Re: [PATCH V1 11/11] arm64, pci, acpi: Support for ACPI based PCI hostbridge init
From: Tomasz Nowicki
Date: Wed Nov 04 2015 - 04:59:37 EST
On 03.11.2015 17:55, Lorenzo Pieralisi wrote:
On Tue, Oct 27, 2015 at 05:38:42PM +0100, Tomasz Nowicki wrote:
[...]
menu "Kernel Features"
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index b3d098b..66cc1ae 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -11,12 +11,15 @@
*/
#include <linux/acpi.h>
+#include <linux/ecam.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/of_platform.h>
+#include <linux/pci-acpi.h>
#include <linux/slab.h>
#include <asm/pci-bridge.h>
@@ -52,35 +55,216 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
}
/*
- * Try to assign the IRQ number from DT when adding a new device
+ * Try to assign the IRQ number from DT/ACPI when adding a new device
*/
int pcibios_add_device(struct pci_dev *dev)
{
- dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+ if (acpi_disabled)
+ dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+#ifdef CONFIG_ACPI
+ else
+ acpi_pci_irq_enable(dev);
+#endif
This series:
http://www.spinics.net/lists/linux-pci/msg45950.html
will allow us to initialize the irq mapping function according to
the boot method, code above is getting cumbersome and it is already
overriden when booting with DT, so we will remove it altogether.
return 0;
}
+#ifdef CONFIG_ACPI
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ struct acpi_pci_root *root = bridge->bus->sysdata;
+
+ ACPI_COMPANION_SET(&bridge->dev, root->device);
+ return 0;
This should be made part of core code IMO.
+}
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+ acpi_pci_add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+ acpi_pci_remove_bus(bus);
+}
Two functions above are identical for arm64, ia64 and x86, I do
not think they belong in arch code.
+static int __init pcibios_assign_resources(void)
+{
+ if (acpi_disabled)
+ return 0;
+
+ pci_assign_unassigned_resources();
+ return 0;
Already commented on this.
+}
/*
- * raw_pci_read/write - Platform-specific PCI config space access.
+ * rootfs_initcall comes after subsys_initcall and fs_initcall_sync,
+ * so we know acpi scan and PCI_FIXUP_FINAL quirks have both run.
*/
-int raw_pci_read(unsigned int domain, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 *val)
+rootfs_initcall(pcibios_assign_resources);
+
+static void __iomem *
+pci_mcfg_dev_base(struct pci_bus *bus, unsigned int devfn, int offset)
{
- return -ENXIO;
+ struct pci_mmcfg_region *cfg;
+
+ cfg = pci_mmconfig_lookup(pci_domain_nr(bus), bus->number);
+ if (cfg && cfg->virt)
+ return cfg->virt +
+ (PCI_MMCFG_BUS_OFFSET(bus->number) | (devfn << 12)) +
+ offset;
+ return NULL;
Why is this code arm64 specific ?
}
-int raw_pci_write(unsigned int domain, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 val)
+struct pci_ops pci_root_ops = {
+ .map_bus = pci_mcfg_dev_base,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+};
+
+#ifdef CONFIG_PCI_MMCONFIG
+static int pci_add_mmconfig_region(struct acpi_pci_root_info *ci)
{
- return -ENXIO;
+ struct pci_mmcfg_region *cfg;
+ struct acpi_pci_root *root;
+ int seg, start, end, err;
+
+ root = ci->root;
+ seg = root->segment;
+ start = root->secondary.start;
+ end = root->secondary.end;
+
+ cfg = pci_mmconfig_lookup(seg, start);
+ if (cfg)
+ return 0;
+
+ cfg = pci_mmconfig_alloc(seg, start, end, root->mcfg_addr);
+ if (!cfg)
+ return -ENOMEM;
+
+ err = pci_mmconfig_inject(cfg);
+ return err;
}
-#ifdef CONFIG_ACPI
+static void pci_remove_mmconfig_region(struct acpi_pci_root_info *ci)
+{
+ struct acpi_pci_root *root = ci->root;
+ struct pci_mmcfg_region *cfg;
+
+ cfg = pci_mmconfig_lookup(root->segment, root->secondary.start);
+ if (cfg)
+ return;
+
+ if (cfg->hot_added)
+ pci_mmconfig_delete(root->segment, root->secondary.start,
+ root->secondary.end);
+}
+#else
+static int pci_add_mmconfig_region(struct acpi_pci_root_info *ci)
+{
+ return 0;
+}
+
+static void pci_remove_mmconfig_region(struct acpi_pci_root_info *ci) { }
+#endif
Ditto.
+
+static int pci_acpi_root_init_info(struct acpi_pci_root_info *ci)
+{
+ return pci_add_mmconfig_region(ci);
+}
+
+static void pci_acpi_root_release_info(struct acpi_pci_root_info *ci)
+{
+ pci_remove_mmconfig_region(ci);
+ kfree(ci);
+}
+
+static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
+{
+ struct resource_entry *entry, *tmp;
+ int ret;
+
+ ret = acpi_pci_probe_root_resources(ci);
+ if (ret < 0)
+ return ret;
Code above is identical on arm64, ia64 and x86.
+
+ resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
+ struct resource *res = entry->res;
+
+ /*
+ * Special handling for ARM IO range
+ * TODO: need to move pci_register_io_range() function out
+ * of drivers/of/address.c for both used by DT and ACPI
+ */
+ if (res->flags & IORESOURCE_IO) {
+ unsigned long port;
+ int err;
+ resource_size_t length = res->end - res->start;
+
+ err = pci_register_io_range(res->start, length);
+ if (err) {
+ resource_list_destroy_entry(entry);
+ continue;
+ }
+
+ port = pci_address_to_pio(res->start);
+ if (port == (unsigned long)-1) {
+ resource_list_destroy_entry(entry);
+ continue;
+ }
+
+ res->start = port;
+ res->end = res->start + length - 1;
+
+ if (pci_remap_iospace(res, res->start) < 0)
+ resource_list_destroy_entry(entry);
+ }
+ }
+
+ return 0;
+}
+
+static struct acpi_pci_root_ops acpi_pci_root_ops = {
+ .pci_ops = &pci_root_ops,
+ .init_info = pci_acpi_root_init_info,
+ .release_info = pci_acpi_root_release_info,
+ .prepare_resources = pci_acpi_root_prepare_resources,
+};
+
/* Root bridge scanning */
struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
{
- /* TODO: Should be revisited when implementing PCI on ACPI */
- return NULL;
+ int node = acpi_get_node(root->device->handle);
+ int domain = root->segment;
+ int busnum = root->secondary.start;
+ struct acpi_pci_root_info *info;
+ struct pci_bus *bus;
+
+ if (domain && !pci_domains_supported) {
+ pr_warn("PCI %04x:%02x: multiple domains not supported.\n",
+ domain, busnum);
+ return NULL;
+ }
+
+ info = kzalloc_node(sizeof(*info), GFP_KERNEL, node);
+ if (!info) {
+ dev_err(&root->device->dev,
+ "pci_bus %04x:%02x: ignored (out of memory)\n",
+ domain, busnum);
+ return NULL;
+ }
+
+ bus = acpi_pci_root_create(root, &acpi_pci_root_ops, info, root);
+
+ /* After the PCI-E bus has been walked and all devices discovered,
+ * configure any settings of the fabric that might be necessary.
+ */
+ if (bus) {
+ struct pci_bus *child;
+
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
+ }
+
+ return bus;
Code above is entirely arch agnostic (apart from what data is passed to
sysdata) and I think there is room for further consolidation with
x86 and ia64, I will have a look into this.
I agree with your comments, currently I do not know how much of it can
be consolidated but I will rework my next version in this direction.
Thanks,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/