[RFC 3/3] ARM: e3xx: Add header file for pinctrl constants
From: Moritz Fischer
Date: Thu Nov 05 2015 - 18:41:46 EST
This new header file defines pincontrol constants for USRP E3xx to
use from E3xx's DTS file for pincontrol properties option.
Signed-off-by: Moritz Fischer <moritz.fischer@xxxxxxxxx>
---
include/dt-bindings/pinctrl/pinctrl-e3xx.h | 142 +++++++++++++++++++++++++++++
1 file changed, 142 insertions(+)
create mode 100644 include/dt-bindings/pinctrl/pinctrl-e3xx.h
diff --git a/include/dt-bindings/pinctrl/pinctrl-e3xx.h b/include/dt-bindings/pinctrl/pinctrl-e3xx.h
new file mode 100644
index 0000000..7b35ad2
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-e3xx.h
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2015 National Instruments Corp
+ *
+ * This header provides constants for USRP E3xx pinctrl bindings
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#ifndef _DT_BINDINGS_PINCTRL_E3XX_H
+#define _DT_BINDINGS_PINCTRL_E3XX_H
+
+/* Pin names for the E31x usecase */
+#define E31X_TX_BANDSEL_2 "DB_1"
+#define E31X_RX1B_BANDSEL_0 "DB_3"
+#define E31X_RX1B_BANDSEL_1 "DB_5"
+#define E31X_VCTXRX2_V2 "DB_7"
+#define E31X_TX_ENABLE1A "DB_9"
+#define E31X_TX_ENABLE2A "DB_11"
+#define E31X_TX_BANDSEL_0 "DB_12"
+#define E31X_TX_ENABLE1B "DB_13"
+#define E31X_TX_ENABLE2B "DB_15"
+#define E31X_RX1C_BANDSEL_0 "DB_17"
+#define E31X_RX1C_BANDSEL_1 "DB_19"
+#define E31X_VCTXRX2_V1 "DB_21"
+#define E31X_VCTXRX1_V2 "DB_23"
+#define E31X_VCTXRX1_V1 "DB_25"
+#define E31X_VCRX1_V1 "DB_27"
+#define E31X_VCRX1_V2 "DB_29"
+#define E31X_VCRX2_V1 "DB_31"
+#define E31X_VCRX2_V2 "DB_33"
+#define E31X_CAT_CTRL_IN2 "DB_35"
+#define E31X_CAT_CTRL_IN3 "DB_37"
+#define E31X_CAT_CTRL_OUT0 "DB_39"
+#define E31X_CAT_CTRL_OUT1 "DB_41"
+#define E31X_CAT_CTRL_OUT2 "DB_43"
+#define E31X_CAT_CTRL_OUT3 "DB_45"
+/* pin 47 is nc */
+/* pin 49 is nc */
+/* pin 51 is nc */
+/* pin 53 is nc */
+/* pin 55 is nc */
+/* pin 57 is nc */
+/* pin 59 is nc */
+/* pin 61 is nc */
+/* pin 63 is nc */
+/* pin 65 is nc */
+#define E31X_CAT_TXNRX "DB_67"
+#define E31X_CAT_ENABLE "DB_69"
+#define E31X_CAT_ENAGC "DB_71"
+/* pin 73 is nc */
+#define E31X_CAT_P0_D5 "DB_75"
+#define E31X_CAT_P0_D7 "DB_77"
+#define E31X_CAT_P0_D3 "DB_79"
+#define E31X_CAT_P0_D9 "DB_81"
+#define E31X_CAT_P0_D1 "DB_83"
+#define E31X_CAT_P0_D6 "DB_85"
+#define E31X_CAT_P0_D0 "DB_87"
+#define E31X_CAT_P0_D2 "DB_89"
+#define E31X_CAT_P0_D4 "DB_91"
+#define E31X_CAT_P0_D11 "DB_93"
+#define E31X_CAT_P0_D10 "DB_95"
+#define E31X_CAT_P0_D8 "DB_97"
+#define E31X_CAT_RX_FRAME "DB_99"
+#define E31X_CAT_DATA_CLK "DB_101"
+/* pin 103 is nc */
+/* pin 105 is nc */
+#define E31X_RX2_BANDSEL_2 "DB_107"
+#define E31X_RX2_BANDSEL_1 "DB_109"
+#define E31X_RX2_BANDSEL_0 "DB_111"
+#define E31X_RX2C_BANDSEL_1 "DB_113"
+#define E31X_RX2C_BANDSEL_0 "DB_115"
+#define E31X_RX2B_BANDSEL_0 "DB_117"
+#define E31X_RX2B_BANDSEL_1 "DB_119"
+
+/* pin 2 is nc */
+/* pin 4 is nc */
+#define E31X_RX1_BANDSEL_0 "DB_6"
+#define E31X_RX1_BANDSEL_1 "DB_8"
+#define E31X_RX1_BANDSEL_2 "DB_10"
+#define E31X_TX_BANDSEL_1 "DB_14"
+#define E31X_DB_SCL "DB_16"
+#define E31X_DB_SCA "DB_18"
+#define E31X_TUNE_DAC_SYNC_N "DB_20"
+#define E31X_TUNE_DAC_SCLK "DB_22"
+#define E31X_TUNE_DAC_SDIN "DB_24"
+/* pin 26 is nc */
+/* pin 28 is nc */
+#define E31X_VCTCXO_TO_MB "DB_30"
+/* pin 32 is nc */
+/* pin 34 is nc */
+/* pin 36 is nc */
+/* pin 38 is nc */
+#define E31X_CAT_CTRL_OUT4 "DB_40"
+#define E31X_CAT_CTRL_OUT5 "DB_42"
+#define E31X_CAT_CTRL_OUT6 "DB_44"
+#define E31X_CAT_CTRL_OUT7 "DB_46"
+#define E31X_CAT_RESET "DB_48"
+#define E31X_CAT_CS "DB_50"
+#define E31X_CAT_SCLK "DB_52"
+#define E31X_CAT_MOSI "DB_54"
+#define E31X_CAT_MISO "DB_56"
+#define E31X_CAT_CTRL_IN0 "DB_58"
+#define E31X_CAT_CTRL_IN1 "DB_60"
+/* pin 62 is nc */
+/* pin 64 is nc */
+/* pin 66 is nc */
+/* pin 68 is nc */
+#define E31X_CAT_BBCLK_OUT "DB_70"
+/* pin 72 is nc */
+#define E31X_CAT_SYNC "DB_74"
+#define E31X_CAT_P1_D11 "DB_78"
+#define E31X_CAT_P1_D1 "DB_80"
+#define E31X_CAT_P1_D3 "DB_82"
+#define E31X_CAT_P1_D0 "DB_84"
+#define E31X_CAT_P1_D5 "DB_86"
+#define E31X_CAT_P1_D2 "DB_88"
+#define E31X_CAT_P1_D4 "DB_90"
+#define E31X_CAT_P1_D7 "DB_92"
+#define E31X_CAT_P1_D6 "DB_94"
+#define E31X_CAT_P1_D9 "DB_96"
+#define E31X_CAT_P1_D8 "DB_98"
+#define E31X_CAT_P1_D10 "DB_100"
+#define E31X_CAT_TX_FRAME "DB_102"
+#define E31X_CAT_FB_CLK "DB_104"
+/* pin 106 is nc */
+#define E31X_LED_TXRX1_TX "DB_108"
+#define E31X_LED_TXRX1_RX "DB_110"
+#define E31X_LED_RX1_RX "DB_112"
+#define E31X_LED_TXRX2_TX "DB_114"
+#define E31X_LED_TXRX2_RX "DB_116"
+#define E31X_LED_RX2_RX "DB_118"
+/* pin 120 is nc */
+
+#endif /* _DT_BINDINGS_PINCTRL_E3XX_H */
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/