[PATCH 7/8] ARM: dts: rockchip: assign usbphy480m_src to the new usbphy pll on veyron

[Heiko Stuebner]

Veyron devices try to always set the source for usbphy480m to the usbphy0
that is the phy connected to the otg controller, because the firmware-
default is usbphy1, the ehci-controller connected to the internal camera
that might get turned off way easier to save power.

In the mainline kernel we currently don't use the usbphy480m_src at all,
as it mainly powers the uart0 source that is connected to the bluetooth
component of the wifi/bt combo.

So move that assignment over to the new real pll clock inside the usbphy.

Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
 arch/arm/boot/dts/rk3288-veyron.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index d4263ed..c8329b5 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -410,7 +410,7 @@
 	status = "okay";
 
 	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
-	assigned-clock-parents = <&cru SCLK_OTGPHY0>;
+	assigned-clock-parents = <&usbphy0>;
 	dr_mode = "host";
 };
 
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/