP;
 		goto out_err;
 	}
 
diff --git a/tools/perf/tests/llvm.c b/tools/perf/tests/llvm.c
index 52d5597..512d362 100644
--- a/tools/perf/tests/llvm.c
+++ b/tools/perf/tests/llvm.c
@@ -36,7 +36,7 @@ static int test__bpf_parsing(void *obj_buf, size_t obj_buf_sz)
 static int test__bpf_parsing(void *obj_buf __maybe_unused,
 			     size_t obj_buf_sz __maybe_unused)
 {
-	fprintf(stderr, " (skip bpf parsing)");
+	pr_debug("Skip bpf parsing\n");
 	return 0;
 }
 #endif
@@ -55,7 +55,7 @@ int test__llvm(void)
 	 * and clang is not found in $PATH, and this is not perf test -v
 	 */
 	if (verbose == 0 && !llvm_param.user_set_param && llvm__search_clang()) {
-		fprintf(stderr, " (no clang, try 'perf test -v LLVM')");
+		pr_debug("No clang and no verbosive, skip this test\n");
 		return TEST_SKIP;
 	}
 
@@ -86,11 +86,8 @@ int test__llvm(void)
 	err = llvm__compile_bpf("-", &obj_buf, &obj_buf_sz);
 
 	verbose = old_verbose;
-	if (err) {
-		if (!verbose)
-			fprintf(stderr, " (use -v to see error message)");
-		return -1;
-	}
+	if (err)
+		return TEST_FAIL;
 
 	err = test__bpf_parsing(obj_buf, obj_buf_sz);
 	free(obj_buf);
diff --git a/tools/perf/tests/switch-tracking.c b/tools/perf/tests/switch-tracking.c
index e698742..a02af50 100644
--- a/tools/perf/tests/switch-tracking.c
+++ b/tools/perf/tests/switch-tracking.c
@@ -366,7 +366,7 @@ int test__switch_tracking(void)
 
 	/* Third event */
 	if (!perf_evlist__can_select_event(evlist, sched_switch)) {
-		fprintf(stderr, " (no sched_switch)");
+		pr_debug("No sched_switch\n");
 		err = 0;
 		goto out;
 	}
@@ -442,7 +442,7 @@ int test__switch_tracking(void)
 	}
 
 	if (perf_evlist__open(evlist) < 0) {
-		fprintf(stderr, " (not supported)");
+		pr_debug("Not supported\n");
 		err = 0;
 		goto out;
 	}
-- 
1.8.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/