Re: [PATCH] h8300: Initialize cleanup and remove module code

[Daniel Lezcano]

On 11/04/2015 08:35 AM, Yoshinori Sato wrote:
> h8300's clocksource driver cleanup.
> - Use CLOCKSOURCE_OF_DECLARE
> - Remove module exit

Hi Yoshinori,

the patches does not apply on tip/timers/core.

Also it seems to contain changes not related to initialization cleanups 
and module code.

I have a few comment above regarding the initialization.

If you can separate the patches, it will be easier to review.

Thanks.

  -- Daniel

> Signed-off-by: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
> ---
>   drivers/clocksource/h8300_timer16.c | 133 ++++++++++++-----------------
>   drivers/clocksource/h8300_timer8.c  | 164 ++++++++++++++----------------------
>   drivers/clocksource/h8300_tpu.c     | 105 ++++++++---------------
>   3 files changed, 151 insertions(+), 251 deletions(-)
>
> diff --git a/drivers/clocksource/h8300_timer16.c b/drivers/clocksource/h8300_timer16.c
> index 82941c1..e2e10cf 100644
> --- a/drivers/clocksource/h8300_timer16.c
> +++ b/drivers/clocksource/h8300_timer16.c
> @@ -17,6 +17,8 @@
>   #include <linux/clk.h>
>   #include <linux/io.h>
>   #include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
>
>   #include <asm/segment.h>
>   #include <asm/irq.h>
> @@ -47,7 +49,6 @@
>   #define ABSOLUTE 1
>
>   struct timer16_priv {
> -	struct platform_device *pdev;
>   	struct clocksource cs;
>   	struct irqaction irqaction;
>   	unsigned long total_cycles;
> @@ -147,43 +148,58 @@ static void timer16_disable(struct clocksource *cs)
>   #define REG_CH   0
>   #define REG_COMM 1
>
> -static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
> +static void __init h8300_16timer_init(struct device_node *node)
>   {
> -	struct resource *res[2];
> +	void __iomem *base[2];
>   	int ret, irq;
>   	unsigned int ch;
> +	struct timer16_priv *p;
> +	struct clk *clk;
> +
> +	clk = of_clk_get(node, 0);
> +	if (IS_ERR(clk)) {
> +		pr_err("failed to get clock for clocksource\n");
> +		return;
> +	}
>
> -	memset(p, 0, sizeof(*p));
> -	p->pdev = pdev;
> +	base[REG_CH] = of_iomap(node, 0);
> +	if (!base[0]) {

if (!base[REG_CH]) {

> +		pr_err("failed to map registers for clocksource\n");
> +		goto free_clk;
> +	}
>
> -	res[REG_CH] = platform_get_resource(p->pdev,
> -					    IORESOURCE_MEM, REG_CH);
> -	res[REG_COMM] = platform_get_resource(p->pdev,
> -					      IORESOURCE_MEM, REG_COMM);
> -	if (!res[REG_CH] || !res[REG_COMM]) {
> -		dev_err(&p->pdev->dev, "failed to get I/O memory\n");
> -		return -ENXIO;
> +	base[REG_COMM] = of_iomap(node, 1);
> +	if (!base[1]) {

if (!base[REG_COMM]) {

> +		pr_err("failed to map registers for clocksource\n");
> +		goto unmap_ch;
>   	}
> -	irq = platform_get_irq(p->pdev, 0);
> +
> +	irq = irq_of_parse_and_map(node, 0);
>   	if (irq < 0) {
> -		dev_err(&p->pdev->dev, "failed to get irq\n");
> -		return irq;
> +		pr_err("failed to get irq for clockevent\n");
> +		goto unmap_comm;
>   	}
>
> -	p->clk = clk_get(&p->pdev->dev, "fck");
> -	if (IS_ERR(p->clk)) {
> -		dev_err(&p->pdev->dev, "can't get clk\n");
> -		return PTR_ERR(p->clk);
> +	p = kzalloc(sizeof(*p), GFP_KERNEL);
> +	if (!p) {
> +		pr_err("failed to allocate memory for clocksource\n");

No need to add an error for an allocation error and as the module 
static, this variable could be static also and initialized directly when 
declared.

> +		goto unmap_comm;
>   	}
> -	of_property_read_u32(p->pdev->dev.of_node, "renesas,channel", &ch);
>
> -	p->pdev = pdev;
> -	p->mapbase = res[REG_CH]->start;
> -	p->mapcommon = res[REG_COMM]->start;
> +	of_property_read_u32(node, "renesas,channel", &ch);
> +
> +	p->mapbase = (unsigned long)base[REG_CH];
> +	p->mapcommon = (unsigned long)base[REG_COMM];
>   	p->enb = 1 << ch;
>   	p->imfa = 1 << ch;
>   	p->imiea = 1 << (4 + ch);
> -	p->cs.name = pdev->name;
> +
> +	p->irqaction.name = node->name;
> +	p->irqaction.handler = timer16_interrupt;
> +	p->irqaction.dev_id = p;
> +	p->irqaction.flags = IRQF_TIMER;
> +
> +	p->cs.name = node->name;
>   	p->cs.rating = 200;
>   	p->cs.read = timer16_clocksource_read;
>   	p->cs.enable = timer16_enable;
> @@ -191,64 +207,23 @@ static int timer16_setup(struct timer16_priv *p, struct platform_device *pdev)
>   	p->cs.mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
>   	p->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
>
> -	ret = request_irq(irq, timer16_interrupt,
> -			  IRQF_TIMER, pdev->name, p);
> +	ret = setup_irq(irq, &p->irqaction);

It is better to keep request_irq.

>   	if (ret < 0) {
> -		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
> -		return ret;
> +		pr_err("failed to request irq %d of clocksource\n", irq);
> +		goto free_priv;
>   	}
>
>   	clocksource_register_hz(&p->cs, clk_get_rate(p->clk) / 8);
> -
> -	return 0;
> -}


--
 <http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/